Vehicle Immobilizer System: Key Features

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

V: 1.

eCut

Vehicle Immobilizer System Key Features:

• Highly reliable system, alerts when disrupted


eCut is an immobilizer system for theft prevention,
• Automatic, passive immobilizing system
controlled by a keypad. The eCut supports up to two
• 60 seconds passive arming
wired and one wireless cut units, using the D-Out
• Programmable PIN Code
interface, and controlled by a single keypad.
• Flashing status LED (Armed, Disarmed, Service Mode)
• Wireless cut unit
The eCut immobilizer can be used as a stand-alone
• Service mode
solution for anti-theft applications based on an
• Easy and concealed installation
advanced programmable keypad or as part of a
• Tamper proof
connected car solution with a full tracking / telematics
solution, based on ERM’s StarLink devices. • Optional - Up to 2 wired cut units

The wireless cut unit can be placed anywhere in the


vehicle, so it will wirelessly communicate with the Technical Specifications:
Keypad for maximum protection of the vehicle. • Operational voltage: 12VDC
• Cut units contacts rating:
- Wired cut unit: 10A
- Wireless cut unit: 10A
• Wireless RF cut unit frequency : 433.92Mhz
• Power consumptuin:
- Armed <15mA
- Disarmed (Ignition Off) <5mA
- Disarmed (Ignition On) < 400mA

ERM Advanced Telematics


16 Hasar Shapira St. Rishon Lezion 75704 Israel,
Tel: 972-3-9413313, Fax: 972-3-9413330
info@ermtelematics.com www.ermtelematics.com

You might also like