Scribd
Upload
95 views1 page

Detailed Description of Error Code

This document provides a detailed description of error codes for an ATM machine. It lists various software error codes ranging from 1 to 899, along with possible causes and recommended actions to resolve each error code. For each code, it explains the status code description from the manufacturer, probable causes such as software issues, hardware errors, or poor connections, and recommended actions to fix the problem like restarting the machine, reinstalling software, or checking hardware drivers.

Uploaded by

egal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
95 views1 page

Detailed Description of Error Code

This document provides a detailed description of error codes for an ATM machine. It lists various software error codes ranging from 1 to 899, along with possible causes and recommended actions to resolve each error code. For each code, it explains the status code description from the manufacturer, probable causes such as software issues, hardware errors, or poor connections, and recommended actions to fix the problem like restarting the machine, reinstalling software, or checking hardware drivers.

Uploaded by

egal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DT Series ATM Error Code Description Manual

4. Detailed Description of Error Code

1.1 1-899 (Software error)


Status Probable Cause or Code from
Description
Code Recommended Action Manufacturer
2 System error, lack of memory Restart the machine or add virtual memory None
1. Remove virus
100 System virus None
1. Re-install system
1. Bad track in hard disk
2. Software file lost or setup error
101 Blue screen when start the system None
3. Industrial PC hardware error
4. Plug-in not in well contact
1. Bad track in hard disk
2. Software file lost or setup error
102 Error dialog pops up None
3. Industrial PC hardware error
4. Plug-in in poor connection
1. Software lost or damaged
2. Bad track in hard disk
3. Industrial PC hardware error
Hardware cannot be recognized by
103 4. The hardware driver program isn't None
the system.
installed or the driver program version
isn't wrong
5. Plug-in in poor connection
1. Software lost or damaged
2. Industrial PC hardware error
104 Other errors 3. Software setup or compatibility error None
4. Bad track in hard disk
5. Plug-in in poor connection
1. Software lost or damaged
105 ATMC error 2. Bad track in hard disk None
3. Software setup or compatibility error
1. Software lost or damaged
Device driver, SP, communication
106 2. Bad track in hard disk None
assembly or other program errors
3. Software setup or compatibility error
1. Software lost or damaged
107 Other software errors 2. Bad track in hard disk None
3. Software setup or compatibility error

Page 4 of 206

You might also like