Rotating Solar Inverter Project Using Microcontroller 50W
Rotating Solar Inverter Project Using Microcontroller 50W
50W
This system is mainly designed for charging 50-Watt Inverter using solar energy.
Due to the many benefits of using solar energy, many institutions are opting to
make use of solar energy. This system uses sun tracking solar panel which helps
to charge the inverter. The inverter is used in case of power cut. The inverter is
inverter gets charged. These types of solar panel ensure that maximum amount of
solar energy is captured into the panel by continuously keeping the panel surface
perpendicular to rays of the sun, in other words by facing towards the sun. This
MOSFET switch, DC inverter,12 V battery, 50W solar panel and charger. Solar
on the loads, the battery chargers the inverter and it gets converted from DC to
AC, then the setup transformer increases the voltage required to run the device.
MOSFET is a transistor which regulates the voltage and then it provides powers
to the load. Our system successfully powers the AC load using a sun tracking
solar panel.
Block Diagram:
Hardware Specifications
ATmega328P AVR MC
Solar Panel
LCD’s –
Crystal Oscillator –
Resistors –
Capacitors –
Transistors
PCB
LED’s
Transformer/Adapter
Push Button
Software Specifications
Arduino Compiler
MC Programming Language: C