Shenzhen NICEUC Communication Tech Co., LTD www.niceuc.

com

RoIP Gateway (Radio over IP Gateway)

Models: NC-MG221, NC-MG232R, NC-MG320R, NC-MG640R, NC-MG930R

NC-MG221
2 ports Radio

NC-MG232R
8 ports Radio

NC-MG320R
4 ports Radio

NC-MG640R
16 ports Radio

NC-MG930R
48 ports Radio

What is RoIP?
˙Radio over Internet Protocol, or RoIP, is similar to Voice over IP (VoIP), but augments two-way radio communications rather than

telephone calls. It is essentially VoIP with PTT (Push To Talk). To the user it can be implemented like any other radio network.

˙With RoIP, at least one node of a network is a radio (or a radio with an IP interface device) connected via IP to other nodes in the

radio network. The other nodes can be two-way radios but could also be dispatch consoles either traditional (hardware) or modern

(software on a PC), POTS telephones, softphone applications running on a computer such as Skype phone, PDA, smartphone, or

some other communications device accessible over IP.

˙RoIP can be deployed over private networks as well as the public Internet. It is useful in land mobile radio systems used by public

safety departments and fleets of utilities spread over a broad geographic area.
Tel：+86-755-33965990/26722761 [email protected]
Address：Room 101-1102, Yuquan Road, Nanshan District, Shenzhen, Guangdong province, China
 Shenzhen NICEUC Communication Tech Co., LTD www.niceuc.com
˙RoIP systems routinely combine VHF, UHF, POTS telephone, Cellular telephone, SATCOM, air-to-ground, and other technologies

into a single voice conversation. This makes it especially valuable to the much-documented problems with communications

interoperability.

Overview
˙RoIP Gateway is a voice gateway that makes connection between radio and IP network. There are so many radio

intercom systems, like: Analog Radio, TETRA Digital Radio, GOTA Digital Radio, etc, different radio intercom systems

make isolated information island, cannot achieve interconnection and interworking.

˙A variety of radios with PSTN, IP phones, GSM/CDMA/WCMDA/4G LTE and other common communication networks

are able to achieve interconnection and interworking.

˙In application areas such as emergency dispatching, isolated information island is the biggest obstacle to

effectiveness.

˙The integration of the radio intercom networks, traditional telephone communications network and NGN network is

imperative. RoIP Gateway from NICEUC is designed to match with such requirements, which supports 4 to 48 radio

lines per unit. It is used in connecting, building complete varieties of Radio communication networks.

Function
˙ Each line interface of RoIP Gateway can be used as a terminal which registers to NGN SIP Server.

˙ Radios can call the preset number of each line interface of RoIP Gateway via PTT button or DTMF dialing. This
number can not only correspond to a terminal; but also can correspond to an intercom group and conference group.

˙ Wired telephone call line number of RoIP Gateway then can be switched on connecting to the radio intercom devices
which has same radio as line of RoIP Gateway.

˙ Different standards of radios can be achieved interconnection and intercommunication through RoIP Gateway.

˙ Support multi-level preemption rights of mix of wired and wireless.

˙ When using the device, each line interface corresponds to a radio channel, so that you can access the same radio
intercom systems to IP communication system.

˙ A variety of standard digital radios and analog radios can be involved in IP communication system

˙ Through other conversion gateways, radios with GSM/CDMA and other mobile networks can communicate with each
other.

˙ It has analog radio interfaces, TETRA digital radio interfaces, Motorola Radios or GOTA, etc., HF, UHF or VHF radio
interfaces and other wireless radio interfaces.

Tel：+86-755-33965990/26722761 [email protected]
Address：Room 101-1102, Yuquan Road, Nanshan District, Shenzhen, Guangdong province, China
 Shenzhen NICEUC Communication Tech Co., LTD www.niceuc.com

Specifications
Item NC-MG221 NC-MG232R NC-MG320R NC-MG640R NC-MG930R
Slot for PSU N/A(Built-in) N/A(Built-in) N/A(Built-in) N/A(Built-in) 1 to 2 (Hot-standby)
Slot for MCU
N/A(Built-in) N/A(Built-in) 1 1 1 to 2 (Hot-standby)
card
Slot for 4 ports
N/A(Built-in) 2 1 4 12
Radio card
Radio /PTT port 1 to 2 1 to 8 1 to 4 4 to 16 16 to 48
VoIP Channels 16 16 or 32 64 64 64 or 128

Ethernet port One 10/100/1000M Base-T Two 10/100/1000M Base-T

Console port One RS232 port (Console Management port)

Radio
Motorola, Hytera, TETRA, etc
Compatibility
SIP Compatibility CISCO, Siemens, AVAYA, Huawei, ZTE, etc
DC-48V or AC
Power supply DC-48V or AC DC-48V or AC
AC 110-240V AC 110-240V 110-240V
unit 110-240V 110-240V
(Redundancy）
Power 20W 30W 40W 50W 100W
480mm*240mm*44 480mm*325mm* 480mm*325mm*4 480mm*300mm*88 480mm*300mm*160
Machine size
mm(1U)0 44mm (1U) 4mm (1U) mm (2U) mm (3.5U)
Weight 3KG 4.5KG 4.5KG 5.5KG 10.5KG

Environment Temperature0℃－50℃ Humidity 10％－90％Non-condensing

Tel：+86-755-33965990/26722761 [email protected]
Address：Room 101-1102, Yuquan Road, Nanshan District, Shenzhen, Guangdong province, China
 Shenzhen NICEUC Communication Tech Co., LTD www.niceuc.com

Application
1. Connection between Radios and IP phones (such as IP Dispatching system)

˙ IP phones can dial the line number of RoIP Gateway which connected to radios, then attend the radio intercom.

˙ IP phone can press "*1*" (or other definable function keys)to apply for right of calls, if the application is successful,
RoIP Gateway will play a prompt tone "start to speak", and then IP phone can speak;

˙ IP phone can press "*2*" (or other definable function keys) to release right of calls. After right of calls are released,
RoIP Gateway will play a prompt tone "start to listen", so the other terminal can apply for the right to speak

˙ The TETRA terminal can directly press the PTT button for the right of calls and release the PTT button to release the
right of calls.

˙ When IP terminals occupy right of calls, other radio terminals with same radio can hear the content of the calls of IP
Tel：+86-755-33965990/26722761 [email protected]
Address：Room 101-1102, Yuquan Road, Nanshan District, Shenzhen, Guangdong province, China
 Shenzhen NICEUC Communication Tech Co., LTD www.niceuc.com
terminal, and vice versa.

˙ The application mode can realize the integration of wired dispatching and radio dispatching. At office with signals of
radio, you can use IP phone to initiate intercom with radio system, and greatly expand the scope of dispatching to
achieve seamless integration of wired system and radio system.

2. Dispatching System in different places via RoIP Gateway

˙ Break through the restriction of radio region, the dispatching center can realize the scheduling of radio systems in
different places.
˙ The dispatch center call number of RoIP Gateway in different places, it can establish intercom with remote radio
users.

Tel：+86-755-33965990/26722761 [email protected]
Address：Room 101-1102, Yuquan Road, Nanshan District, Shenzhen, Guangdong province, China
 Shenzhen NICEUC Communication Tech Co., LTD www.niceuc.com
3. Connection of Radios with different frequency or bands

˙ RoIP Gateway from NICEUC has analog radio interfaces, TETRA digital radio interfaces or GOTA, etc., shortwave
radio interfaces and other wireless radio interfaces.

˙ According to the nature of accessing radios, we can perform customization access over RoIP Gateway, each line can
be connected to different frequencies or bands of radios.

˙ Dispatching system can dispatch radio systems with different frequencies or bands on basis of RoIP Gateway.

Tel：+86-755-33965990/26722761 [email protected]
Address：Room 101-1102, Yuquan Road, Nanshan District, Shenzhen, Guangdong province, China