AUTOCAD 2D COMMAND LIST
COMMAND SHORTCUT
1 Ribbon Introduction
Open Open
New New
Save or Save As Save/ Saveas
Quick save Qsave
Exit Quit
2 Limits limits
3 customize User interface CUI
4 Unit UN
5 Option OP
6 Drafting Setting DS
to turn on/ off press F7. and Grid setting. press DS
command or on Grid toggle button press drafting
7 Grid setting. grid display command for display.
8 Coordinate System to draw line system Various Coordinate system is used.
9 Osnap F3 for on or off
Sn command. to turn on/ off press F9. and Snap setting.
press DS command or on snap toggle button press
10 Snap drafting setting
11 Ortho F8 for ortho on /off
12 Polar F10 for polar on/off
13 Dynamic Input F12 for On/off
14 Otrack F11 for On/off
15 Line L
16 Circle C
17 Rectangle Rec
18 polyline Pl
19 Polyline Edit Pe
20 Elipse El
21 Arc A
22 Polygon Pol
23 spline fit spl then select method it shows fit & Cv
24 Spline CV Spl
25 Spline Edit Spe
Multiline Ml
Multiline Style Mlst
Multiline Edit Mled
26 Wipeout Wi
27 Construction Line Xl
28 Ray Line Ray
29 Point po
30 revision Cloud
31 Divide Div
32 Measure Me
33 Point type Pt
34 Block B
35 Undo cntl+z
36 U u
37 Redo cntl+y
38 Oops Oops
39 Window Selection
40 Pickauto pickauto
41 Zoom
42 Pan P
43 Plan Pla other option zoom+Extend
44 3D Orbit 3do
45 View
46 Viewres viewres
47 Move M
48 Copy Co
49 Rotate Ro
50 Offset O
51 Mirror mi
52 Scale Sc
53 Break at Point
54 Break Br
55 Trim Tr
56 Extend Ex
57 Array Ar
58 Array Edit Arrayedit
59 Fillet F
60 Chamfer Cha
61 Erase E
62 Stretch S
64 Explode X
65 Join J
66 Reverse Reve
67 Lengthen Len ( De/P/T/Dy)
68 Single text Dt
69 Multiline text T/Mt/Mtext
70 Text style St
71 Text Edit Ed or double click on any text
72 Quit text Qtext
73 Mirrortext Mirrtext: 0 for no effect.1 for effect
74 Linetype Lt
75 Line type scale Ltscale
76 Line weight Lw
77 Properties Mo
78 Quick Properties
79 Match properties Ma
80 Solid So
81 Donut Do
82 Fill Fill
83 Fill mode Fill mode.
84 Hatch H
85 Hatch Edit HE
86 List list
Id id
87 Area Are
88 Measure geometry we can measure geometry like paremeter, area etc
89 Distance Di
90 Dimension
91 Dimension style D
92 Layer La
93 Parametric design 2==
94 Constraint setting
95 Command line to on press cntl+9
Region Reg
Mass Properties massp
Blipmode blipmode
Redraw R
Regen re
view cube Navvcube
Nevigation bar Navbar
Productivity Tools
Group
Block B
Insert I
BE or double click on block or select block and right click
Block editor and edit block in place
write block W
Redefine Block
Purge/remove Purge/Remove
divide
Measure
Rename
Filter Fi
select object and right click and select similar it will
Select Similar select similar objects.
Quick selection Qse
Ddptype or point type Ddp
Attribute Definition
Edit Attribute definition
Attribute Edit attedit
Enhance Attribute edit Eattedit
Attribute display Attdis
Attribute dialoc Attdia
Battman Battman
table
Table style.
Design Center adcenter or cntl+2
Design Center Creation
Tool palletes
Tool palletes Creation.
2D animation
Script Language Scr
actrecord and actstop for stopping and save the
Action Recorder recordingcommand
Linetype creation Mkltype
shape Shape
Mkshape Mks
Hatch Pattern Creation Super Hatch tool From Express tool. sup command
Drawing Templete Creation
Own Command Creation Command alias editor in express tool.
Plot and Layout Plot: Output manu.
External referance xref
Xbind Xb
Referance Edit Refedit
Referance Close refclose
Ncopy Ncopy
3d Command List
Vpoint(direction) Vp
View port Vport
Thickness Th
Elevation Ele
Multiple Multip
Hide Hi
Ruled surface rulesurf
Revolve surface revsurf
Edge surface Edgesurf
Tab surface Tabsurf
surftab1 Surftab1
surftab2 Surftab2
3d Move
3d mirror
3d rotate
3d scale
3d Arrey
3d align
3d Polyline
Region Re
Helix
Extrude
Revolve
Loft
Sweep
Presspull
Polysolid
3d orbit
Fillet
Chamfer
boolen Operation
interference
Visual style
3d Surface
Mesh modeling
3d Solid
Ucs
Dynamic Ucs
MMAND LIST
To set the limit in which drawing is drawn. type limits the
give lower cordinate (0,0) then give any upper coordinate
value. then enter then limits on and off option.
to set the unit system in autocad. like inch. mm etc.
to set the various option regarding autocad configuration.
to setting the various drafting toggle like snap, grid ,ortho,
polar etc.
The grid is a rectangular pattern of lines or dots that covers
the entire XY plane of the user coordinate system (UCS).
Using the grid is similar to placing a sheet of grid paper
under a drawing. The grid helps you align objects and
visualize the distances between them.
(1) Absolute system: type cordinate in command line with
respect to origin 0,0
(2) Relative System: type coordinate in Dynamic input.
every point become origin point. if you type 20, 0 that will
take @20, 0
(3) Polar System: Every point become origine and
cordinate become 20 < 0
(1) Geometric cener: to locate center of uneven shape
other than circle (2) insertion: to pick the end of any text
for movement. (3) Nearest: to locate any point where you
clicked on object. (4) Apperant Intersection: to find the
intersection point in isometric drawing view.
Snap mode helps in superfast drafting if the dimensions of
your object are multiples of a particular number. This is
because,in snap mode the crosshair(cursor) jumps or Snaps
only the distances which are multiples of snap distances
you have mentioned in the drafting settings.
On position: to draw line in horizontal and vertical
direction. off position: Draw line in any direction
To draw line in set of angle. we can also add own angle in
polar setting.
on position: Type command in screen
Off Position: Type command in Command line
to track the extension of any line for further drawing.
to draw line
to draw circle.
to draw rectangle
to draw the splines. after drawing we got many fit pont on
sp line by click. we can change spline by various fit point
option by right click.
to draw more accurate spline it shows the control vertices.
To hide the some drawing on screen.
to draw the full screen line by just one click.
to draw no of line in any direction from selected point.
to devide the the segment in equal part.
to change the point type. use in divide and measure
command (2) go to utility menu and point style and change
point
if you not want to use points from ptype. then make your
own point then B enter. then name the point. then pick
point then select object then convert it into block. then
select devide command. use block command
to revers the previous actions or commands. suppose we
draw circle and then erase now draw arc now we take undo
2 time that erase arc first and then reverse circle again we
go undo that erase circle.
reverse the last command we used.
to revers the undo command.
to revese the last erase action even if you have done any
thing after erase. suppose we draw circle and then erase
now draw arc now. now if we take oops command that
reverse circle without erasing the arc.
to convert different selection method like cpolygon to cross
selection. 2nd method for selection method type op for
option then selection. and to unselect any object press shift
and select the selected object for unselect.
(1) All: it zoom all limmits along objects.(2) it focus on object only similar to plan command. (3) dynamic: it provide one window
To rotate object in any direction whether in 2D or 3D
To smooth the curve and circle
(1) By viewres command: type viewres command then type
yes and then give value between 1000 to 20000
(2) by Option: type op for option command then go to
display and give value between 1000 to 20000 in display
resolution in arc and circle smmothness
to reverse the direction points of any object.
to change the length size of line or arc by changing the
angle
if you want to edit multi text. after editing any text dont
presee enter. just press click outsite the edited text. it
shows square box. u just click on another text whose text
you want to change. hear you need not to change again ed
command.
to hide text. first write command and then on. now you
type any text. it will hide in box. if doesnt appear wheather
you move box or not. to show hidden text. again type
command and off. it also doesnt appear text. but when you
move box slidly. text will appear again.
if you chose 0 after mirror text command. if doesnt give
mirror image of text in normal mirror command.
to change line types like like dotted line. center line etc.
to change the scale of line types. suppose if you drew more
then one line. and you give line type scale. it will change
scale of all line simultaneously. to change for individual line.
select that line and type Mo command and change scale.
to change thickness of lines. to show line weight. first turn
on line weight toggle.
to change the quick properties. turn on quick properties
toggle. or go to drafting setting and click on select on quick
properties.
for matching the properties of drawing
to fill the drawing like solid fill as we do in hatch solid fill.
first type command then select cornour point of polygon
one by one.
by giving on/off we can change the fill type in donut
command.
similar to fill command only you need to type 0/1 for on
/off vice versa.
by list command we can show all the detail about selected
object in text window.
to know the coordinate of selected point.
for opening. press gui command then press pallete then
command line and press yes
convert object into region object(non editable object).
sometime object can be region before union, substract and
interface command.
to check mass property of any object first convert it into
region object by reg command.
Control the marker of blips. when blipmode is on a
temporary mark in the shape of plus mark appear where
the points are specified.blipmode is off by default.
refresh the entire current view. after redraw command all
blip point will disappear.
Regenerates the entire drawing from the current viewport.
(1)to view view cube go to option(op) command then 3d
modelibg. and check mark on display the viewcube both
option. (2) Navvcube command then on/off
1 for on & 0 for off.
y Tools
to insert the block. which we made.
we can delete many thing. like block also
to rename anything in autocad.like block etc.
to select the own choice objects along targeted area only
which is not possible in select similar.
to change the point style and point size. similar to pt (point
type) command.
Double click on attribute...
to open edit attribute di
in enhance attribute edit we can edit only selected attribute.
to hide attribute text from the block
to display the edit attribute dialoc box. give it value 1 for open
To open block attribute manager. in block attribute
manager if we change any one attribute text. it will change
all.
make objects and group it before script language in notrpad
save script language in .scr extension.
to open recore go in manage manu.
to make linetype with text only.
to open shape which made by mkshape command.
to make linetype with shape. first use shape then mkltype
option to make line type.
make any shape then convert into block and then sup
command.
after editing in refedit command go for refclose command
for save and close.
for copy many opject from external referance after copy
detech that external referance. we can also copy object
from block with Ncopy command.
nd List
Creates a vector that defines a direction from which the
drawing can be viewed. we can change view like front view,
top view, isometric view etc.
in 3d drawing. for converting 2d view into hidden visual
style. again go to return type regen all command.
Geometry should be closed. Other wise it should not be
worked
make geometry like polyline geometry.
(3) dynamic: it provide one window for selection window can be resize by mouse.
