HALO

DESCRIPTION
Catalog # Type
The Halo Surface LED Downlight (SLD) incorporates WaveStream™
technology to create an ultra-low profile surface mounting luminaire
with the performance and look of a traditional downlight. SLD6-1200 Project
UNV series is designed for installation in many 4” x 2-1/8” deep square
junction boxes. Accessory mounting kit allows retrofit in 5” and 6” IC Date
Comments
and Non-IC recessed housings.* Suitable for residential or commercial
installations. Ideal for closets, storage areas, attics and basements.
Compliant with NFPA® 70, NEC® Section 410.16 (A)(3) and 410.16 (C)(5). Prepared by

SPECIFICATION FEATURES
CONSTRUCTION • Proprietary Slot-N-Lock quick • 90 CRI model features high
• Die cast aluminum trim ring, and installation system for junction color performance with R9
die formed aluminum frame box installation greater than 50
• T-bracket with Slot-N-Lock • Every Halo LED is quality tested,
OPTICS
mounting tabs included measured, and serialized in a
• WaveStream™ technology
permanent record to register
provides uniform luminance OPTIONAL - RECESSED HOUSING
lumens, wattage, CRI and CCT.
from a low profile flat lens MOUNTING
• Halo LED serialized testing and
• AccuAim™ optics provide • Accessory SLD6ACCKIT required
measurement ensures color
directional control for the for mounting in 5” and 6”
and lumen consistency on a
“cone-of-light” beam distribution enclosed recessed housings
of a traditional downlight. • May be installed in IC recessed
per-unit basis, and validates SLD6 1200 UNV
long-term product consistency
• Precision molded lens features housings in direct contact with
over time
Series
high transmission polymer with insulation
UV stabilized protecting film * Note: Not for use in recessed ELECTRICAL CONNECTIONS Universal Voltage
housings in direct contact with J u n c t i o n B ox
DESIGNER TRIMS SLD6128xxWHUNVJB
spray foam insulation. Refer to • Compatible with 4” x 2-1/8” deep
Accessories (sold separately)
SLD designer trims are accessory
NEMA LSD 57-2013 square boxes 80CRI
• The SLD6 may be used with any • Supply Wire Adapter with LED 2700K, 3000K, 3500K,
rings that attach to the SLD for a
5 or 6 inch diameter recessed quick connector included and 4000K
permanent finish.* Refer to SLD
housing constructed of steel • LED connector is a non-
accessories specification sheet for
or aluminum with an internal

80 2700K 80 3500K 80 4000KSLD6129xxWHUNVJB

details. screwbase luminaire disconnect
volume that exceeds 107.9 in³. for tool-less installation
• White (Paintable) nominal nominal nominal
• Satin Nickel LED Optional - Recessed 90CRI
CRI CRI CRI
2700K

3000K

3500K

4000K

2700K

3000K

3500K

4000K

2700K

3000K

3500K

4000K
• Tuscan Bronze • Linear LED arrays are Housings 2700K, 3000K, 3500K,
*SLD accessory trims attach with integrated in trim perimeter • Accessory SLD6ACCKIT required.
and 4000K
permanent adhesion and are not • Color Temperature: 2700K, 3000K, • LED connector is compatible with
interchangeable after installation. 3500K, 4000K Halo 5” H550 Series and 6” H750,
H2750 Series LED Housings 6” Surface LED
• CRI options: 80 and 90
2700K nominal
ELECTRICAL JUNCTION BOX
MOUNTING 80 3500K
- 90 CRI can be used for
California Title 24nominal
compliance/ 80 4000K
• LED Connector meets California
Title-24 high-efficacy
nominal luminaire
Downlight

• SLD may be used in compatible High Lumen 1200 Series

CRI CRI
standard as a non-screw base
2700K

3000K

3500K

4000K

2700K

3000K

3500K

4000K

2700K

3000K

3500K

4000K

certified to Title 20
electrical junction boxes in direct Universal Voltage
- 80 CRI can be used to comply LED DRIVER
contact with insulation including
with California Title 24 Non- • Driver is a 120V-277V universal 120V-277V
spray foam insulation
Residential Lighting Controls voltage input, high efficiency,
• Suitable for installation in many
4” x 2-1/8” deep square electrical
as a LED luminaire. dimmable electronic power Suitable for
junction boxes. WARRANTY supply providing DC power to the ceiling or wall

90 2700K 90 3500K 90 4000K electrical junction boxes

• Driver consumes 3 cubic inches Eaton provides a five year limited LED arrays
of junction box. nominal warranty on the SLD LED • Drivernominal
features high power nominal
E N E R G Y DATA
CRI
• Compatible with other junction
CRI
factor, low THD, and has integral
CRI
2700K

3000K

3500K

4000K

2700K

3000K

3500K

4000K

2700K

3000K

3500K

4000K

LED CHROMATICITY thermal protection in the event

boxes with accessory SLD6EXT
• A tight chromaticity specification of over temperature or internal
80 CRI 90 CRI
extension spacer ring.
ensures LED color uniformity, failure Lumens
• Installer must ensure 1215 1000
sustainable Color Rendering • Driver is replaceable if it should (4000K models)
compatibility of fit, wiring and
Index (CRI) and Correlated
2700K 90 3500K 90 4000K
proper mounting in the be required Input Voltage 120V-277V 120V-277V
Color Temperature (CCT) over • If dimming is not required the
electrical junction box.
nominal the useful life of the LED
nominal nominal
fixutre may be operated from a Frequency 50/60 Hz 50/60 Hz
This includes all applicable
CRI
• LED chromaticity of 3 SDCM
CRI
2700K

3000K

3500K

4000K

2700K

3000K

3500K

4000K

2700K

3000K

3500K

4000K

national and local electrical and switch Input Current 0.12 A 0.12 A
exceeds ENERGY STAR®
building codes. Input Power 14.8 W 14.8 W
color standards per ANSI.
Efficiency
82 lm/W 68 lm/W
(4000K models)
2700K 2700K
nominal CCT

nominal CCT

80 90
THD ≤ 20%
3000K 3000K
Power Factor ≥ 0.90

CRI 3500K
CRI
Refer to ENERGY STAR ® 3500KProducts List.
Certified T Ambient -30 - +40°C

4000K 4000K Sound Rating Class A

NOMENCLATURE
2700K 2700K
S L D 612 8 30 WH UNV JB
nominal CCT

nominal CCT

3000K
90 3000K 612 = 6” SLD 1200 Series
8 = >80 CRI
3500K
CRI 3500K
Refer to ENERGY STAR® Qualified Products List.
Can be used to comply with California Title 24 High Efficacy requirements.
30 = 3000K
WH = Matte White
4000K 4000K Certified to California Appliance Efficiency Database under JA8.
Indoor LED nominal CCT of 4000K or less.
UNV = Universal Voltage 120V-277V
JB = Junction Box Kit only

TD518030EN
11/13/2018
 page 2 SLD6128xxWHUNVJB
SLD6129xxWHUNVJB

DIMMING - PHASE CONTROL COMPLIANCE • 90 CRI: Can be used to comply

• Designed for continuous dimming • cULus Listed ceiling and wall with California Title 24 High
capability to nominally 5% with • cULus Damp Location listed Efficacy requirements. Certified
many 120V Leading Edge (LE) and ceiling and wall to California Title 20 Appliance
Trailing Edge (TE) Phase Control • cULus Wet Location Listed, ceiling Efficiency Database.
dimmers. (Dimmers with low only (shower rated) • 80 CRI: Can be used to comply
end trim adjustment offer greater • Suitable for use in closets, with California Title 24 Non-
assurance of achieving 5% level.) compliant with NFPA® 70, NEC® Residential Lighting Controls
• Consult dimmer manufacturer for Section 410.16 (A)(3) and 410.16 requirements as a LED luminaire.
compatibility and conditions of (C)(5) • Can be used for International
use. • SLD may be used in compatible Energy Conservation Code (IECC)
(Note some dimmers require a electrical junction boxes in direct and Washington State Energy
neutral in the wallbox.) contact with insulation including Code high efficiency luminaire
DIMMING - 0-10V
spray foam insulation compliance SLD6 1200 UNV
• With accessory SLD6ACCKIT, • ENERGY STAR® certified
• Dimmable to 10% in typical
may be installed in IC recessed luminaire - consult ENERGY Series
operation with compatible 0-10V
housings in direct contact with STAR® Certified Product List
DC low voltage dimmers.
insulation (Not for use in recessed • Contains no mercury or lead and
Universal Voltage
• 0-10V DC dimmers operate using
housings in direct contact with RoHS compliant. SLD6128xxWHUNVJB
two low voltage dimming wires
spray foam insulation. Refer to • Photometric testing in accordance
(color coded violet and gray). The 80CRI
NEMA LSD 57-2013) with IES LM-79
low voltage dimming wires are
• EMI/RFI: meets FCC 47CFR Part 15 • Lumen maintenance projections 2700K, 3000K, 3500K,
separate from the 120V AC or
Class B limits, and is suitable for in accordance with IES LM-80 and and 4000K
277V AC power.
use in residential and commercial TM-21
• Switching on/off is controlled
installations
via the line voltage (120V AC or SLD6129xxWHUNVJB
• Airtight certified per ASTM E283
277V AC) power, and dimming is
controlled via the 2-wire 0-10V DC
(not exceeding 2.0 CFM under 75 90CRI
Pascals pressure difference) 2700K, 3000K, 3500K,
low voltage wiring.
and 4000K

6” Surface LED
DIMENSIONS Downlight
7.79”
[197.87mm] High Lumen 1200 Series
Universal Voltage
120V-277V
.8” 7.79”
[21.46mm] [197.87mm]
Suitable for
ceiling or wall
electrical junction boxes

.7”
[17.28mm]

O R DE R I NG INFORMATIO N
SAMPLE NUMBER: SLD612927WHUNVJB SLD6TRMSN
Junction Box Installation: Order junction box separately, as supplied by others, to complete installation.
Recessed Installation: Order Halo recessed housing separately to complete installation.

Models Color Rendering Index Color Temperature (CCT) Finish Voltage Junction Box
SLD612= 6” Surface LED 8=80 CRI 27=2700K WH=White UNV=Universal Voltage JB=Junction Box Kit only
Downlight, 1200 Series 9=90 CRI 30=3000K 120V-277V
35=3500K
40=4000K

Accessories
Designer Trims RAD Adapters
Fit over the SLD for a designer finish When junction box is mounted flat on a ceiling or beam surface
SLD6TRMSN=6” SLD Satin Nickel (not recessed in ceiling)
SLD6TRMTBZ=6” SLD Tuscan Bronze SLD6RAD=6” SLD Round Surface J-Box Adapter, 7.92” O.D.
SLD6TRMWH=6” SLD White (paintable) (for 4-inch round or octagon junction boxes.)
*SLD accessory trims attach with permanent adhesion and are not interchangable after SLD6SADPLT=6” SLD Square Surface J-Box Adapter Plate
installation (For 4-inch square junction boxes, use with SLD6RAD.)

J-Box Spacer Extension Ring Hardware Kits

Add 15/16” depth when SLD driver cannot fit into installed junction box SLD6ACCKIT=6” Accessory Parts Replacement Kit
SLD6EXT=6” Surface LED J-Box Extender, 9.5” O.D. (Screwbase adapter, torsion springs, friction blades)
SLD6BRKT=6” Junction Box Bracket & Screws

Refer to SLD Accessories specification sheet for further information.

2 TD518030EN – Specifications and compliances subject to change without notice

page 3 SLD6128xxWHUNVJB
SLD6129xxWHUNVJB

COMPATIBLE WITH EATON’S CROUSE-HINDS 4” SQUARE JUNCTION BOXES

• TP450 - for non-metallic cable

• TP431 - for metal clad cable
• UL Listed
• Refer to www.crouse-hinds.com

TP450 TP431†
for non-metallic cable for metal clad cable
4” x 4” x 2-1/8” 4” x 4” x 2-1/8”
(102mm x 102mm x 54mm) (102mm x 102mm x 54mm)

†UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP™). MCAP™ is a registered trademark of Southwire Company.

COMPATIBLE WITH 4” SQUARE JUNCTION BOXES*

SLD6EXT
SLD6-1200 UNV

Compatible with other boxes when used

with SLD6EXT extension spacer ring.
4" square deep steel box
4" x 4" x 2-1/8"
(102mm x 102mm x 54mm)

*This is a representative list of compatible junction boxes only. Information contained in this literature about other manufacturers’ products is from published information
made available by the manufacturer and is deemed to be reliable, but has not been verified. Eaton makes no specific recommendation on product selection and there are no
warranties of performance or compatibility implied. Installer must determine that site conditions are suitable to allow proper installation of the SLD mounting bracket in the box.

PRODUCT DATA

Cat No. CRI CCT Lumens Power (W) LPW

SLD612827WHUNVJB 80 2700 1100 14.8 74
SLD612830WHUNVJB 80 3000 1150 14.8 78
SLD612835WHUNVJB 80 3500 1200 14.8 81
SLD612840WHUNVJB 80 4000 1215 14.8 82
SLD612927WHUNVJB 92 2700 880 14.8 59
SLD612930WHUNVJB 92 3000 925 14.8 63
SLD612935WHUNVJB 92 3500 965 14.8 65
SLD612940WHUNVJB 92 4000 1000 14.8 68

Performance values are presented as typical for the model(s) indicated. Field results may vary.

Specifications and compliances subject to change without notice – TD518030EN 3

 page 4 SLD6128xxWHUNVJB
SLD6129xxWHUNVJB

LIGHTING FACTS ®
SLD612827WHUNVJB - 80 CRI SLD612830WHUNVJB - 80 CRI SLD612835WHUNVJB - 80 CRI SLD612840WHUNVJB - 80 CRI

SLD612927WHUNVJB - 90 CRI SLD612930WHUNVJB - 90 CRI SLD612935WHUNVJB - 90 CRI SLD612940WHUNVJB - 90 CRI

Eaton
1121 Highway 74 South
Peachtree City, GA 30269 Specifications and
P: 770-486-4800 dimensions subject to
www.eaton.com/lighting change without notice.