Scribd Logo
Upload

Welcome to Scribd!

  • 548 views

    Job Safety Analysis: Air Compressor Operation

    Uploaded by

    Vi Vek
    This document provides a job safety analysis for operating an air compressor. It outlines 5 steps of the process: 1) Switching on water circulation, 2) Switching on the compressor, 3) Setting the required pressure, 4) Checking compressor conditions, and 5) Switching on additional distribution units. For each step, potential hazards are identified such as high pressure build up and hot surfaces. Recommended safe practices are provided to address the hazards, such as proper valve operation and checking for tagged hot zones. Personal protective equipment of helmet, goggles, gloves and safety shoes is required.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Job Safety Analysis: Air Compressor Operation

    Uploaded by

    Vi Vek
    548 views2 pages
    This document provides a job safety analysis for operating an air compressor. It outlines 5 steps of the process: 1) Switching on water circulation, 2) Switching on the compressor, 3) Setting the required pressure, 4) Checking compressor conditions, and 5) Switching on additional distribution units. For each step, potential hazards are identified such as high pressure build up and hot surfaces. Recommended safe practices are provided to address the hazards, such as proper valve operation and checking for tagged hot zones. Personal protective equipment of helmet, goggles, gloves and safety shoes is required.

    Original Title

    EM-55-Air Compressor Operation

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a job safety analysis for operating an air compressor. It outlines 5 steps of the process: 1) Switching on water circulation, 2) Switching on the compressor, 3) Setting the required pressure, 4) Checking compressor conditions, and 5) Switching on additional distribution units. For each step, potential hazards are identified such as high pressure build up and hot surfaces. Recommended safe practices are provided to address the hazards, such as proper valve operation and checking for tagged hot zones. Personal protective equipment of helmet, goggles, gloves and safety shoes is required.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    548 views2 pages

    Job Safety Analysis: Air Compressor Operation

    Uploaded by

    Vi Vek
    This document provides a job safety analysis for operating an air compressor. It outlines 5 steps of the process: 1) Switching on water circulation, 2) Switching on the compressor, 3) Setting the required pressure, 4) Checking compressor conditions, and 5) Switching on additional distribution units. For each step, potential hazards are identified such as high pressure build up and hot surfaces. Recommended safe practices are provided to address the hazards, such as proper valve operation and checking for tagged hot zones. Personal protective equipment of helmet, goggles, gloves and safety shoes is required.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    JOB SAFETY ANALYSIS

    Job: Air Compressor JSA/CTO2/ Mech/55 Prepared by: Reviewed by:


    Operation K. Vivek Sagar K. Maheswara Reddy
    Job Safety Analysis REV:00
    Date:08/04/2015
    Title of employee doing Supervisor: G.vijay Department: ESD Section: Utility(Acplant) Approved by:
    job: Air Compressor kumar/Rakesh A Harothama Reddy
    Operation Sharma/vivek sagar
    /K.Sinivasa rao
    Required / recommended PPE: Helmet with chin strip, Goggle, Cotton Hand gloves, and safety shoes.

    Sequence of Basic
    Potential Hazards Recommended Safe Job What Could Go Wrong Corrective Action
    Job Steps
    1. RT water  Personal hazard  Open inlet outlet  Due to miss operation  Proper supervision
    circulation to valves of compressor of valves pressure required
    be switched and switch on pump might buildup and
    on lines will puncture
    2. Switch on  Personal hazard  Open discharge valve  Due to miss operation  Proper supervision
    compressor of compressor and of valves pressure required
    switch on might buildup and
    lines will puncture
    3. Set required  No hazard  Set required pressure  Wrong loading and  Set based on user
    pressure in the panel unloading values set requirement
    setting
    4. checking the  Personal injury  Compressor operating  Hot zones are on  Check for hot
    compressor parameters to be compressor, so person surfaces and tag them
    condition checked might experience as hot surface.
    burns.

    Page 1 of 2
    JOB SAFETY ANALYSIS
    Job: Air Compressor JSA/CTO2/ Mech/55 Prepared by: Reviewed by:
    Operation K. Vivek Sagar K. Maheswara Reddy
    Job Safety Analysis REV:00
    Date:08/04/2015
    Title of employee doing Supervisor: G.vijay Department: ESD Section: Utility(Acplant) Approved by:
    job: Air Compressor kumar/Rakesh A Harothama Reddy
    Operation Sharma/vivek sagar
    /K.Sinivasa rao
    Required / recommended PPE: Helmet with chin strip, Goggle, Cotton Hand gloves, and safety shoes.

    Sequence of Basic
    Potential Hazards Recommended Safe Job What Could Go Wrong Corrective Action
    Job Steps
    5. Switching on  Personal injury  Keep away from vent  Pressurized air will  vent is kept at a
    the ADU line switch on mains vent and can injure a height and open to
    and open the valve to person atmosphere.
    ADU

    DESCRIPTION PREPARED BY (ESD) REVIEWED BY (ESD) APPROVED BY (ESD)

    Name

    Signature

    Date

    Page 2 of 2

    You might also like