Cat 980L ®

Wheel Loader
2017

The new 980L Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your
high expectations for reliability, productivity, fuel efficiency, and long service life. Meets China Nonroad Stage III emission standards,
U.S. EPA Tier 2/EU Stage II or Tier 3/Stage IIIA equivalent emission standards, depending on emission standards of specific country.

Reliability Ease of Operation

• Cat C13 ACERT ™ engine of fers increased power.
®
• New best-in-class operator environment provides unmatched
• Utilizing rigorous component design and machine validation processes comfor t, visibilit y, and ef ficiency.
results in unmatched reliabilit y, durabilit y and high uptime. • Intuitive, ergonomic controls keep operators focused on their work.
• Optional new ride control sys tem with dual accumulators provides
Durability excellent ride qualit y and lowers cab vibrations.
• Heav y-dut y powershif t transmission and axles handle ex treme
applications. Safety
• Improved hydraulic hose routing reduces potential hose wear. • E xcellent cab access with wide door and stair-like steps.
• Full flow hydraulic filtration sys tem with additional loop filtration • Floor to ceiling windshield, large mirrors with integrated spot mirrors
improves hydraulic system robustness and component life. and rear vision camera provide industr y leading all-around visibilit y.
• Robust , repositioned grab bars provide safe access to the machine.
Productivity
• Engine power increased by approximately 5% improves machine Serviceability
per formance and response (compared to H Series). • One-piece tilting hood with side and rear doors; hydraulic
• Lock-up clutch torque conver ter, combined with lock-to-lock shif ting, and electrical ser vice centers make access fas t and easy.
delivers smooth shif ts, fast acceleration and speed on grade. • Safe, ground level access to fuel fill and daily maintenance points
• High capacit y torque conver ter results in greater digging ef ficiency. means less ser vicing time is required.
• Z-bar linkage provides high breakout force at ground level. • Optional, fully integrated Cat Autolube system provides full lube
• Optional high lif t linkage of fers increased hinge pin height to load system monitoring and diagnostic tes t visibilit y.
more easily in a variet y of applications.
• Easy-to-load Per formance Series Buckets feature a wider mouth
Cat Connect Technology
and cur ved side plates that improve material retention (fill factor) • Monitor, manage and enhance job site operations.
and decrease cycle times. • Cat LINK Technologies: VisionL ink ® enables owners to access data
• Optional limited slip dif ferentials improve per formance in the pile wirelessly to monitor machine health, utilization and location.
and poor under foot conditions. • Cat DE TEC T Technologies: Integrated rear vision camera enhances
• Optional Aggregate Handler configuration of fers slightly higher visibilit y behind machine to help operators work safely. Optional
payload capabilit y for loose aggregate rehandling.* Cat Rear Object Detection increases operator awareness of the
working environment which enhances site safet y.
Fuel Efficiency • Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0
• Up to 2 5% lower fuel consumption than H Series.* * brings simple and accurate on-the-go payload scale allowing
• Power dense ACER T engine burns less fuel by providing power operators to deliver exact loads and work more ef ficiently. Advanced
and torque when needed. Productivit y subscription provides comprehensive actionable
• Per formance Series Buckets feature a longer floor that easily information to help you manage and improve the productivit y and
digs through the pile resulting in lower fuel consumption. profi tabilit y of your operations.
• Load sensing hydraulics result in propor tional flow for implement
and steering on demand. * *Actual results may var y based on factors such as, but not limited to, machine
• S tandard productive Economy Mode provides maximum fuel configuration, operator technique, machine application, climate, etc.
savings with minimal productivit y impact .

*Optional configurations and equipment may var y from region to region

and requires conformance to Caterpillar payload policy. Consult your dealer
or Caterpillar representative for details.
Cat 980L Wheel Loader
®

Engine Transmission
Engine Model Cat C13 ACERT For ward 1 6.9 km/h
Max Power @ 1, 8 0 0 rpm – ISO 14 3 9 6 (metric) 3 0 3 kW (412 hp) For ward 2 13. 3 km/h
Max Net Power @ 1, 8 0 0 rpm – ISO 9 24 9 (metric) 278 kW (3 78 hp) For ward 3 2 3.5 km / h
Peak Gross Torque (1, 3 0 0 rpm) – ISO 14 39 6 2172 N·m For ward 4 3 9.5 km/h
Maximum Net Torque (1, 0 0 0 rpm) 2 0 4 0 N·m Reverse 1 7.8 km/h
Displacement 12.5 L Reverse 2 15.2 km/h
Reverse 3 2 6.9 km/h
Weight Reverse 4 3 9.5 km/h
Operating Weight 3 0 0 9 0 kg • Maximum travel speed in standard vehicle with empt y bucket and
standard L 4 tires with 9 3 3 mm roll radius.
• Weight based on a machine configuration with Michelin 29.5R 2 5 X L DD1 L4
radial tires, full fluids, operator, standard counter weight, cold star t, roading
fenders, Product Link™, open dif ferential axles (front /rear), secondar y Service Fill Capacities
steering, sound suppression, and a 5.4 m³ general purpose bucket Fuel Tank 42 6 L
with BOCE. Cooling System 45 L
Crankcase 37 L
Bucket Capacities Transmission 77 L
Bucket Range 4.2-12.2 m ³ Dif ferentials and F inal Drives – Front 84 L
Dif ferentials and F inal Drives – Rear 84 L
Operating Specifications Hydraulic Tank 15 3 L
S tatic Tipping Load – Full 3 7° Turn –
19 5 6 5 kg
with Tire Deflection
Hydraulic System
S tatic Tipping Load – Full 3 7° Turn –
Variable
20 79 6 kg Implement Pump Type
No Tire Deflection Displacement Piston
Breakout Force 2 24 kN Implement System:
• For a machine configuration as defined under “ Weight.” Maximum Pump Output (2 , 2 5 0 rpm) 4 4 9 L /min
• Full compliance to ISO 14 3 9 71:20 07 Sections 1 thru 6, which requires Maximum Operating Pressure 3 4 3 0 0 kPa
2% verification bet ween calculations and testing. Hydraulic Cycle Time – Total 10.1 Seconds

Sound Dimensions
With Cooling Fan Speed at Maximum Speed: Standard Lif t High Lif t
Operator Sound Pressure Level (ISO 6 3 9 6:2 0 0 8) 75 dB(A) Height to Top of Hood 3110 mm 3110 mm
E x terior Sound Power Level (ISO 6 3 95:2 0 0 8) 112 dB(A) Height to Top of E xhaust Pipe 374 6 mm 374 6 mm
E x terior Sound Pressure Level (SAE J8 8:2 013) 78 dB(A)* Height to Top of ROPS 3 813 mm 3 813 mm
*Distance of 15 m, moving for ward in second gear ratio. Ground Clearance 4 5 3 mm 4 5 3 mm
With Cooling Fan Speed at 70% of Maximum Value:* * Center Line of Rear A xle to Edge
26 0 8 mm 26 0 8 mm
Operator Sound Pressure Level (ISO 6 3 9 6:2 0 0 8) 72 dB(A) of Counter weight
E x terior Sound Power Level (ISO 6 3 95:2 0 0 8) 10 9 L WA*** Center Line of Rear A xle to Hitch 19 0 0 mm 19 0 0 mm
* *For machines in countries that adopt the “EU Directives.” Wheelbase 3 8 00 mm 3 8 00 mm
* * *European Union Directive “2 0 0 0 /14 / EC” as amended by “20 05 / 8 8 /EC.” Overall Length (without bucket) 8 214 mm 8 3 0 2 mm
Hinge Pin Height at Maximum Lif t 4 5 3 9 mm 476 0 mm
Hinge Pin Height at Carr y 6 21 mm 678 mm
Lif t Arm Clearance at Maximum Lif t 3 795 mm 4 010 mm
Rack Back at Maximum Lif t 61 degrees 61 degrees
Rack Back at Carr y Height 4 8 degrees 4 8 degrees
Rack Back at Ground 4 0 degrees 3 9 degrees
Maximum W idth over Tires 3 29 6 mm 3 29 6 mm
Tread W idth 24 4 0 mm 24 4 0 mm
• All dimensions are approximate and based on Michelin 29.5R2 5 X LDD1 L4
radial tires.

F or more complete infor mation on Cat product s, dealer ser vices, and indus tr y solutions, v isit us on the web at www.cat.com AE XQ19 37-01
© 2 017 Caterpillar Replaces AE XQ19 37
All rights reser ved (AME, CIS, GN1, GN2 , India,
Materials and speci fications are subject to change wi thou t not ice. Feat ured machines in photos may include addi tional equipment .
Indonesia, L ACD, Southeast Asia)
See your Cat dealer for available opt ions .

C AT, C AT E RPIL L A R , S A F E T Y.CAT.COM, their respective logos, “Caterpillar Yellow ” and t he “Power Edge” trade dress, as well as
corporate and product iden ti t y used herein, are trademarks of Caterpillar and may not be used wi thout permission.

V isionL ink is a trademark of Trimble Nav igation L imi ted, registered in the Uni ted S tates and in o ther count ries .