We are IntechOpen,

the world’s leading publisher of

Open Access books
Built by scientists, for scientists

4,500
Open access books available
118,000
International authors and editors
130M Downloads

Our authors are among the

154
Countries delivered to
TOP 1%
most cited scientists
12.2%
Contributors from top 500 universities

Selection of our books indexed in the Book Citation Index

in Web of Science™ Core Collection (BKCI)

Interested in publishing with us?

Contact [email protected]
Numbers displayed above are based on latest data collected.
For more information visit www.intechopen.com
 Chapter 1

The Evolution of Quality Concepts and the Related

Quality Management

Ching-Chow Yang
Ching-Chow Yang
Additional information is available at the end of the chapter

Additional information is available at the end of the chapter

http://dx.doi.org/10.5772/67211

Abstract
Enterprises usually adopt some quality practices to control the product quality during
the manufacturing process in order to assure the delivery of qualitative good products
to customers. The quality practices or quality management systems adopted by indus‐
tries will further evolve due to the changes of quality concepts as time goes by. This
chapter discusses the change of quality concepts and the related revolution of quality
management systems in the past century. The quality concepts were gradually changed
from the achievement of quality standards, satisfaction of customer needs, and expecta‐
tions to customer delight. Since merely satisfying customers is not enough to ensure
customer loyalty, the enterprises gradually focus on customers’ emotional responses and
their delight in order to pursue their loyalty. The emotion of “delight” is composed of
“joy” and “surprise,” which can be achieved as the customers’ latent requirements are
satisfied. Thus, the concept of “customer delight” and the means to provide the inno‐
vative quality so as to meet the unsatisfied customers’ latent needs are elaborated on.
Finally, a framework of innovation creation is developed that is based on the mining of
customer's latent requirements. This outline will manifest the essential elements of the
related operation steps.

Keywords: quality concept, customer satisfaction, customer delight, customers’ latent

requirement, innovation creation system

1. Introduction

It is widely recognized that consumers only buy the goods with good quality, desired func‐
tions, and accepted price [1]. Therefore, industries always adopt several management prac‐
tices, or even develop some management systems to design and produce the products so as
to meet customers’ needs and expectations showcasing good quality and lower costs. But the

©©2016
2017 The
The Author(s).
Author(s). Licensee
Licensee InTech.
InTech. This
This chapter
chapter is distributed
is distributed under
under thethe terms
terms of the
of the Creative
Creative Commons
Commons
Attribution
Attribution License
License (http://creativecommons.org/licenses/by/3.0),
(http://creativecommons.org/licenses/by/3.0), which
which permits
permits unrestricted
unrestricted use,use,
distribution,
distribution,
and andinreproduction
reproduction any medium,inprovided
any medium, provided
the original worktheisoriginal
properlywork is properly cited.
cited.
4 Quality Control and Assurance - An Ancient Greek Term Re-Mastered

management practices or systems adopted by the industries are always changed due to the
changes of the quality concepts as time goes by. This occurs as several quality gurus give
the pragmatic definitions of “quality” over different time periods, thus causing industries to
implement different practices or systems to control overall product quality [2].
In the first three decades of the last century, quality was defined as “conforming to the stan‐
dards and specifications of a product” [3]. Thus, the commonly adopted quality practices
by industries were the standardization of quality, inspection, and rework. Deming empha‐
sized that “quality is to fulfill the requirements of customers and satisfy them” [4]. Hence, the
meaning of quality was gradually changed to a “customer‐focused” perspective. Enterprises,
therefore, committed themselves to satisfy customers’ needs and expectations. Their aim was
to pursue customer's satisfaction and loyalty [5, 6]. Companies also developed a number of
methods to find out customers’ needs and expectations. To this end, in‐depth interviews with
customers were performed, customer surveys conducted, and market research was done.
But, when Apple announced several innovative products, and their sales were increasing,
it became apparent that only satisfying customers’ requirements are not enough [7]. As a
matter thereof the identification and fulfillment of customers’ unsatisfied latent needs was
gauged in conjunction with their emotional responses [8].
Entering the new century, several studies have suggested that merely satisfying customers
is not enough to ensure their loyalty [9–11]. The industries need to focus on the customer's
emotional responses and provide the products with attractive quality in order to pursue cus‐
tomers’ delight [11]. It is worth mentioning at this point that Apple is regarded as a future
trend setter, as it successfully created several innovative products such as iPod, iPhone, and
iPad, triggering increased sales. A strong customer service department equally assisted in
causing customers’ delight experiences [12].
In view of the above, quality concepts have changed. Terms such as “customer delight” are
deemed as forming the crucial elements of quality concepts, which are coined as “attractive
quality” and “innovative quality” [13]. The conceptualization of delight is that the emotion
of “delight” is composed of “joy” and “surprise,” which can be achieved as the customers’
latent requirements are satisfied. The provision of innovative quality products is the strategic
tool to meet the unsatisfied customers’ latent needs and their curiosity. These changes of
quality concepts will lead the enterprises to reengineer their existing quality system, in order
to develop the innovative quality attributes of products and services alike so as to retain and
attract customers. This scenario causes the quality professionals and researchers to further
develop and expand the new quality system beyond TQM. Based on performed research it is
the author's view that research should focus on developing an effective new quality system.
During the past century, several quality gurus had led the changes of quality concepts. This
chapter will discuss the changes of quality concepts during different time periods over the
past century. To this end, it will also state the reflected revolutions of quality management
systems with respect to the changing quality concepts. These are arranged in Sections 2
and 3, respectively. The development of “total quality management” (TQM) philosophy in
the 1980s was an important landmark, which caused the change of new quality concepts and
the reengineering of the quality management system, as introduced in Section 4. Based on
 The Evolution of Quality Concepts and the Related Quality Management 5
http://dx.doi.org/10.5772/67211

the performance evaluation of the TQM implementation of TQM, it is worth noting at this
point that the “business excellence model” had been proposed during the 1990s. This is elabo‐
rated in Section 5. This chapter also introduces the development of an integral model of a
business excellence system beyond TQM, based on the realization of TQM.

Section 6 expands on the changes of new quality concepts pertaining to “customer delight”
and “innovative quality” based on the investigation of customers’ latent needs in the new
century. This chapter includes a system, which may assist and cater for identifying and foster
upon customers’ undersatisfied latent needs and delights, enhancing innovative quality,
which is addressed in Section 7. The conclusion of this chapter is listed in the final section.

2. The early quality concepts and the reflected quality management system

Since the early twentieth century, manufacturing processes and activities initiated the con‐
trol practices to assure the product quality [14]. Manufacturing companies focused on the
related productivity and manufacturing costs. As such, the quality concept and control were
product‐focused.

2.1. The quality concept of “standard” and the “inspection” control

In 1913 Ford Motor Company, FMC, created the assembly line in their newly opened factory
in Highland Park, Michigan due to the influence of the scientific management of Frederick
W. Taylor. This resulted in Ford increasing its manufacturing volume [15]. Ford's assem‐
bly line was copied by many manufacturing companies. However, companies turned their
attention to control product‐related quality issues. Since manufacturers were more “prod‐
uct‐focused” in that time, the quality concept was, therefore, aimed at “conforming to the
standards and specifications of a product” [3]. This in turn, impelled quality engineers in
manufacturing industries to implement the method of “inspection” so as to control the quality
of a manufactured product.

Product designers and process engineers designed the standards and specifications of the
products, which were based on their critical attributes. They also set up the standards of the
manufacturing process and the standards of operations (SOPs). In doing so, the involved
workforce was requested to perform the tasks according to the developed SOPs. The quality
inspectors checked the dimensions and characteristics of products, detected the errors and
failures, and took the necessary actions to improve the product quality.

2.2. The development of process quality control

In order to ensure product quality, companies needed to utilize the “full inspection” method.
This was costly, since it required much time and labor efforts, and resulted in high internal
quality costs [16]. Walter Shewhart, thus, created the control chart, a quality technique tool
that he pioneered in Bell Laboratories working as a quality control engineer [17]. He proposed
the use of a sampling inspection method instead of a 100% inspection to reduce the overall
6 Quality Control and Assurance - An Ancient Greek Term Re-Mastered

amount of inspection. The control chart was utilized to monitor the quality performance con‐
cerning the critical aspects of a process, whereas the attributes of the product were identified
by means of sampling methods [18]. This enhanced overall effectiveness and also reduced the
associated costs.
Sampling inspection and control charts use many statistic tools such as probability theory,
the methods of random sample, analyses of sample mean and deviations to name but a few,
as means for improving quality levels. Hence, the method of quality control suggested by
Shewhart was called “statistical process control” (SPC) or “statistical quality control” (SQC).
Sampling inspection may not always ensure product quality, as it might cause fewer defective
products to be shipped to customers [19]. As a result, thereof, it leads to extra outside quality
costs. Shewhart, however, had argued that if the missed number of defects was small, then the
savings in inspection costs made it worthwhile [20].

3. The quality concepts and the reflected quality management system in

the mid‐twentieth century

More often than not, quality and the associated price of the goods are primary factors that are
considered by customers prior to them materializing a purchase [21]. As such, manufacturing
companies mainly emphasis on the control of quality and costs during the manufacturing
process, especially the ones that trigger poor quality.

3.1. The development of “quality costs”

In essence, Juran propounded the concept of “quality costs” in his book “Quality Control
Handbook” in 1951 [22]. Juran subdivided the quality costs into prevention, appraisal, internal
failure, and external failure costs. The performed literature review indicates that the losses
due to the production of defects and manufacturing failures are more than the costs of quality
control; in particular, the costs caused by internal and external failures. In view of the above,
the implementation of SPC could not effectively control the quality costs.

Despite this general classification being still widely used by practitioners and researchers, sev‐
eral authors had suggested other kinds of quality costs, especially the “invisible” or “hidden”
costs. The term hidden cost is used to indicate failure costs that are inadequately recorded in
company accounts and/or failure costs that are never actually discovered. Yang addressed
the hidden costs through the definition and addition of two new categories: “extra resultant
cost” and “estimated hidden cost” [16]. As such, the quality costs can be subdivided into the
following six categories:

‐ prevention costs
‐ appraisal costs
‐ internal failure costs
 The Evolution of Quality Concepts and the Related Quality Management 7
http://dx.doi.org/10.5772/67211

‐ external failure costs

‐ extra resultant costs and

‐ estimated hidden costs

Figure 1 depicts the new definition of quality costs.

Figure 1. Definition of categories of quality costs.

3.2. The quality concept “quality assurance” and the related TQC‐system

After Juran and several quality experts emphasized the quality cost issue, the concept of qual‐
ity costs was widely accepted by industry. Meanwhile, another quality concept appeared
gradually, namely “quality assurance.” However, a large number of experts in the area of
quality control, including Feigenbaum, asserted that implementing an SPC system on its own
could not effectively control quality costs [23]. It is worth mentioning that the concept of
“quality assurance” was “users‐oriented,” implying that “product possesses the fitness for
purpose of use based on its functions” and hence “quality is zero defects and meeting the
specifications 100%” [24].
8 Quality Control and Assurance - An Ancient Greek Term Re-Mastered

The performed literature review suggests that Feigenbaum emphasized that quality assur‐
ance could not be achieved by placing the control just on production processes. Thus, the
concept of total quality control, TQC, was introduced in 1959. TQC emphasizes that product
quality needs to be implemented at all stages of the product life cycle. The sequence of quality
activities is briefly shown as:

‐ product design,

‐ incoming quality approval,

‐ process quality control,

‐ product reliability,

‐ inventory,

‐ delivery, and

‐ customer service.

Actually, Feigenbaum's quality concept and ideas were similar to those described by Deming,
Juran, and Crosby [25].

The concepts and approaches of SPC, TQC, and “costs of quality” were introduced in Japan
during 1960 by Deming and Juran. The Union of Japanese Scientists and Engineers (JUSE),
which was formed in 1946, synthesized the concepts, principles, and approaches of statistical
process control and total quality control [26]. JUSE promoted the practices of TQC and the
quality concepts pursuing the zero defect culture and executing the task right first time.

4. The age of total quality management

While Japanese industries adopted the TQC practices, they emphasized the education and
training of quality for all employees and the cultivation of a quality culture. Therefore,
the implementation of TQC in Japanese industries was very different from the original
TQC.

4.1. The emerging of the Japanese company‐wide quality control, CWQC

Actually, the Japanese TQC possessed several critical characteristics listed as follows:

○ customer‐focused and quality‐first as the quality policies,

○ full participation and teamwork,

○ education and training of quality for all employees,

○ realization of “do the right thing first time,”

 The Evolution of Quality Concepts and the Related Quality Management 9
http://dx.doi.org/10.5772/67211

○ concept and materialization of a “zero defect” culture,

○ ”continuous improvement” as the key quality activity,

○ everyone is responsible for achieving high quality levels,

○ emphasizing on the prevention activities and quality assurance,

○ cultivating a quality culture environment.

Based on aforementioned critical characteristics, the Japanese TQC was acknowledged as

company‐wide quality control (CWQC).

The implication of CWQC in conjunction with Japanese industrial competitiveness and stra‐
tegic advantages facilitated their entrance into western markets. Japanese enterprises enjoyed
an increase in global market share by providing the customers with high‐quality products at
lower prices [27]. This in turn, resulted in western companies facing an increased amount of
competition from Japanese and other Asian manufacturers.

4.2. The development of total quality management

The Japanese competition caused American and western industries to implement bench‐
marking projections by studying Japanese CWQC performances. In doing so, they adopted
the principles of Japanese quality management. Based on the critical characteristics listed
above, western professionals further developed and refined CWQC to become a total quality
management (TQM) system. Its fundamental principles are listed as follows:

○ “customer‐focused” management,

○ “continuous improvement” as the key quality activity,

○ top management's promise persistence for pursuing quality,

○ full participation and teamwork,

○ education and training of quality for employees,

○ employees’ good quality concept,

○ quality leadership,

○ long‐term supplier relationship,

○ implementation of quality management system,

○ cultivation of quality culture.

It is the author's view that the TQM was well developed and suitable for western organiza‐
tions, as depicted in Figure 2. Thus, it was widely adopted by industries and nonprofit orga‐
nizations around the world.
10 Quality Control and Assurance - An Ancient Greek Term Re-Mastered

Figure 2. The framework of TQM.

The development of TQM was also influenced by the western quality experts, namely
Deming, Juran, and Crosby [28]. As already stated Deming's quality concept was that “qual‐
ity is to fulfill the requirements of customers and satisfy them” [4]. Crosby's definition of
quality was also similar, as he defined quality as “conformance to customers’ requirements.”
Juran also defined quality as being “fitness for purpose of use, …, it is judged by the users,
not the manufacturers, or the merchants” [22]. TQM was thus an integrated model of man‐
agement philosophies, quality concepts, and a set of practices, which were also influenced by
Deming's 14 points and Juran's quality trilogy. However, to implement the TQM successfully
it is necessary to integrate the so‐called “hard side” elements (that is, statistical methods,
quality control tools, process standardization, and improvement, etc.) with the “soft side”
aspects (that is, quality concept, employees’ participation, education and training, and quality
culture, etc.) [29].
From the mid‐1980s onward, several important quality programs were being launched.
Besides the development of TQM, the ISO 9000 system and the Six‐Sigma program
(which was initiated by Motorola) commenced in 1987. It is worth noting that up to
date, the ISO system has had four revisions in 1994, 2000, 2008, and 2015, respectively.
 The Evolution of Quality Concepts and the Related Quality Management 11
http://dx.doi.org/10.5772/67211

The Six‐Sigma quality scheme was being widely imitated by GE in 1995 [30]. The successful
implementation of Six‐Sigma by Motorola, GE, and several other multinational companies
caused the Six‐Sigma philosophy to be globally adopted by a number of industries and
organizations [31].

5. From Malcolm Baldrige National Quality Award to the Business

Excellence Model

From the late 1990s to present, the traditional quality concept has seen a number of changes. In
the United States of America, the Department of Commerce introduced in 1987 the Malcolm
Baldrige National Quality Award (MBNQA) by benchmarking the Japanese Deming Award
[32] to promote the implementation of TQM in industries and nonprofit organizations.

5.1. The national quality award and TQM

The main aim of TQM implementation is to achieve customers’ satisfaction [33]. This is turn
results in a company improving its financial performances [34–36]. The benefits may be
seen in areas such as cost reduction, increased market share and profit, and enhanced busi‐
ness competitiveness [37]. As a result, MBNQA specifically emphasizes business excellence.
Besides the implementation of TQM, MBNQA also considers the strategic management, and
information management and analyses.

The European Foundation for Quality Management (EFQA) also launched in 1992 a European
Quality Award (EQA) [38]. Based on the performed research, more than 80 countries have
established National Quality Awards (NQAs). These NQAs are largely based on the MBNQA,
EQA, and the Deming Prize [39, 40], and are generally considered to be an effective way of
pursuing business excellence, including customer loyalty and better long‐term financial per‐
formances. Most of these national quality awards may form part of the TQM system namely,
strategic management, performance evaluation, human resource management, and even IT
system and innovation.

5.2. Prospects of the business excellence model beyond TQM

The framework of the National Quality Award is indeed beyond the extent of TQM. In most
of the cases, National Quality Award such as MBNQA and EQA are acknowledged as a busi‐
ness excellence model, with the industries adopting it as their strategic business system. Yang
[41] proposed a framework of an integral model of a business‐excellence system based on the
integration of TQM, MBNQA, and EQA, and its islands:

‐ strategic management system,

‐ performance evaluation, and
‐ innovation (Figure 3).
12 Quality Control and Assurance - An Ancient Greek Term Re-Mastered

Figure 3. The framework of the proposed integral model of a business‐excellence system.

Meanwhile, the concept of “sustainable development” was also widely adopted in industry
[42, 43]. Zairi asserted that “sustainable development is based on a perceived need to address
environmental deterioration and to maintain the vital functions of natural systems for the
well‐being of present and future generations” [44]. He thus, proposed an integrated model
that incorporates the sustainable development into a TQM system. Yang et al. developed a
framework of the system of environmental management, which constitutes of 30 activity
items themselves belonging to 12 initiatives [45].

6. The concepts of “customer delight” and “innovative quality” in the

new century

A critical strategy of pursuing business excellence is to raise customers’ loyalty, which cannot
be assured by grossly satisfying customers. Indeed, even satisfied customers would defect at
 The Evolution of Quality Concepts and the Related Quality Management 13
http://dx.doi.org/10.5772/67211

a significant rate in many industries. It is recognized that customers’ satisfaction is the result
of the fulfillment of their explicit needs. As such, satisfaction only of their needs does not
directly result in customer loyalty, since the competitors would also fulfill these explicit needs
with better customer‐valued products [46].
Several studies have revealed that the degree of loyalty depends on whether the customers
are “totally satisfied” or merely “satisfied” [47, 48]. The totally satisfied customers are actu‐
ally about five times more likely to repurchase a product or service than those who are merely
“satisfied” [49, 50]. This suggests that enterprises must strive for “total customer satisfaction,”
or even “customer's delight” [51].
“Customer delight” is a new quality concept. A conceptualization of “delight” is the custom‐
er's emotional response, which is composed of “joy” and “surprise”—both encountered in the
providing process of goods/services [52]. In order to delight customers, the enterprises need
to provide the goods/services with attractive and innovative quality incentives. The strategic
actions are to identify customers’ latent needs and to create customer value by developing the
innovative products and attractive services in order to fulfill these.
If a company brings out some innovative products that consumers did not know they needed
before, then these innovative products will often spark high demand [53]. Indeed, Moore
illustrated eight types of innovations, namely [54]:

‐ application innovation,

‐ product innovation,

‐ process innovation,

‐ experience innovation,

‐ marketing innovation,

‐ business model innovation,

‐ structural innovation, and

‐ disruptive innovation.

These kinds of innovations, especially the first four types, will result in significant effects on
the fulfilment of the customers’ latent needs and their delight experiences.

7. The development of the innovation system

In order to raise the customers’ loyalty, the enterprises should develop the core capabilities
with an innovation system. In view of the above, the prerequisite for developing such a sys‐
tem is been described. As such, this chapter proposes a systematic innovation development
system based on the product/service value chain.
14 Quality Control and Assurance - An Ancient Greek Term Re-Mastered

7.1. The framework of the innovation system

At first, the differences among improvement, reengineering, and innovation are established
as shown in Figure 4. Improvement is implemented on the existing processes, as some prob‐
lems may have been encountered during the manufacturing process or the service delivery
process. Continuous improvement is the key activity of the TQM system, its aim is to improve
the quality of products/services and all the observed and or experienced bottlenecks on the
processes. The final objective is to raise customer satisfaction [55].

Figure 4. The framework of the innovation system.

Hammer and Champy asserted that improving solely the production system or service deliv‐
ery processes may not result in significant business performance [56]. Sometimes it is needed
to reengineer the critical processes, or to redevelop the provision systems based on customer
voices. The latter applies in particular to key customer values which are difficult to fulfill by
adopting the improvement actions, as shown in Figure 4. Thus, the aim of reengineering is to
create customers’ values, which are the critical factors of raising customer loyalty. Besides, reen‐
gineering also reaps the benefits including shorter delivery times of products/services (includ‐
ing lead time and production time), reduction of costs, and the effective utilization of resources.
Most companies develop and implement enterprise resources planning (ERP), customer rela‐
tionship management (CRM), and supply chain management (SCM) simultaneously [57].
By integrating these systems, enterprises can exert excellent business’ performance and
customer's loyalty. In order to effectively utilize these networks and their integrated systems,
it is the author's view that companies should proceed with the necessary processes of reengi‐
neering. This in turn, may have an impact on the critical functional activities on a timely basis.
 The Evolution of Quality Concepts and the Related Quality Management 15
http://dx.doi.org/10.5772/67211

The utilization of high‐tech functions and the rapid application of the internet resulted in the
change of customers’ purchasing behavior [58, 59]. Customers now focus not only on the eval‐
uations of price and functions; rather they also integrate quality with the perceived value [60].
It is the author's view that business systems ought to change and pursue innovation, speed,
and quality if they want to satisfy the overall needs of customers and create new value.
Customer satisfaction may be termed as fulfilling their requirements and expectations. This,
however, is not enough for delighting them and raising their loyalty. Performed research indi‐
cates that a number of customer's latent needs are never discovered and satisfied by enterprises
[61]. Thus, the latter's competitive force is to probe the unmet customers’ latent needs. There are
some new methodologies proposed by several researchers to pinpoint customers’ latent needs
[62]. Once the latter are identified, companies ought to overcome bottlenecks and aim at develop‐
ing and providing innovative products/services to satisfy customers’ latent needs and curiosity.
Eventually the customer will be set at the center of innovation. Thomke and von Hippel
asserted that “tapping into customer innovation can certainly generate tremendous value, but
capturing customer value is hardly a simple or straightforward work” [63]. The term “innova‐
tion” is usually considered as a process or a capability to create new ideas, and then develop
the innovative products/services in order to meet customers’ unsatisfied latent needs [64, 65].
In essence, the realization of “innovation” depends on the implementation of an innovation
system, as shown in Figure 4. This innovation system starts at the “mind” mining of the cus‐
tomer's latent needs and ends in the customer's value and response, and vice versa.

7.2. The transfer loop of innovation system

In order to effectively implement the innovation system, a transfer loop of the innovation
system has been developed, as shown in Figure 5. It constitutes of four constructs:

Figure 5. The transfer loop of the innovation system.

16 Quality Control and Assurance - An Ancient Greek Term Re-Mastered

‐ technology innovation,
‐ innovative products,
‐ customer value, and
‐ product functions.

It is worth mentioning that each construct contains several items. As such, the construct “tech‐
nology innovation” is termed as the fundamental force of innovation, which contains the
following items:

‐ technology development,
‐ development of new material,
‐ product content, and
‐ innovation process.
These are driven by the following core activities:

‐ insight,
‐ creativity,
‐ core capability,
‐ professional knowledge,
‐ experience share,
‐ resource inputs, and
‐ cooperation.
The effective implementation of “technology innovation” can create the “innovative prod‐
ucts,” which includes the following:

‐ integrated multifunctions,
‐ curiosity satisfaction,
‐ easy to use, and
‐ good quality at an affordable price.
Each of the other three constructs also contains several items. These constructs and their
involving items are shown in Figure 5.
The features of “innovative products” will satisfy the “customer value” which is accentuated
by good quality, delight, good experience, and extra value‐added features. In order for the
companies to fulfill these characteristics, it is hereby suggested to use “mind mining” methods
 The Evolution of Quality Concepts and the Related Quality Management 17
http://dx.doi.org/10.5772/67211

to identify customers’ unsatisfied and latent needs. They also ought to use methods and means
to eliminate the inconvenient utilization, and to integrate product functions and quality. These
findings and results may be hereby included into the quality functions. For realizing these
quality functions, the drivers are the capability of “technology innovation.” As such, the four
constructs form a “transfer loop of the innovation system,” as shown in Figure 5.

8. Conclusion

In a highly globalized economy, it is widely recognized that “innovation” has become the
key force for achieving business excellence, which in turn reflects as competitive advantages,
growth, and development [66]. Only the pursuit of product quality and service quality is not
enough to achieve the business objectives. The enterprises should alter their quality concepts
from the narrow definition of quality to include customer value and innovation. In order
to realize the innovation performance, this study has proposed a framework of the innova‐
tion system and the related transfer loop of the system. However, the proposed system is a
conceptual model, empirical studies ought to be conducted to identify potential causalities
among the critical constructs and their practices.

Author details

Ching‐Chow Yang

Address all correspondence to: [email protected]

Department of Industrial and Systems Engineering, Chung Yuan Christian University,

Taiwan, Republic of China

References

[1] Ulwick, Anthony W. What Customers Want. 2005; New York: McGraw‐Hill Inc.

[2] Yang, C.‐C. The Integration of TQM and Six‐Sigma. In the book “Total Quality Management
and Six Sigma”, edited by Tauseef Aized, ISBN 978‐953‐51‐0688‐3, InTech Ltd, August 8,
2012; 219–246.
[3] Edvard, C. D. The meaning of quality. Quality Progress. 1968; 1(10), 36–39.
[4] Deming, W. E. Out of Crisis. 1986; Cambridge, MA: MIT Press.
[5] Gorst, J., Kanji, G., & Wallage, W. Providing customer satisfaction. Total Quality Management,
1998; 9(4–5), 100–103.
[6] Sirohi, N., McLaughlin, E.W., & Wittink, D. R. A model of customer perception and store
loyalty intentions for a supermarket retailer. Journal of Retailing, 1998; 74(2), 223–245.
18 Quality Control and Assurance - An Ancient Greek Term Re-Mastered

[7] Teece, D. J. Business model, business strategy and innovation. Long Range Planning, 2010;
43, 172–194.
[8] Rindova, V. P., & Petkova, A. P. When is a new thing a good thing? Technological change,
product form design, and perceptions of value for product innovations. Organization
Science, 2007; 18(2), 217–232.

[9] Reichheld, F. F. Loyalty and renaissance of marketing. Marketing Management, 1994; 2(4),
10–21.

[10] Schneider, B., & Bowen, D. E. Understanding customer delight and outrage. Sloan
Management Review, 1999; 41(1), 35–45.

[11] Kumar, A., Olshavsky, R. W., & King, M. F. Exploring alternative antecedents of customer
delight. Journal of Customer Satisfaction, Dissatisfaction and Complaining Behaviour, 2001; 14,
14–26.
[12] Gallo, C. The Apple Experience. 2012; New York: McGraw‐Hill Inc.

[13] Yang, C.‐C. The identification of customer delight for quality attributes and its applica‐
tions. Total Quality Management & Business Excellence, 2011; 22(1–2), 83–98.

[14] Rao, A., Carr, L. P., Dambolena, I., Kopp, R. J., Martin, J., Rafii, F., & Schlesinger, P.
F. Total Quality Management: A Cross Functional Perspective. 1996; New York: John Wiley
& Sons.
[15] Zokaei, K., & Simons, D. Performance improvements through implementation of lean
practices: A study of the U.K. Red Meat Industry. International Food and Agribusiness
Management Review, 2006; 9(2), 30–53.

[16] Yang, C.‐C. Improving the definition and quantification of quality costs. Total Quality
Management & Business Excellence, 2008; 19(3–4), 175–191.

[17] Mitra A. Fundamentals of Quality Control and Improvement Second edition. 1998; London:
Prentice‐Hall International (UK) Limited.
[18] Xie, M., Goh, T. N., & Ranjan, P. Some effective control chart procedures for reliability
monitoring. Reliability Engineering & System Safety, 2002; 77(2), 143–150.
[19] Lavin, M. Inspection efficiency and sampling inspection plans. Journal of the American
Statistical Association, 1946; 41(236), 432–438.
[20] Giakatis, G., Enkawa, T. & Washitani, K. Hidden quality costs and the distinction
between quality cost and quality loss, Total Quality Management, 2001; 12(2), 179–190.
[21] Oakland, J. S. Total Quality Management. 2nd ed. 2000; Jordan Hill, Oxford: Butter‐
worth‐Heinemann.
[22] Juran, J. M. (1974).Quality Control Handbook. 3rd ed. New York: McGraw‐Hill.

[23] Feigenbaum, A. V. Total Quality Control. Harvard Business Review, 1956; 34 (6), 93–101.
 The Evolution of Quality Concepts and the Related Quality Management 19
http://dx.doi.org/10.5772/67211

[24] Crosby, P. Quality is Free. 1979; New York: McGraw‐Hill.

[25] Dotchin, J. A., & Oakland, J. S. Theories and concepts in total quality management.
Total Quality Management, 1992; 3(2), 133–145.

[26] Powell, T. C. Total quality management as competitive advantage: A review and empiri‐
cal study. Strategic Management Journal, 1995; 16, 15–37.

[27] Elshennawy, A. K., Maytubby, V. J., & Aly, N. A. Concepts and attributes of total quality
management. Total Quality Management, 1991; 2(1), 75–97.

[28] Yang, C.‐C. An integrated model of TQM and Six‐Sigma. International Journal of Six Sigma
and Competitive Advantage, 2004; 1(1), 97–111.

[29] Sila, I., & Ebrahimpour, M. An investigation of the total quality management survey
based on research published between 1989 and 2000. Journal of Quality and Reliability
International, 2002; 19(6–7), 902–970.
[30] Pande, P. S., Neuman R. P., & Cavanach R. R. The Six Sigma Way. 2000; New York:
McGraw‐Hill.
[31] Antony, J., & Banuelas, R. Key ingredients for the effective implementation of Six Sigma
program, Measuring Business Excellence, 2002; 6(4), 20–27.
[32] Bell, R. & Keys, B. A conversation with Curt W. Reimann on the background and future
of the Baldrige award. Organizational Dynamics, 1998; 26(4), 51–61.
[33] Chin, K. S., Pun, K. F., & Hua, H. M. Consolidation of China's quality transformation
efforts: A review. International Journal of Quality and Reliability Management, 2001; 18(8),
836–853.

[34] Hendricks, K. B., & Singhal, V. R. Quality awards and the market value of the firms:
an empirical investigation. Management Science, 1996; 42(3), 415–436.

[35] Gunasekaran, A. Enablers of total quality management implementation on manufactur‐

ing: A case study. Total Quality Management, 1999; 10(7), 987–996.

[36] Hansson, J., & Eriksson, H. The Impact of TQM on financial performance, Measuring
Business Excellence, 2002; 6(4), 44–54.

[37] Youssef, M. A., Boyd, J., & Williams, E. The impact of total quality management on firms
responsiveness: An empirical analysis. Total Quality Management, 1996; 7(1), 127–144.

[38] EFQM. The European Model for Total Quality Management, 1992; Brussels: European
Foundation for Quality Management.

[39] Tan, K. C., Wong, M. F., Mehta, T., & Khoo, H. H. Factors affecting the development of
national quality awards. Measuring Business Excellence, 2003; 7(3), 37–45.

[40] Cauchick Miguel, P. A., Morini, C., & Pires, S. R. I. An application case of the Brazilian
National Quality Award. The TQM Magazine, 2004; 16(3), 186–193.
20 Quality Control and Assurance - An Ancient Greek Term Re-Mastered

[41] Yang, C.‐C. Development of an integrated model of a business excellence system. Total
Quality Management & Business Excellence, 2009; 20(9), 931–944.

[42] Kanji, G. K. Architecture of business excellence in the public and service sectors. Total
Quality Management and Business Excellence, 2008; 19(3–4), 399–415.

[43] Okumura, S., Morikuni, T., & Okino, N. Environmental effects of physical life span of a
reusable unit following and physical failures in a remanufacturing system. International
Journal of Production Research, 2003; 43(16), 3667–3687.

[44] Zairi, M. Beyond TQM implementation: the new paradigm of TQM sustainability. Total
Quality Management & Business Excellence, 2002; 13(8), 1161–1172.

[45] Yang, C.‐C. Exploration strategies and key activities for the system of environmental
management. Total Quality Management & Business Excellence, 2011; 22(11), 1179–1194.

[46] Matzler, K., & Hinterhuber, H. H. How to make product development projects more
successful by integrating Kano's model of customer satisfaction into quality function
development. Technovation, 1998; 18(1), 25–38.

[47] Finkelman, D. P., & Goland, A. R. How not to satisfy your customers. The McKinsey
Quarterly, 1990; 26(4), 2–12.

[48] Heskett, J. L., Jones, T.O., Loveman, G.W., Sasser, W. E., & Schlesinger, L.A. Putting the
service‐profit chain to work. Harvard Business Review, 1994; 72(2), 164–174.

[49] Jones, T. O., & Sasser Jr., W. E. Why satisfied customers defect. Harvard Business Review,
1995; 73(6), 88–99.

[50] Johnson, R., Retail isn't broken Stores are. Harvard Business Review, 2011; 89(12), 78–82.

[51] Johann, F., & Kurt, M. Customer delight and market segmentation: An application of
three‐factor theory of customer satisfaction on lift style groups. Tourism Management,
2008; 29(1), 116–126.
[52] Torres, E. N., & Shery, k. From customer satisfaction to customer delight: Creating a new
standard of service for the hotel industry. International Journal of Contemporary Hospitality
Management, 2013; 25(5), 642–659.

[53] Rigby, D. K., Gruver, K., & Allen, J. Innovation in turbulent times, Harvard Business
Review, 2009; 87(6), 79–86.

[54] Moore, G. A., Innovating within established enterprises. Harvard Business Review, 2004;
82(7–8), 87–92.

[55] Yang, C.‐C., The establishment of a TQM system for the health care industry. The TQM
Magazine, 2003; 15(2), 93–98.

[56] Hammer, M., & Champy, J. Reengineering the Corporation. 1993; New York: Harper Collins.
[57] Hendricks, K. B., Singhai, V. R. & Stratman, J. K. The impact of enterprise systems on cor‐
porate performance: A study of ERP, SCM, and CRM system implementations. Journal of
Operations Management, 2007; 25(1), 65–82.
 The Evolution of Quality Concepts and the Related Quality Management 21
http://dx.doi.org/10.5772/67211

[58] Bill, G. Business @ the Speed of Thought: Using a Digital Nervous System. 1999; New York:
Warner Books, Inc.
[59] Chuck, M. Get Future. 1999; New York: McGraw‐Hill, Inc.

[60] Feigenbaum, A. V. The new quality for the twenty‐first century. The TQM Magazine,
1999; 11(6), 376–383.

[61] Ulwick, A. W. Turn customer input into innovation. Harvard Business Review, 2002; 80(1),
91–97.

[62] Yang, C.‐C. An analytical methodology for identifying the latent needs of customers.
Total Quality Management & Business Excellence, 2013; 24(11–12), 1332–1346.

[63] Thomke, S., & von Hippel, E. Customers as Innovators: A new way to create value.
Harvard Business Review, 2002; 80(4), 74–81.

[64] Hurley, R. F., & Hult, G. T. M. Innovation, market orientation and organizational learn‐
ing: an integration and empirical examination. Journal of Marketing, 1998; 62(3), 42–54.

[65] Hult, G. T. M., Hurley, R. F., & Knight, G. A., Innovativeness: Its antecedents and impact
on business performance. Industrial Marketing Management, 2004; 33, 429–438.

[66] Sohel‐Uz‐Zaman, A. S. M. D., & Anjalin, U. Evolution of service: Importance, com‐

petitiveness and sustainability in the new circumstances. Journal of Service Science and
Management, 2011; 4, 253–260.