AZ850

MICROMINIATURE
POLARIZED RELAY
FEATURES
• Microminiature size: Height: .197 inches (5 mm);
Length: .551 inches (14 mm); Width: .354 inches (9 mm)
• High sensitivity, 79 mW pickup
• Monostable and bistable (latching) single coil and
two coil versions available
• Meets FCC Part 68.302 1500 V lightning surge
• DIP terminal layout, fits 10 pin IC socket
• Epoxy sealed
• UL, CUR file E43203
CONTACTS GENERAL DATA
Arrangement DPDT (2 Form C) Life Expectancy Minimum operations
Bifurcated crossbar contacts Mechanical 1 x 108
Electrical 2 x 105 at 1 A, 30 VDC, resistive
Ratings Resistive load: 1 x 105 at 0.5 A, 125VAC, resistive
Max. switched power: 30 W or 62.5 VA
Operate Time (typical) 2 ms at nominal coil voltage
Max. switched current: 1 A
Max. switched voltage: 220 VDC* or 250 VAC Release Time (typical) 1 ms at nominal coil voltage
Max. carry current: 2A (with no coil suppression)
* Note: If switching voltage is greater than 30 VDC,
Set Time 2 ms at nominal coil voltage (typical)
special precautions must be taken.
Please contact the factory.
(bistable versions) Recommended coil pulse: 20 ms

Rated Load Reset Time 2 ms at nominal coil voltage (typical)

UL, CUR 1 A at 30 VDC resistive (bistable versions) Recommended coil pulse: 20 ms
0.5 A at 125 VAC resistive Dropout Greater than 10% of nominal coil voltage
Material Silver palladium; gold clad Capacitance Contact to contact: 0.4 pF
Resistance < 50 milliohms initially Contact set to contact set: 0.2 pF
Contact to coil: 0.9 pF

Dielectric Strength 1000 Vrms between contact sets

COIL (Polarized) (at sea level) 1000 Vrms across contacts
1000 Vrms contact to coil
Power Meets FCC part 68.302 1500 V lightning
At Pickup Voltage Single side stable: 79–169 mW surge
(typical) Bistable (latching) single coil: 56–84 mW
Bistable (latching) two coil: 113–169 mW Insulation Resistance 1000 megohms min. at 25°C, 500 VDC,
50% RH
Max. Continuous 875 mW at 20°C (68°F) ambient
Dissipation Ambient Temperature At nominal coil voltage
Temperature Rise 18°C (32°F) at nominal coil voltage Operating -40°C (-40°F) to 70°C (158°F)
Storage -40°C (-40°F) to 105°C (221°F)
Temperature Max. 105°C (221°F)
Vibration .130" (3.3 mm) DA at 10–55 Hz

Shock 50 g

NOTES Enclosure LCP

1. All values at 20°C (68°F). Terminals Tinned copper alloy, P.C.

2. Relay has fixed coil polarity.
Max. Solder Temp. 250°C (482°F)
3. Relay may pull in with less than “Must Operate” value.
4. Relay adjustment may be affected if undue pressure is exerted Max. Solder Time 5 seconds
on relay case. Max. Solvent Temp. 80°C (176°F)
5. For complete isolation between the relay’s magnetic fields, it is Max. Immersion Time 30 seconds
recommended that a .197" (5.0 mm) space be provided between
adjacent relays. Weight 1.5 grams
6. Specifications subject to change without notice. Packing unit in pcs 25 per plastic tube / 1000 per carton box

ZETTLER electronics GmbH

Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 [email protected]
Fax +49 89 800 97 200 www.ZETTLERelectronics.com
2005-08-04
China
AZ850
RELAY ORDERING DATA
COIL SPECIFICATIONS
Standard Coil: Monostable
Nominal Coil Must Operate Max. Continuous Coil Resistance ORDER NUMBER
VDC VDC VDC Ohm ± 10%
3 2.25 7.5 64.3 AZ850–3
4.5 3.4 11.25 145.2 AZ850-4.5
5 3.75 12.5 178 AZ850–5
6 4.5 15.0 257 AZ850–6
9 6.75 22.5 579 AZ850–9
12 9.0 30.0 1,028 AZ850–12
24 18.0 48.0 2,880 AZ850–24
48 36.0 80.0 7,680 AZ850-48 *
* Not UL Approved

Bistable (Latching): 1 Coil

Nominal Coil Set-/Reset Max. Continuous Coil Resistance ORDER NUMBER
VDC VDC VDC Ohm ± 10%
3 2.25 8.7 90 AZ850P1–3
4.5 3.4 13.0 203 AZ850P1-4.5
5 3.75 14.5 250 AZ850P1–5
6 4.5 17.4 360 AZ850P1–6
9 6.75 26.1 810 AZ850P1–9
12 9.0 34.8 1,440 AZ850P1–12
24 18.0 57.6 3,840 AZ850P1–24

Bistable (Latching): 2 Coils

Nominal Coil Set-/Reset Max. Continuous Coil Resistance ORDER NUMBER
VDC VDC VDC Ohm ± 10%
3 2.25 6.0 45 AZ850P2–3
4.5 3.4 13.0 102 AZ850P2-4.5
5 3.75 10.0 125 AZ850P2–5
6 4.5 12.0 180 AZ850P2–6
9 6.75 18.0 405 AZ850P2–9
12 9.0 24.0 720 AZ850P2–12
24 18.0 40.0 1,920 AZ850P2–24

MECHANICAL DATA
.551 .354 PC BOARD L AYOUT
[14.0] [9.00]
.010
.197
[0.25]
[5.0]
.027 10 x ø .032
[0.69] [0.8]
4x.100 10x.138 10x.010
[2.54] 10x.020 [3.5] [0.25]
.300
[0.51] [7.63]
.300
[7.62]
WIRING DIAGRAMS
SINGLE SIDE STABLE BISTABLE (LATCHING) TWO COIL
1 2 3 4 5 1 2 3 4 5 Set Coil
(+)
.075
(+) (-) [1.90]
Diagrams show the "reset" 4 x .100
Stripe on top of relay
indicates the position position before energized [2.54]
of pins 1 & 10 with polarity as shown.
(+) (-)
(-)

10 9 8 7 6 10 9 8 7 6 Reset Coil
VIEWED TOWARDS TERMINALS
DEENERGIZED OR RESET CONDITION RESET CONDITION
Watch for polarity Watch for polarity

VIEWED TOWARDS TERMINALS

Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010"

ZETTLER electronics GmbH

Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 [email protected]
Fax +49 89 800 97 200 www.ZETTLERelectronics.com
2005-08-04
China