Scribd Logo
Upload

Welcome to Scribd!

  • 376 views

    Sizing of Sewage Treatment Plant

    Uploaded by

    Aldin
    This document provides sizing calculations for various components of a sewage treatment plant. The design data shows an average daily flow of 0 cubic meters and a BOD of 250 mg/L. The sizing calculations then determine that most tank volumes and equipment capacities are 0 cubic meters/day or 0 gallons per minute due to the lack of wastewater flow. Recommendations are made to adopt multiple units of various pumps and equipment with approximate capacities of 0 gpm and horsepowers of 2.5 HP or 5 HP.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Sizing of Sewage Treatment Plant

    Uploaded by

    Aldin
    376 views13 pages
    This document provides sizing calculations for various components of a sewage treatment plant. The design data shows an average daily flow of 0 cubic meters and a BOD of 250 mg/L. The sizing calculations then determine that most tank volumes and equipment capacities are 0 cubic meters/day or 0 gallons per minute due to the lack of wastewater flow. Recommendations are made to adopt multiple units of various pumps and equipment with approximate capacities of 0 gpm and horsepowers of 2.5 HP or 5 HP.

    Original Description:

    Estimate for stp

    Original Title

    STP

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides sizing calculations for various components of a sewage treatment plant. The design data shows an average daily flow of 0 cubic meters and a BOD of 250 mg/L. The sizing calculations then determine that most tank volumes and equipment capacities are 0 cubic meters/day or 0 gallons per minute due to the lack of wastewater flow. Recommendations are made to adopt multiple units of various pumps and equipment with approximate capacities of 0 gpm and horsepowers of 2.5 HP or 5 HP.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    376 views13 pages

    Sizing of Sewage Treatment Plant

    Uploaded by

    Aldin
    This document provides sizing calculations for various components of a sewage treatment plant. The design data shows an average daily flow of 0 cubic meters and a BOD of 250 mg/L. The sizing calculations then determine that most tank volumes and equipment capacities are 0 cubic meters/day or 0 gallons per minute due to the lack of wastewater flow. Recommendations are made to adopt multiple units of various pumps and equipment with approximate capacities of 0 gpm and horsepowers of 2.5 HP or 5 HP.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 13

    Project :

    Subject : Designed By :
    SIZING OF SEWAGE TREATMENT PLANT
    Date :

    I. SIZING OF SEWAGE TREATMENT PLANT

    A. DESIGN DATA:

    OCCUPANCY DOMESTIC AVERAGE FLOW = 0


    0

    WASTEWATER GENERATED = 0
    0

    B. DESIGN CRITERIA

    BOD = 250
    LOAD = 0.56
    AERATION REQUIREMENTS = 93
    PEAK DETENTION FLOW RATE = 6
    SLUDGE GROWTH RATE = 60
    SLUDGE DESTRUCTION = 50
    SLUDGE CONCENTRATION = 2
    DETENTION TIME (HOLDING) = 9
    CHLORINE DOSAGE = 7

    BOD TOTAL:
    = wastewater generated x BOD

    ( 0 cu.m. / day) 250 mg/L) 1000 L / cu.m. )

    = 0 kg/day

    C. SIZING OF STP TANKS AND REQUIREMENTS:

    1.) RAW SEWAGE

    Inlet = standard
    length = 2 m.
    width = 1 m.
    depth = 4.2 m.

    2.) HOLDING / COLLECTING TANK


    peak load = 0 cu.m. / day
    duration = 6 hours
    volume = 0 cu.m. / day) (1 day/ 24 hours) (6 hours)
    = 0 cu.m.
    length = 0 m.
    width = 0 m.
    depth = 4.2 m.

    A. SEWAGE PUMP DIFFUSER


    Detention = 6 hours
    Capacity = 0 cu.m / 6 hours
    = 0 cu.m. / hr) ( 264.2 gals/cu.m)
    = 0 gpm 0 gpm )
    TDH = 30 ft
    BHP = 0 gpm vs. 30 ft., TDH /
    = 0 HP 2.5 HP )

    B. RECOMMENDATION:

    Adopt two (2) units of diffuser pump:


    Capacity / Unit : 0 gpm vs.
    Approx : 2.5 HP

    3.) COMMINUTOR (FINE SCREEN AREA)

    length = m
    width = m
    depth = 4.2 m

    A. COMMINUTOR GRINDER
    Capacity = 0 cu.m. / day(1 day / 6 hours)
    = 0 cu.m./hr
    Flow, Q = 0 cu.m./hr 264.2 gals/cu.m. ) ( 1 hr./ 60 min)
    = 0 gpm 0 gpm)
    TDH = 25 ft
    BHP = 0 gpm vs. 25 ft., TDH /
    = 0 HP 2.5 HP )

    B. RECOMMENDATION:

    Adopt two (2) units of comminutor grinder:


    Capacity / Unit : 0 gpm vs.
    Approx : 2.5 HP
    4.) RAW SEWAGE DISTRIBUTION BOX

    peak load = 0 cu.m. / day


    duration = 2 hours
    volume = 0 cu.m. / day) (1 day/ 24 hours) (6 hours)
    = 0 cu.m.
    length = 0 m.
    width = 0 m.
    depth = 4.2 m.

    A. RAW SEWAGE EJECTOR PUMP


    Detention = 2 hours
    Capacity = 0 cu.m / 2 hours
    = 0 cu.m. / hr) ( 264.2 gals/cu.m)
    = 0 gpm 0 gpm )
    TDH = 30 ft
    BHP = 0 gpm vs. 30 ft., TDH /
    = 0 HP 2.5 HP )

    B. RECOMMENDATION:

    Adopt two (2) units of raw sewage ejector pump:


    Capacity / Unit : 0 gpm vs.
    Approx : 2.5 HP

    5.) AERATION TANK

    BOD = 0 kg/day
    load = 0.56 kg/cu.m./day
    volume = 0 kg/day (0.56 kg/cu.m./day)
    = 0 / 2 tanks
    length = m
    width = m
    depth = 4.2 m

    A. BLOWER REQUIREMENT
    Aeration = 93 cu.m. Of air / kg BOD
    = 0 kg/day ( 93 cu.m. Of air/kg BOD )(1 day/24 hours)/
    = 0 cu.m./min
    Air lifts = 0 cu.m. /min 2
    0 cu.m,/min
    Capacity = 0 0 cu.m./min (264.2 gals/cu.m.)/ 3 units
    = 0 gpm 0 gpm )
    TDH = 50 ft.
    BHP = 0 gpm vs 50 ft., TDH /
    = 0 HP 5 HP )

    B. RECOMMENDATION:

    Adopt four (4) units of blower equipment:


    Capacity / Unit : 0 gpm vs.
    Approx : 5 HP

    6.) SETTLING / CLARIFIER TANK

    volume = 0 cu.m./day (1 day/24 hours) x (6 hours)


    = 0 cu.m.
    length = m
    width = m
    depth = 4.2 m

    A. CLARIFIER EJECTOR PUMPS


    Detention = 2 hours
    Capacity = 0 cu.m / 2 hours
    = 0 cu.m. / hr) ( 264.2 gals/cu.m)
    = 0 gpm 0 gpm )
    TDH = 30 ft
    BHP = 0 gpm vs. 30 ft., TDH /
    = 0 HP 2.5 HP )

    B. RECOMMENDATION:

    Adopt two (2) units of clarifier ejector pumps:


    Capacity / Unit : 0 gpm vs.
    Approx : 2.5 HP

    7.) SLUDGE DIGESTER TANK

    volume = 0 cu.m./day (1 day/24 hours) x (6 hours)


    = 0 cu.m.
    length = m
    width = m
    depth = 4.2 m

    A. SLUDGE SEWAGE EJECTOR PUMPS


    Detention = 2 hours
    Capacity = 0 cu.m / 2 hours
    = 0 cu.m. / hr) ( 264.2 gals/cu.m)
    = 0 gpm 0 gpm )
    TDH = 30 ft
    BHP = 0 gpm vs. 30 ft., TDH /
    = 0 HP 2.5 HP )

    B. RECOMMENDATION:

    Adopt two (2) units of sludge sewage ejector pumps:


    Capacity / Unit : 0 gpm vs.
    Approx : 2.5 HP

    8.) CHLORINATOR / CLEAR WATER PIT

    peak load = 0 cu.m. / day


    Detention = 2 hours
    Capacity = 0 cu.m. / day) (1 day/ 24 hours) (1.5 hours)
    Flow, Q = 0 cu.m. 2
    = 0 cu.m.
    length = 0 m.
    width = 0 m.
    depth = 4.2 m.

    A. CHLORINE EJECTOR PUMPS


    Chlorine F = 7 mg/L
    Weig = 0 cu.m./day (7 mg/L)(1,000 L/cu.m.)(1 kg/1,000,000
    = 0 kg/day

    If hypochlorite is use with 70% available chlorine:


    weight of hypochl 0 kg/day 0.7
    = 0 kg/day

    Chlorinator Capacity at 5% Solution:


    volu = 0 kg/day 1 L/ kg) /(0.05)
    = 0 L/day

    Adopt 0 to 100 L/day capacity of chlorinator clear water ejector pumps


    Detention = 1.5 hours
    Capacity = 0 cu.m. / day)/(1.5 hours)
    Flow, Q = 0 cu.m./hr ( 264.2 gals/cu.m.)( 1 hr/60 min)
    = 0 gpm 0 gpm )
    TDH = 40 ft
    BHP = 0 gpm vs. 40 ft., TDH /
    = 0 HP 2.5 HP )

    B. RECOMMENDATION:

    Adopt two (2) units of clear water ejector pumps:


    Capacity / Unit : 0 gpm vs.
    Approx : 2.5 HP

    II. LEGEND OF SEWAGE TREATMENT PLANT

    1.) RAW SEWAGE PIT

    length = m - 1
    width = m - 1
    depth = 4.2 m - 1

    2.) HOLDING / COLLECTING TANK

    length = m - 1
    width = m - 1
    depth = 4.2 m - 1

    3.) COMMINUTOR / SCREEN

    length = m - 1
    width = m - 1
    depth = 4.2 m - 1

    4.) RAW/SEWAGE DISTRIBUTION TANK

    length = m - 1
    width = m - 1
    depth = 4.2 m - 1

    5.) AERATION TANK

    length = m - 2
    width = m - 2
    depth = 4.2 m - 2

    6.) FINAL SETTLING TANK

    length = m - 1
    width = m - 1
    depth = 4.2 m - 1

    7.) SLUDGE DIGESTER TANK


    length = m - 1
    width = m - 1
    depth = 4.2 m - 1

    8.) CHLORINATOR AREA/CLEAR WATER PIT

    length = m - 1
    width = m - 1
    depth = 4.2 m - 1
    Checked By :
    Date :

    gpm
    cu.m.

    gpd
    cu.m.

    mg/L
    kg of BOD/cu.m./day
    cu.m. Of air/ kg of BOD
    hours
    %
    %
    %
    days
    mg/L

    1 kg / 10,000,000 mg)
    24 hours) (6 hours)

    1 hr / 60 min )

    3960 x 0.5 )

    30 ft., TDH

    gals/cu.m. ) ( 1 hr./ 60 min)

    3960 x 0.5 )

    25 ft., TDH
    24 hours) (6 hours)

    1 hr / 60 min )

    3960 x 0.5 )

    30 ft., TDH

    air/kg BOD )(1 day/24 hours)/60 min

    (264.2 gals/cu.m.)/ 3 units

    3960 x 0.5 )
    50 ft., TDH

    hours) x (6 hours)

    1 hr / 60 min )

    3960 x 0.5 )

    30 ft., TDH

    hours) x (6 hours)

    1 hr / 60 min )
    3960 x 0.5 )

    30 ft., TDH

    24 hours) (1.5 hours)

    1,000 L/cu.m.)(1 kg/1,000,000 mg)

    ter ejector pumps

    /cu.m.)( 1 hr/60 min)

    3960 x 0.5 )
    40 ft., TDH

    You might also like