Hyundai Excavator

Pattern Change Diagram 1

Underneath Cab Access
11. RCV LEVER OPERATING PATTERN
C Type
2 90 (Lever only) ※ Whenever a change is made
to the machine control pattern
also exchange the pattern
1 T

4
2
label in the cab to match the
3 RH 3 P
P
FRONT
2
4
Nut(24) new pattern.
T 1 LH
FRONT
Mounting bolt(77)
P
H
1 2 F
D
4 3 3 4 A
LH
2 1
1

Terminal block
H
J
G
J T
F
G
A
E
E
D
B B
R35Z74OP43

Operation Hose connection (port)

Pattern Control function RCV Change of Terminal block
Left RCV lever Right RCV lever
lever From To
ISO Type 1 Arm out ② H -
1 5
2 Arm in ④ J -
Left
3 Swing right ③ F -
4 3 8 7
4 Swing left ① G -
5 Boom lower ④ B -
6 Boom raise ② A -
Right
7 Bucket out ① D -
Hyundai 2 6
8 Bucket in ③ E -
1 Boom lower ② H B
1 5 2 Boom raise ④ J A
Left
3 Swing right ③ F -
4 3 8 7 4 Swing left ① G -
A Type
5 Arm out ④ B H
6 Arm in ② A J
Right
7 Bucket out ① D -
2 6
8 Bucket in ③ E -
1 Boom lower ② H B
1 5 2 Boom raise ④ J A
Left
3 Bucket in ③ F E
4 3 8 7
4 Bucket out ① G D
B Type
5 Arm out ④ B H
6 Arm in ② A J
Right
7 Swing right ① D F
2 6
8 Swing left ③ E G
① Loosen the RCV lever mounting bolt (77) and rotates
1 5
lever assy 90˚ counterclockwise; then install.
Left
② To put lever in correct position, disassemble nut (24)
4 3 8 7
and rotates only lever 90˚ clockwise.
C Type

Right Same as ISO type

2 6

4-21
2) PATTERN
ATTERN CHANGE VALVE INSTALL (option)
※ If the machine is equipped with the pattern change valve, the machine operation pattern can be
easily changed.
※ Whenever a change is made to the machine control pattern also exchange the pattern label in
the cab to match the new pattern.

Operation ISO type A type

1 1

4 3 4 3
Left RCV lever

2 2

5 5

8 7 8 7
Right RCV lever

6 6

(1) The machine control pattern can be easily

changed from the "ISO type" to "A type" by
PATTERN A TYPE(OPT)
changing the position of the lever. CHANGE
VALVE
Before starting the machine, check the lever
position of pattern change valve and actual
ISO TYPE(STD)
operating of attachment.

(2) Change of operating pattern

ISO TYPE(STD) A TYPE(OPT)
① Loosen the bolt (11).
② Move lever from the "ISO type" to "A type" Lever
position.
③ After the lever is set, tighten the bolt in order to
11
secure the lever. 11
Lever

R35Z94OP52

4-22
 Hyundai Excavator
Pattern Change Diagram 2
Behind Cab Access
12. RCV LEVER OPERATING PATTERN
1) PATTERN CHANGE VALVE NOT INSTALL (standard)
C Type Terminal
J block
RCV-RH 2 90 (Lever only) H ※ Whenever a change is made
RCV-LH G
F to the machine control pat-
Nut(22) E
D
tern also exchange the pat-
Mounting B tern label in the cab to
bolt(17) A
match the new pattern.
※ The hose modification works
T must be carried out between
1 2 1
4
P
4
RCV lever and ter minal
3
P 2 block (Not between terminal
3 T
1
block and MCV).

140F4OP41

Operation Hose connection (port)

Pattern Control function RCV Change of Terminal block
Left RCV lever Right RCV lever
lever From To
ISO Type 1 Arm out ② D -
1 5
2 Arm in ④ E -
Left
3 Swing right ③ B -
4 3 8 7
4 Swing left ① A -
5 Boom lower ④ J -
6 Boom raise ② H -
Right
7 Bucket out ① G -
2 6
Hyundai 8 Bucket in ③ F -
A Type 1 Boom lower ② D J
1 5
2 Boom raise ④ E H
Left
3 Swing right ③ B -
4 3 8 7 4 Swing left ① A -
5 Arm out ④ J D
6 Arm in ② H E
Right
7 Bucket out ① G -
2 6
8 Bucket in ③ F -
B Type
1 Boom lower ② D J
1 5 2 Boom raise ④ E H
Left
3 Bucket in ③ B F
4 3 8 7
4 Bucket out ① A G
5 Arm out ④ J D
6 Arm in ② H E
Right
7 Swing right ① G B
2 6
8 Swing left ③ F A
C Type ① Loosen the RCV lever mounting bolt (17) and rotates
1 5
lever assy 90˚ counterclockwise; then install.
Left
② To put lever in correct position, disassemble nut (22)
4 3 8 7
and rotates only lever 90˚ clockwise.

Right Same as ISO type

2 6

4-26
2) PATTERN
ATTERN CHANGE VALVE INSTALL (option)
※ If the machine is equipped with the pattern change valve, the machine operation pattern can
be easily changed.
※ Whenever a change is made to the machine control pattern also exchange the pattern label
in the cab to match the new pattern.
Operation ISO type A type

1 1

4 3 4 3
Left RCV lever

2 2

5 5

8 7 8 7
Right RCV lever

6 6

(1) The machine control pattern can be easily

changed from the "ISO type" to "A type" by
changing the position of the lever position.
Before starting the machine, check the lever
position of pattern change valve and actual
operating of attachment.

Bolt A TYPE(OPT)
(2) Change of operating pattern
2
① Loosen bolt. 1
② Move lever to the "ISO" or "A" position. ISO TYPE(STD)
③ After the lever is set, tighten the bolt in order Lever
to secure the lever. Pattern change valve
·Position ① for "ISO" pattern.
·Position ② for "A" pattern.
180F4OP22

4-27