Chapter 8:

Subnetting IP Networks
CCNA Routing and Switching

Introduction to Networks v6.0

Al-Mansour University Cisco Networking Academy

[email protected]

07814242299
Chapter 8 - Sections & Objectives
▪ 8.1 Subnetting an IPv4 Network
• Implement an IPv4 addressing scheme to enable end-to-end connectivity in a small to
medium-sized business network.
• Explain how subnetting segments a network to enable better communication.
• Explain how to calculate IPv4 subnets for a /24 prefix.
• Explain how to calculate IPv4 subnets for a /16 and /8 prefix.
• Given a set of requirements for subnetting, implement an IPv4 addressing scheme.
• Explain how to create a flexible addressing scheme using variable length subnet masking (VLSM).

▪ 8.2 Addressing Schemes

• Given a set of requirements, implement a VLSM addressing scheme to provide
connectivity to end users in a small to medium-sized network.
• Implement a VLSM addressing scheme.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 2
Chapter 8 - Sections & Objectives (Cont.)
▪ 8.3 Address Schemes
• Explain design considerations for implementing IPv6 in a business network.
• Explain how to implement IPv6 address assignments in a business network.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 3
8.1 Subnetting an IPv4
Network

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 4
Network Segmentation
Broadcast Domains
▪ Devices use broadcasts in an Ethernet LAN to locate:
• Other devices - Address Resolution Protocol (ARP) which sends Layer 2 broadcasts to a known IPv4
address on the local network to discover the associated MAC address.
• Services – Dynamic Host Configuration Protocol (DHCP) which sends broadcasts on the local network
to locate a DHCP server.
▪ Switches propagate broadcasts out all interfaces except the interface on which it was received.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 5
Network Segmentation
Problems with Large Broadcast Domains
▪ Hosts can generate excessive broadcasts and negatively affect the network.
• Slow network operations due to the significant amount of traffic it can cause.
• Slow device operations because a device must accept and process each broadcast packet.
▪ Solution: Reduce the size of the network to create smaller broadcast domains. These smaller
network spaces are called subnets.

One
Broadcast Broadcast in Broadcast in
Domain LAN 1 LAN 2
contained in contained in
1 subnet 1 subnet

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 6
Network Segmentation
Reasons for Subnetting
▪ Reduces overall network traffic and improves network performance.

▪ Enables an administrator to implement security policies such as which subnets are allowed or not
allowed to communicate together. Communicating between
Networks

Subnetting by Location

Subnetting by Device Type

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 7
Subnetting an IPv4 Network
Octet Boundaries

Networks
are most
easily
subnetted
at the
octet
boundary
of /8, /16,
and /24

▪ Prefix length and the subnet mask are different ways of identifying the network
portion of an address.
▪ Subnets are created by borrowing host bits for network bits.
▪ More host bits borrowed, the more subnets that can be defined.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 8
Subnetting an IPv4 Network
Subnetting on the Octet Boundary

▪ Subnetting Network 10.x.0.0/16

▪ Define up to 256 subnets with each subnet capable of connecting 65,534 hosts.
▪ First two octets identify the network portion while the last two octets are for host IP addresses.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 9
Subnetting an IPv4 Network
Subnetting on the Octet Boundary (Cont.)

▪ Subnetting Network 10.x.x.0/24

▪ Define 65,536 subnets each capable of connecting 254 hosts.
▪ /24 boundary is very popular in subnetting because of number of hosts.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 10
Subnetting an IPv4 Network
Classless Subnetting
Subnetting a /24 Network

Subnets can borrow bits from any host bit position to create other masks.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 11
Subnetting an IPv4 Network
Video Demonstration – The Subnet Mask
Subnetting in Binary
▪ ANDING
• Convert IP address and Subnet Mask to Binary (line up vertically like an addition problem)
• Logically AND (1 and 1 = 1, all other combinations = 0)
• Result is network address for original IP address
▪ Classful Subnetting
• Class A /8 255.0.0.0
• Class B /16 255.255.0.0
• Class C /24 255.255.255.0

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 12
Subnetting an IPv4 Network
Video Demonstration – The Subnet Mask (Cont.)

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 13
Subnetting an IPv4 Network
Video Demonstration – Subnetting with the Magic Number

▪ Magic number technique used to calculate subnets

▪ Magic number is simply the place value of the last one in the subnet mask

▪ /25 11111111.11111111.11111111.10000000 magic number = 128

▪ /26 11111111.11111111.11111111.11000000 magic number = 64

▪ /27 11111111.11111111.11111111.11100000 magic number = 32

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 14
Subnetting an IPv4 Network
Video Demonstration – Subnetting with the Magic Number (Cont.)

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 15
Subnetting an IPv4 Network
Video Demonstration – Subnetting with the Magic Number (Cont.)

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 16
Subnetting an IPv4 Network
Classless Subnetting Example

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 17
Subnetting an IPv4 Network
Creating 2 Subnets
▪ /25 Subnetting Topology

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 18
Subnetting an IPv4 Network
Video Demonstration – Creating Two Equal-sized Subnets (/25)
Create 2 Equal-sized Subnets from 192.168.1.0 /24
▪ Subnet Mask - 11111111.11111111.11111111.10000000

▪ Magic Number = 128

▪ 192.168.1.0 /25 (start at 0)

▪ 192.168.1.128 /25 (Add 128)

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 19
Subnetting an IPv4 Network
Subnetting Formulas

Calculate Number of Subnetting a /24 Network

Subnets Formula

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 20
Subnetting an IPv4 Network
Subnetting Formulas (Cont.)

Calculate Number of
Calculating the Number of Hosts
Hosts Formula

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 21
Subnetting an IPv4 Network
Creating 4 Subnets
▪ /26 Subnetting Topology

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 22
Subnetting an IPv4 Network
Creating 4 Subnets (Cont.)
▪ /26 Subnetting Topology

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 23
Subnetting an IPv4 Network
Creating 4 Subnets (Cont.)
▪ /26 Subnetting Topology

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 24
Subnetting an IPv4 Network
Video Demonstration – Creating Four Equal-sized Subnets (/26)
Create 4 Equal-sized Subnets from 192.168.1.0 /24
▪ Subnet Mask in Binary – 11111111.11111111.11111111.11000000

▪ 2^2 = 4 Subnets

▪ Magic Number = 64

▪ 192.168.1.0 /26

▪ 192.168.1.64 /26

▪ 192.168.1.128 /26

▪ 192.168.1.192 /26

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 25
Subnetting an IPv4 Network
Video Demonstration – Creating Eight Equal-sized Subnets (/27)

Create 8 Equal-sized Subnets from 192.168.1.0 /24

▪ Borrow 3 bits – 11111111.11111111.11111111.11100000

▪ Magic Number = 32
▪ 192.168.1.0 /27 (Start at 0)
▪ 192.168.1.32 /27 (Add 32 to previous network)
▪ 192.168.1.64 /27 (Add 32)
▪ 192.168.1.96 /27 (Add 32)
▪ 192.168.1.128 /27 (Add 32)
▪ 192.168.1.160 /27 (Add 32)
▪ 192.168.1.192 /27 (Add 32)
▪ 192.168.1.224 /27 (Add 32)

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 26
Subnetting a /16 and /8 Prefix
Creating Subnets with a /16 prefix

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 27
Subnetting a /16 and /8 Prefix
Creating 100 Subnets with a /16 prefix

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 28
Subnetting a /16 and /8 Prefix
Calculating the Hosts

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 29
Subnetting a /16 and /8 Prefix
Video Demonstration – Creating One Hundred Equal-sized Subnets
▪ An enterprise network requires 100 equal-sized subnets
starting from 172.16.0.0/16
• New Subnet Mask
• 11111111.11111111.11111110.00000000
• 2^7 = 128 Subnets
• 2^9 = 512 hosts per subnet
• Magic Number = 2
• 172.16.0.0 /23
• 172.16.2.0 /23
• 172.16.4.0 /23
• 172.16.6.0 /23
• …
• 172.16.254.0 /23

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 30
Subnetting a /16 and /8 Prefix
Creating 1000 Subnets with a /8 Network

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 31
Subnetting a /16 and /8 Prefix
Creating 1000 Subnets with a /8 Network (Cont.)

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 32
Subnetting a /16 and /8 Prefix
Video Demonstration – Subnetting Across Multiple Octets

New Challenge Problem: Create

over 300 Equal-sized Subnets of
20,000 Hosts each starting from
10.0.0.0/8

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 33
Subnetting to Meet Requirements
Subnetting Based on Host Requirements

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 34
Subnetting to Meet Requirements
Subnetting Based On Network Requirements

Host devices
used by
employees in
the Engineering
department in
one network
and
Management in
a separate
network.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 35
Subnetting to Meet Requirements
Network Requirement Example

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 36
Subnetting to Meet Requirements
Network Requirement Example (Cont.)

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 37
Subnetting to Meet Requirements
Lab – Calculating IPv4 Subnets

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 38
Subnetting to Meet Requirements
Packet Tracer – Subnetting Scenario

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 39
Subnetting to Meet Requirements
Lab – Designing and Implementing a Subnetted IPv4 Addressing Scheme

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 40
Benefits of Variable Length Subnet Masking
Traditional Subnetting Wastes Addresses

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 41
Benefits of Variable Length Subnet Masking
Variable Length Subnet Masks (VLSM)
Traditional Subnets of Varying Sizes

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 42
Benefits of Variable Length Subnet Masking
Basic VLSM
Basic Subnetting

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 43
Benefits of Variable Length Subnet Masking
Video Demonstration – VLSM Basics
▪ Basic VLSM
• Subnets do not have to be equal sizes, as long
as their address ranges do not overlap.
• When creating subnets it is easier to work from
larger to smaller.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 44
Benefits of Variable Length Subnet Masking
VLSM in Practice

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 45
Benefits of Variable Length Subnet Masking
VLSM Chart

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 46
Benefits of Variable Length Subnet Masking
Video Demonstration – VLSM Example
▪ Given the network 172.16.0.0
/23 = 2^9 hosts = 512
/23 creates subnets: 256+128+64+32+16+16 = 512 hosts needed
• 1 network for 200 hosts - 256 Address range 172.16.0.0 – 172.16.1.255
• 1 network for 100 hosts - 128
• 1 network for 50 hosts - 64
• 1 network for 25 hosts - 32
• 1 network for 10 hosts - 16
• 4 point-to-point networks for 2
hosts each – 4x4 = 16
172.16.1.248 /30 (4)
172.16.1.252 /30 (4)

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 47
8.2 Addressing Schemes

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 48
Structured Design
Network Address Planning

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 49
Structured Design
Planning to Address the Network
▪ Each host in an internetwork must have
a unique address.
▪ Need proper planning & documentation.

▪ Must provide & control access to servers

from internal hosts and external hosts.
▪ Layer 3 STATIC address assigned to a
server can be used to control access to
that server.
▪ Monitoring security and performance of
hosts means network traffic is examined
for source IP addresses that are
generating or receiving excessive
packets.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 50
Structured Design
Assigning Addresses to Devices
▪ Devices that require addresses:

• End user clients

• Can be set for DHCP to save time and
manual errors.
• A change in the subnetting scheme requires
reconfiguration of DHCP server. IPv6 clients
use DHCPv6/SLAAC.
• Servers
• Configured with static addresses.
• Private addresses translated to public
addresses if accessible from the Internet.
• Intermediary devices
• Set with static addresses for remote
management.
• Gateway
• Router interface used to exit the network.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 51
Structured Design
Packet Tracer – Designing and Implementing a VLSM Addressing Scheme

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 52
Structured Design
Lab – Designing and Implementing a VLSM Addressing Scheme

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 53
8.3 Design Considerations for IPv6

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 54
Subnetting an IPv6 Network
The IPv6 Global Unicast Address
▪ IPv6 subnetting is not concerned
with conserving address space. Structure
▪ IPv6 subnetting is about building an
addressing hierarchy based on the
number of subnetworks needed.

▪ IPv6 link-local address is never

subnetted.
▪ IPv6 global unicast address can be
subnetted.
▪ IPv6 global unicast address
normally consists of a /48 global
routing prefix, a 16 bit subnet ID,
and a 64 bit interface ID.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 55
Subnetting an IPv6 Network
Subnetting Using the Subnet ID

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 56
Subnetting an IPv6 Network
IPv6 Subnet Allocation

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 57
Subnetting an IPv6 Network
Packet Tracer – Implementing a Subnetted IPv6 Addressing Scheme

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 58
8.4 Chapter Summary

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 59
Conclusion
Packet Tracer - Skills Integration Challenge

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 60
Conclusion
Chapter 8: Subnetting IP Networks
▪ Implement an IPv4 addressing scheme to enable end-to-end connectivity in a small to medium-
sized business network.
▪ Given a set of requirements, implement a VLSM addressing scheme to provide connectivity to end
users in a small to medium-sized network.
▪ Explain design considerations for implementing IPv6 in a business network.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 61