Scribd Logo
Upload

Welcome to Scribd!

  • 87 views

    Estar 4030 HT PDF

    Uploaded by

    hendrik k
    This document provides information about a synthetic ester-based lubricant called Fluostar 2 L Estar 4030 HT that is stabilized for high temperatures up to 250°C. It contains additives that provide extreme pressure protection, anti-wear properties, anti-oxidation, and prevents rust and corrosion. The lubricant has a weak surface tension allowing for an anti-drip quality and evaporates slowly without cokefaction or residue formation up to 250°C. It is typically used for chains, tracks, and rollers in textile, particle board pressing, and polymerization equipment that are subjected to high temperatures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Estar 4030 HT PDF

    Uploaded by

    hendrik k
    87 views1 page
    This document provides information about a synthetic ester-based lubricant called Fluostar 2 L Estar 4030 HT that is stabilized for high temperatures up to 250°C. It contains additives that provide extreme pressure protection, anti-wear properties, anti-oxidation, and prevents rust and corrosion. The lubricant has a weak surface tension allowing for an anti-drip quality and evaporates slowly without cokefaction or residue formation up to 250°C. It is typically used for chains, tracks, and rollers in textile, particle board pressing, and polymerization equipment that are subjected to high temperatures.

    Original Title

    ESTAR 4030 HT.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a synthetic ester-based lubricant called Fluostar 2 L Estar 4030 HT that is stabilized for high temperatures up to 250°C. It contains additives that provide extreme pressure protection, anti-wear properties, anti-oxidation, and prevents rust and corrosion. The lubricant has a weak surface tension allowing for an anti-drip quality and evaporates slowly without cokefaction or residue formation up to 250°C. It is typically used for chains, tracks, and rollers in textile, particle board pressing, and polymerization equipment that are subjected to high temperatures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    87 views1 page

    Estar 4030 HT PDF

    Uploaded by

    hendrik k
    This document provides information about a synthetic ester-based lubricant called Fluostar 2 L Estar 4030 HT that is stabilized for high temperatures up to 250°C. It contains additives that provide extreme pressure protection, anti-wear properties, anti-oxidation, and prevents rust and corrosion. The lubricant has a weak surface tension allowing for an anti-drip quality and evaporates slowly without cokefaction or residue formation up to 250°C. It is typically used for chains, tracks, and rollers in textile, particle board pressing, and polymerization equipment that are subjected to high temperatures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Version : September 2016

    FLUOSTAR 2 L ESTAR 4030 HT


    DESCRIPTION
    A fluid lubricant of synthetic based ester oils, stabilized for high temperatures. Contains special
    additives, extreme-pressure, anti-wear, anti-oxidation, rust and corrosion. In addition, a weak surface
    tension allows an anti-drip quality. ESTAR 4030 HT evaporates very slowly without cokefaction up to
    250 °C.
    TECHNICAL DATA SHEET

    TYPICAL APPLICATIONS
    - Chains and tracks for textile reams,
    - Chains and rollers for continuous particle board presses,
    - Chains and bearings situated in stoves & dryers for polymerisation.

    TECHNICAL CHARACTERISTICS

    PROPERTIES VALUES UNITS STANDARDS


    Color Amber (visual)
    3
    Mass volume (20°C) 930 Kg/m ISO 12185
    Base oil Ester
    Kinematic viscosity at
    4030 mm²/s ISO 3104
    40°C
    Viscosity index 150 ISO 2909
    Flash point 260 °C ISO 2592
    Fire point 305 °C ISO 2592
    Pour point <-10 °C ISO 3016
    Copper corrosion test 1a quotation ISO 2160

    All information contained here is given in good faith. It is provided without warranty, express or implied, and is subjected to change without notice.

    You might also like