Scribd
Upload
93 views1 page

GND GND: Pcint17 Pcint16 Pcint14 Pcint18 Pcint19 Pcint20 Pcint21 Pcint22 Pcint23 Pcint0 Pcint1

This document provides a pinout diagram and specifications for an Arduino Pro Mini microcontroller board based on the ATmega328P chip. It identifies the functions of each pin including power, ground, analog and digital input/output, serial communication, and interrupts. Key specs listed include the microcontroller, voltage and current limits, memory size, and features such as ADC resolution and PWM bits.

Uploaded by

dc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
93 views1 page

GND GND: Pcint17 Pcint16 Pcint14 Pcint18 Pcint19 Pcint20 Pcint21 Pcint22 Pcint23 Pcint0 Pcint1

This document provides a pinout diagram and specifications for an Arduino Pro Mini microcontroller board based on the ATmega328P chip. It identifies the functions of each pin including power, ground, analog and digital input/output, serial communication, and interrupts. Key specs listed include the microcontroller, voltage and current limits, memory size, and features such as ADC resolution and PWM bits.

Uploaded by

dc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Name ADC

Arduino Pro Mini (DEV-11114)


Power PWM Programmed as Arduino Pro Mini w/ ATmega328
8MHz / 3.3V
GND Serial

Control Ext Interrupt

Arduino PC Interrupt

Port Misc GND CTS VCC TXO RXI


To FTDI breakout
DTR

GRN
BLK
FTDI Header
To target board
GND GND VCC RXI TXO DTR

PCINT17 TXD PD1 D1 TX0 RAW RAW


PCINT16 RXD PD0 D0 RXI GND GND
PCINT14 PC6 Reset RST RST Reset PC6 PCINT14
GND GND VCC VCC
PCINT18 INT0 PD2 D2 2 A3 A3/D17 PC3 ADC3 PCINT11
OC2B PCINT19 INT1 8-bit PD3 D3 3 A2 A2/D16 PC2 ADC2 PCINT10
XCK T0 PCINT20 PD4 D4 4 A1 A1/D15 PC1 ADC1 PCINT9
T1 OC0B PCINT21 8-bit PD5 D5 5 A0 A0/D14 PC0 ADC0 PCINT8
AIN0 OC0A PCINT22 8-bit PD6 D6 6 13 D13 PB5 SCK PCINT5 LED
IN1 PCINT23 PD7 D7 7 12 D12 PB4 MISO PCINT4
CLKO ICP1 PCINT0 PB0 D8 8 11 D11 PB3 8-bit MOSI PCINT3 OC2A
OC1A PCINT1 8-bit PB1 D9 9 10 D10 PB2 8-bit SS PCINT2 OC1B
Reset Button

A5 A5/D19 PC5 ADC5 SCL PCINT13


A4 A4/D18 PC4 ADC4 SDA PCINT12

A7 A7 ADC7
A6 A6 ADC6

ATmega328P
Power Absolute maxiumum VCC: 6V LEDs
Raw: 3.3V-16V (4V-12V recommended) Maximum current for chip: 200mA Power: Red
Maximum current per pin: 40mA
VCC:3.3V User (D13): Green
Recommended current per pin: 20mA
Maximum current: 150mA @3.3V 8-bit Atmel AVR
Flash Program Memory: 32kB
EEPROM: 1kB
Internal SRAM: 2kB
ADC: 10-bit
PWM: 8bit

You might also like