Scribd Logo
Upload

Welcome to Scribd!

  • 476 views

    Siga Led Rev2 PDF

    Uploaded by

    mohammad
    The SIGA-LED is a remote LED alarm indicator that provides visual indication of an alarm condition when used with compatible SIGA Series detectors. It uses a clear lens and red LED that pulses on and off during an alarm. It can only be used with the SIGA-SB or SIGA-SB4 standard detector bases and has a maximum operating range of 1,567 feet when used with 18 AWG wire.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Siga Led Rev2 PDF

    Uploaded by

    mohammad
    476 views1 page
    The SIGA-LED is a remote LED alarm indicator that provides visual indication of an alarm condition when used with compatible SIGA Series detectors. It uses a clear lens and red LED that pulses on and off during an alarm. It can only be used with the SIGA-SB or SIGA-SB4 standard detector bases and has a maximum operating range of 1,567 feet when used with 18 AWG wire.

    Original Title

    SIGA LED REV2.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The SIGA-LED is a remote LED alarm indicator that provides visual indication of an alarm condition when used with compatible SIGA Series detectors. It uses a clear lens and red LED that pulses on and off during an alarm. It can only be used with the SIGA-SB or SIGA-SB4 standard detector bases and has a maximum operating range of 1,567 feet when used with 18 AWG wire.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    476 views1 page

    Siga Led Rev2 PDF

    Uploaded by

    mohammad
    The SIGA-LED is a remote LED alarm indicator that provides visual indication of an alarm condition when used with compatible SIGA Series detectors. It uses a clear lens and red LED that pulses on and off during an alarm. It can only be used with the SIGA-SB or SIGA-SB4 standard detector bases and has a maximum operating range of 1,567 feet when used with 18 AWG wire.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Product Information Specifications

    DESCRIPTION LED Type Clear Lens,


    The Remote LED Alarm Indicator, Model SIGA-LED, is a Red Light Emitting Diode
    component of the Signature Series System. This polarized Luminous Intensity 65 mcd
    device provides visual indication when a detector initiates an Operation Pulses on Alarm Condition
    alarm. A clear lens, light emitting diode pulses on and off in the Resistance per Wire 10W Max.
    event of an alarm condition. Operating Temperature Range 32 - 120°F (0 - 49°C)
    Operating Humidity Range 0 - 93% RH
    The SIGA-LED can ONLY be used with the Standard Detector
    Base, Model SIGA-SB or SIGA-SB4. It is NOT compatible with Storage Temperature Range -4 - 140°F (-20 - 60°C)
    any other bases. Compatible Detectors SIGA Series Detectors
    Compatible Bases Standard Bases: SIGA-SB, -SB4
    NOTE: -Not for use with 24V DC circuits.
    Duct Applications
    WARNINGS Duct Detector Mounting Plate, SIGA-DH
    Compatible Electrical Boxes
    1) This remote annunciator is NOT intended to be used as an North American 1-Gang Box
    evacuation signal for Life Safety situations. Standard 4" Square Box 1-1/2" (38 mm) Deep w/ 1-Gang Cover

    2) This remote annunciator will NOT operate if the device that Wire Size Max. Wire Distance
    2
    it is connected to it is not powered. #18 AWG (0.75 mm )* 1,567 ft. (478 m)
    2
    #16 AWG (1.0 mm )* 2,490 ft. (759 m)
    3) The LED used in this device has a 180° range of visibility,
    2
    but the best visibility is achieved in direct viewing #14 AWG (1.5 mm )* 3,960 ft. (1,207 m)
    applications. This device should NOT be installed in areas
    * Preferred wire size.
    of direct sunlight, or where its intensity may be reduced.
    Construction & Finish High Impact
    Engineering Polymer, White
    Installation Instructions Shipping Weight 3.2 oz (90 g)

    1) Refer to Technical Bulletin (P/N 270145) for installation


    guidelines.

    2) Wire the SIGA-LED to the base as described in the


    Installation Sheet supplied with the base. Be sure to
    observe the polarity of the terminals on the terminal block
    as shown in the diagram below. Remote LED Alarm Indicator, SIGA-LED

    SIGA-LED
    REMOTE LED ALARM INDICATOR

    PART NO.: 387025P ISSUE: 5

    EDWARDS SYSTEMS TECHNOLOGY


    SARASOTA , FL 800-655-4497 Fax. 941-753-1806
    CHESHIRE, CT 203-699-3000 Fax. 203-699-3075
    OWEN SOUND, CANADA 519-376-2430 Fax. 519-376-7258
    INTERNATIONAL: CANADA 905-678-6767 Fax. 905-678-9791

    You might also like