Scribd
Upload
140 views1 page

1

User can set up simulations in Aspen HYSYS using components from either the HYSYS Databank or Aspen Properties. When a flowsheet contains multiple recycle blocks, the Recycle Advisor can be used to ensure the minimum number of recycles are in their optimal locations and configure settings like sensitivities and calculations for each recycle. Both statements about the Recycle Advisor's functions are needed to fully characterize its capabilities, as neither statement alone is sufficient.

Uploaded by

Tamer Lord
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
140 views1 page

1

User can set up simulations in Aspen HYSYS using components from either the HYSYS Databank or Aspen Properties. When a flowsheet contains multiple recycle blocks, the Recycle Advisor can be used to ensure the minimum number of recycles are in their optimal locations and configure settings like sensitivities and calculations for each recycle. Both statements about the Recycle Advisor's functions are needed to fully characterize its capabilities, as neither statement alone is sufficient.

Uploaded by

Tamer Lord
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Sample Questions:

1. User can set up simulations using components from______________

A. HYSYS Databank

B. Aspen Properties

C. COMThermo

D. Either A or B

2. In Aspen HYSYS, when a flowsheet contains several recycle blocks, it is difficult to know simply by
examining the topology

what the ideal placement and configuration of the recycle would be. User can run the Recycle Advisor;

Statement (1) To ensure that flowsheets contain the minimum number of recycles at their optimal
locations.

Statement (2) To configure all major settings (Sensitivities, calculation level, maximum iterations etc.) for
a recycle.

A. Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient.

B. Statement (2) ALONE is sufficient, but statement (1) alone is not sufficient.

C. BOTH statements TOGETHER are sufficient, but NEITHER statement ALONE is sufficient.

D. EACH statement ALONE is sufficient.

E. Statements (1) and (2) TOGETHER are NOT sufficient.

You might also like