Scribd Logo
Upload

Welcome to Scribd!

  • 116 views

    Form 1.1 Self-Assessment Checklists: CAN I... ?

    Uploaded by

    Kindly Legarte
    The document contains forms for conducting a skills self-assessment for a computer systems servicing training program. Form 1.1 allows trainees to indicate their ability to perform various competencies. Form 1.2 provides a way to document evidence of existing skills. By comparing the self-assessment and evidence, Form 1.3 identifies any gaps between required and current skills. These gaps are then converted into a training needs assessment in Form 1.4 to guide curriculum planning.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Form 1.1 Self-Assessment Checklists: CAN I... ?

    Uploaded by

    Kindly Legarte
    116 views5 pages
    The document contains forms for conducting a skills self-assessment for a computer systems servicing training program. Form 1.1 allows trainees to indicate their ability to perform various competencies. Form 1.2 provides a way to document evidence of existing skills. By comparing the self-assessment and evidence, Form 1.3 identifies any gaps between required and current skills. These gaps are then converted into a training needs assessment in Form 1.4 to guide curriculum planning.

    Original Title

    SELF-ASSESSMENT CHECKLISTS.docx

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains forms for conducting a skills self-assessment for a computer systems servicing training program. Form 1.1 allows trainees to indicate their ability to perform various competencies. Form 1.2 provides a way to document evidence of existing skills. By comparing the self-assessment and evidence, Form 1.3 identifies any gaps between required and current skills. These gaps are then converted into a training needs assessment in Form 1.4 to guide curriculum planning.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    116 views5 pages

    Form 1.1 Self-Assessment Checklists: CAN I... ?

    Uploaded by

    Kindly Legarte
    The document contains forms for conducting a skills self-assessment for a computer systems servicing training program. Form 1.1 allows trainees to indicate their ability to perform various competencies. Form 1.2 provides a way to document evidence of existing skills. By comparing the self-assessment and evidence, Form 1.3 identifies any gaps between required and current skills. These gaps are then converted into a training needs assessment in Form 1.4 to guide curriculum planning.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 5

    FORM 1.

    1 SELF-ASSESSMENT CHECKLISTS
    INSTRUCTIONS: This Self-Check Instrument will give the trainer necessary
    data or information which is essential in planning training
    sessions. Please check the appropriate box of your answer to
    the questions below.
    CORE COMPETENCIES
    CAN I...? YES NO
    UC1 INSTALL AND CONFIGURE COMPUTER SYSTEMS
    LO 1.1 Assemble computer hardware 
    LO 1.2 Prepare installer 
    LO 1.3 Install operating system and drivers for peripherals/devices 
    LO 1.4 Install application software 
    LO 1.5 Conduct testing and documentation 
    UC2 SET-UP COMPUTER NETWORKS
    LO 2.1 Install network cables 
    LO 2.2 Set network configuration 
    LO 2.3 Set router/WI-FI/wireless access poing/repeater configuration 
    LO 2.4 Inspect and test the configured computer networks 
    UC3 SET-UP COMPUTER SERVERS
    LO 3.1 Set-up user access 
    LO 3.2 Configure network services 
    LO 3.3 Perform testing documentation and pre-deployment procedures 
    UC4 MAINTAIN AND REPAIR COMPUTER SYSTEMS AND NETWORKS
    LO 4.1 Plan and prepare for maintenance and repair 
    LO 4.2 Maintain computer systems and networks 
    LO 4.3 Diagnose faults of computer systems and networks 
    LO 4.4 Rectify/correct defects in computer systems and networks 
    LO 4.5 Inspect and test the computer systems and networks 

    Note: In making the Self-Check for your Qualification, all required


    competencies should be specified. It is therefore required of a
    Trainer to be well- versed of the CBC or TR of the program
    qualification he is teaching.

    Computer Systems Date Developed PAGES


    Servicing NC II June 2020 Page 1 of 5
    EVIDENCE/ PROOF OF CURRENT COMPETENCIES

    Form 1.2: Evidence of current competencies acquired related to


    job/occupation

    Current
    Proof/Evidence Means of Validating
    Competencies
    INSTALL AND Portfolio
    CONFIGURE Industry Practitioner Interview
    COMPUTER SYSTEMS Observation
    Portfolio
    SET-UP COMPUTER
    Industry Practitioner Interview
    SERVERS
    Observation
    MAINTAIN AND REPAIR Portfolio
    COMPUTER SYSTEMS & Industry Practitioner Interview
    NETWORKS Observation

    Computer Systems Date Developed PAGES


    Servicing NC II June 2020 Page 2 of 5
    IDENTIFYING TRAINING GAPS

    From the accomplished Self-Assessment Check (Form 1.1) and the


    evidences of current competencies (Form 1.2), the Trainer will be able to
    identify what the training needs of the prospective trainee are.

    Form 1.3 Summary of current competencies versus required


    competencies

    Required Units of Competency/Learning Training


    Current Competencies
    Outcomes Based on CBC Gaps/Requirements
    1. Install and configure computer systems
    Assemble computer
    1.1 Assemble computer hardware
    hardware
    1.2 Prepare installer Prepare installer
    Install operating system and
    1.3 Install operating system and drivers for
    drivers for
    peripherals/devices
    peripherals/devices
    1.4 Install application software Install application software
    Conduct testing and
    1.5 Conduct testing and documentation
    documentation
    Required Units of Competency/Learning Training
    Current Competencies
    Outcomes Based on CBC Gaps/Requirements
    2. Set-up computer networks
    Install network
    2.1 Install network cables
    cables
    Set network
    2.2 Set network configuration
    configuration
    Set router/WIFI
    2.3 Set router/WI-FI/wireless access
    wireless access
    point/repeater configuration
    point/repeater
    configuration
    Inspect and test the
    2.4 Inspect and test the configured
    configured computer
    computer networks
    networks
    Required Units of Competency/Learning Training
    Current Competencies
    Outcomes Based on CBC Gaps/Requirements
    3. Set-up computer servers
    3.1 Set-up user access Set-up user access
    3.2 Configure network services
    Configure network services
    3.3 Perform testing documentation and pre- Perform testing

    Computer Systems Date Developed PAGES


    Servicing NC II June 2020 Page 3 of 5
    documentation and pre-
    deployment procedures
    deployment procedures
    Required Units of Competency/Learning Training
    Current Competencies
    Outcomes Based on CBC Gaps/Requirements
    4. Maintain and repair computer systems and networks
    4.1 Plan and prepare for maintenance and Plan and Prepare for
    repair Maintenance and repair
    4.2 Maintain computer systems and Maintain computer
    networks systems and networks
    4.3 Diagnose faults of computer systems Diagnose faults of computer
    and networks systems and networks
    Rectify/correct defects in
    4.4 Rectify/correct defects in computer
    Computer systems and
    systems and networks
    networks
    Inspect and test the
    4.5 Inspect and test the computer systems
    computer systems and
    and networks
    networks

    Computer Systems Date Developed PAGES


    Servicing NC II June 2020 Page 4 of 5
    Using Form No.1.4, Convert the Training Gaps into a Training Needs/
    Requirements. Refer to the CBC in identifying the Module Title or Unit of
    Competency of the training needs identified.

    FORM NO. 1.4: TRAINING NEEDS

    Training Needs Module Title / Module of


    (Learning Outcome) Instruction

    LO 2.1 Install network cables

    LO 2.2 Set network configuration


    SETTING – UP
    COMPUTER
    LO 2.3 Set router/Wi-Fi/ wireless access NETWORKS
    point/repeater configuration

    LO 2.4 Inspect and test the configured


    computer networks

    Computer Systems Date Developed PAGES


    Servicing NC II June 2020 Page 5 of 5

    You might also like