Scribd Logo
Upload

Welcome to Scribd!

  • 143 views

    03 Engine Specification Sheet - C9

    Uploaded by

    avinash_1229

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    03 Engine Specification Sheet - C9

    Uploaded by

    avinash_1229
    143 views5 pages

    Original Title

    03 Engine Specification Sheet_C9

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    143 views5 pages

    03 Engine Specification Sheet - C9

    Uploaded by

    avinash_1229

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    ®

    C9 ACERT™
    Industrial Power Unit
    Tier 3/Stage IIIA
    224 bkW/300 bhp @ 2200 rpm

    CATERPILLAR ENGINE
    SPECIFICATIONS
    I-6, 4-Stroke-Cycle Diesel
    Bore......................................................112.0 mm (4.41 in)
    Stroke...................................................149.0 mm (5.87 in)
    Displacement.......................................... 8.8 L (537.01 in3)
    Aspiration...............................Turbocharged Aftercooled
    Compression Ratio...................................................16.1:1
    Rotation (from flywheel end).............. Counterclockwise
    Cooling System............................. 13.9 liters, 3.7 gallons
    Lube Oil System (refill)................. 32.0 liters, 8.5 gallons
    Weight, Net Dry (approximate kg, lb)..... 776 kg, 1711 lb

    Image shown may not reflect


    actual engine

    FEATURES
    Emissions Full Range of Attachments
    Meets U.S. EPA Tier 3, EU Stage IIIA emission Wide range of bolt-on system expansion
    requirements. attachments, factory designed and tested.

    Worldwide Supplier Capability Unmatched Product Support Offered Through


    Caterpillar Worldwide Caterpillar Dealer Network
    - Casts engine blocks, heads, and cylinder liners More than 1,500 dealer outlets
    - Machines critical components Caterpillar factory-trained dealer technicians service
    - Assembles complete engine every aspect of your industrial engine
    - Factory-designed systems built at Caterpillar ISO 99.7% of parts orders filled within 24 hours
    9001:2000 certified facilities worldwide
    -Ownership of these manufacturing processes Caterpillar parts and labor warranty
    enables Caterpillar to produce high quality, Preventive maintenance agreements available for
    dependable product. repair before failure options

    Testing Scheduled Oil Sampling program matches your oil


    sample against Caterpillar set standards to
    Prototype testing on every model: determine:
    - proves computer design - internal engine component condition
    - verifies system torsional stability - presence of unwanted fluids
    - functionality tests every model - presence of combustion by-products
    Every Caterpillar engine is dynamometer tested
    under full load to ensure proper engine Web Site
    performance. For all your industrial power requirements, visit
    www.cat-industrial.com.

    13 January 2011 8:58 PM


    ®
    C9 ACERT™
    Industrial Power Unit
    Tier 3/Stage IIIA
    STANDARD ENGINE EQUIPMENT 224 bkW/300 bhp @ 2200 rpm

    Air Inlet System Fuel System


    Air to air aftercooled (ATAAC) HEUI injection
    Turbocharged Fuel filter, secondary (2 micron high performance)
    Fuel transfer pump
    Control System Fuel priming pump
    ACERT™ Technology
    Electronic governing, PTO speed control
    Programmable ratings
    Cold mode start strategy
    Automatic altitude compensation Lube System
    Power compensation for fuel temperature Crankcase breather
    Programmable low and high idle and total engine Oil cooler
    limit Oil filler
    Electronic diagnostics and fault logging Oil filter
    Engine monitoring system Oil pan front sump
    J1939 Broadcast (diagnostic and engine status) Oil dipstick
    ADEM™ A4 Oil pump (gear driven)

    Cooling System General


    Thermostats and housing, vertical outlet Paint, Caterpillar Yellow
    Jacket water pump, centrifugal Vibration damper
    Water pump, inlet Lifting eyes

    Exhaust System
    Exhaust manifold, dry
    Optional exhaust outlet

    Flywheels and Flywheel Housing


    SAE No. 1 Flywheel housing

    2 13 January 2011 8:58 PM


    ®
    C9 ACERT™
    Industrial Power Unit
    Tier 3/Stage IIIA
    PERFORMANCE CURVES 224 bkW/300 bhp @ 2200 rpm

    IND - B - DM8117-01

    Torque Metric
    N•m

    Engine
    Power kW

    BSFC
    g/kW-hr

    Engine Speed - rpm

    Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
    rpm kW
    2200 224 972 223.7 59.7
    2100 224 1019 221.1 59.0
    2000 224 1070 218.2 58.3
    1900 224 1126 215.8 57.6
    1800 224 1188 213.6 57.0
    1700 219 1229 213.7 55.7
    1600 212 1265 214.1 54.1
    1500 204 1300 214.9 52.3
    1400 197 1340 216.1 50.6
    1300 182 1339 218.6 47.5
    1200 168 1340 222 44.5
    1100 154 1340 225.9 41.6

    3 13 January 2011 8:58 PM


    ®
    C9 ACERT™
    Industrial Power Unit
    Tier 3/Stage IIIA
    PERFORMANCE CURVES 224 bkW/300 bhp @ 2200 rpm

    IND - B - DM8117-01

    Engine English
    Torque
    lb•ft

    Engine
    Power bhp

    BSFC
    lb/bhp-hr

    Engine Speed rpm

    Engine Speed Engine Power Engine Torque BSFC lb/bhp-hr Fuel Rate
    rpm bhp lb•ft gal/hr
    2200 300 717 .368 15.8
    2100 300 752 .363 15.6
    2000 300 789 .359 15.4
    1900 300 830 .355 15.2
    1800 300 876 .351 15.1
    1700 293 906 .351 14.7
    1600 284 933 .352 14.3
    1500 274 959 .353 13.8
    1400 264 988 .355 13.4
    1300 244 988 .359 12.5
    1200 226 988 .365 11.8
    1100 207 988 .371 11.0

    4 13 January 2011 8:58 PM


    ®
    C9 ACERT™
    Industrial Power Unit
    Tier 3/Stage IIIA
    RATINGS AND CONDITIONS 224 bkW/300 bhp @ 2200 rpm

    IND - B For service where power and/or speed are Engine Performance Diesel Engines — 7 liter and
    cyclic (time at full load not to exceed 80%). higher All rating conditions are based on SAE J1995,
    inlet air standard conditions of 99 kPa (29.31 in. Hg)
    dry barometer and 25ºC (77ºF) temperature.
    Performance measured using a standard fuel with
    fuel gravity of 35º API having a lower heating value
    of 42,780 kJ/kg (18,390 btu/lb) when used at 29º C
    (84.2º F) with a density of 838.9 g/L.

    Engine Dimensions
    (1) Length 2174.4 mm (85.61 in) Note: Do not use for installation design.
    See general dimension drawings for
    (2) Width 987.8 mm (38.89 in) detail (Drawing # 3376887 ).
    (3) Height 2008.1 mm (79.06 in)

    Performance Number: DM8117-01 © 2011 Caterpillar


    Feature Code: C09DI21 Arr. Number: 2524430 All rights reserved.
    Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
    16289360 CAT, CATERPILLAR, SAFETY.CAT.COM their respective logos,
    "Caterpillar Yellow," and the POWER EDGE trade dress, as well as
    corporate and product identity used herein, are trademarks of
    Caterpillar and may not be used without permission.

    You might also like