Scribd Logo
Upload

Welcome to Scribd!

  • 26 views

    Page 10 of 174: For Column 21

    Uploaded by

    Gabriel Paolo Cañete
    This document summarizes punching shear checks for two columns. For column 1, the calculated punching shear force of 1586.55 kN is less than the minimum punching shear capacity of 1697.61 kN. For column 21, the calculated punching shear force of 791.87 kN is less than the minimum punching shear capacity of 1510.85 kN. Both columns pass the punching shear check. The document also includes a one-way shear diagram.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Page 10 of 174: For Column 21

    Uploaded by

    Gabriel Paolo Cañete
    26 views1 page
    This document summarizes punching shear checks for two columns. For column 1, the calculated punching shear force of 1586.55 kN is less than the minimum punching shear capacity of 1697.61 kN. For column 21, the calculated punching shear force of 791.87 kN is less than the minimum punching shear capacity of 1510.85 kN. Both columns pass the punching shear check. The document also includes a one-way shear diagram.

    Original Title

    2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes punching shear checks for two columns. For column 1, the calculated punching shear force of 1586.55 kN is less than the minimum punching shear capacity of 1697.61 kN. For column 21, the calculated punching shear force of 791.87 kN is less than the minimum punching shear capacity of 1510.85 kN. Both columns pass the punching shear check. The document also includes a one-way shear diagram.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    26 views1 page

    Page 10 of 174: For Column 21

    Uploaded by

    Gabriel Paolo Cañete
    This document summarizes punching shear checks for two columns. For column 1, the calculated punching shear force of 1586.55 kN is less than the minimum punching shear capacity of 1697.61 kN. For column 21, the calculated punching shear force of 791.87 kN is less than the minimum punching shear capacity of 1510.85 kN. Both columns pass the punching shear check. The document also includes a one-way shear diagram.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Total Footing Depth, Do = 0.

    50 m
    Calculated Effective Depth,d = 0.41 m

    For rectangular column, = : 1.22

    Considering the particular column as interior column,


    : 40.0
    Slab Edge Factor

    Effective depth, d, increased until 0.75*Vc Punching Shear Force

    Punchng Shear Force, Vu = 1586.55kN

    From ACI Cl. 22.6.5.2, for column = 3.64 m

    Table 22.6.5.2, (b), Vc1 = = 2983.67 kN

    Table 22.6.5.2, (c), Vc2 = = 3677.84 kN

    Table 22.6.5.2, (a), Vc3 = = 2263.48 kN

    Punching shear strength,Vc= 0.75 x minimum of (Vc1,Vc2,Vc3) = 1697.61 kN


    0.75 * Vc > Vu hence, OK

    For Column 21
    Critical Load case for Punching Shear Check : 1017
    Total Footing Depth, Do = 0.50 m
    Calculated Effective Depth,d = 0.41 m

    For rectangular column, = : 1.00

    Considering the particular column as interior column,


    : 40.0
    Slab Edge Factor

    Effective depth, d, increased until 0.75*Vc Punching Shear Force

    Punchng Shear Force, Vu = 791.87kN

    From ACI Cl. 22.6.5.2, for column = 3.24 m

    Table 22.6.5.2, (b), Vc1 = = 3021.70 kN

    Table 22.6.5.2, (c), Vc2 = = 3553.34 kN

    Table 22.6.5.2, (a), Vc3 = = 2014.47 kN

    Punching shear strength,Vc= 0.75 x minimum of (Vc1,Vc2,Vc3) = 1510.85 kN


    0.75 * Vc > Vu hence, OK

    ------------------------------------------------------

    One-Way Shear

    Shear Diagram

    150
    100
    50
    0
    -50
    -100
    -150
    -200
    -250
    -300
    -350
    -400
    -450
    -500
    -550
    -600
    -650
    -700
    -750
    -800
    -850
    0 0.9 1.8 2.7 3.6 4.5 5.1

    Position [m]

    Page 10 of 174

    You might also like