Fursecem Conductive Aggregate: Resistance Versus Diameter

FurseCEM™ conductive aggregate
Certain ground conditions make it difficult to obtain a reliable

earth resistance, whilst particular installations may require a very
low resistance. In such cases, FurseCEM™ provides a convenient
and permanent solution.
By adding FurseCEM™ in place of sand and aggregate, to cement, a
conductive concrete is formed. This electrically conductive medium has
many applications in the electrical/construction industry including RF and
microwave screening, static control and of course earthing for which it
was specifically developed.
When used as a backfill for an earth electrode, FurseCEM™ impregnated
concrete greatly increases the electrodes’ surface area. For example,
increasing the effective diameter of a rod from typically 15 mm to 200 mm,
could lower its resistance to earth by as much as 50% (see graph below).
Resistance versus diameter

80
Rod only
70
Ø 100mm backfill
Ø 200mm backfill
60
Resistance to earth (Ohms)
50
40
30
20
10
0
0 1 2 3 4 5 6 7
Rod depth (m)
: a permanent solution to earthing problems
Features and benefits
l Permanent earth reading
Resistivity that will remain constant over the life of the installation
without the requirement for maintenance
l Constant volume
Regardless of water content, FurseCEM™ will not shrink or expand,
thus maintaining constant contact between the earth electrode and
the soil Topsoil
l Cost effective
Reduces drilling, saves on earthing materials, and requires no
expensive maintenance
l Non leaching
FurseCEM™ is a conductive concrete and therefore cannot be
washed away
Sand, rock
l Chemically inert and shale
Concrete mix
Completely non-corrosive, and will not in any way damage earth
electrodes, steelwork or concrete
l Fast drying properties
Allows for quick and easy installation
l Mechanical strength
Provides high compressive strength where required Earth rod
electrode
l Long shelf life
Can be stored for long periods without deterioration
l Versatile installation
Suitable for use in boreholes and trenches
FurseCEM™ concrete used as a backfill for a
conventional earth rod to achieve a lower
FurseCEM™ conductive aggregate earth electrode resistance.
Description Sack Weight Part No.
FurseCEM™ 25 kg CM025
FurseCEM™ (supplied with cement) 25 kg CM030
FurseCEM™ should be mixed in a 3:1 ratio by weight (not volume).
FurseCEM™ versus other methods of earth improvement

Chemical solutions – such as copper sulphate, sodium l are costly
carbonate, calcium sulphate and sodium chloride (table salt) l are subject to leaching or washing away of the chemicals
mixed with charcoal are sometimes poured into the ground to unless maintained
improve earth readings, but these have the disadvantages of:
Bentonite – and certain other compounds intended to absorb
l being required in large quantities to make a difference
and retain moisture around an earth electrode:
l requiring constant moisture to remain effective l rely on constant moisture to maintain volume and hence
l drying out if moisture is not present work effectively
l eventually leaching out of the soil, returning the earth l without moisture, drying and shrinkage occur, causing
resistivity to its former high value, unless regularly and loss of contact with the surrounding soil, and a
expensively maintained deterioration in the earth reading
l causing corrosion of the earth electrode system and l regular checking and/or maintenance may be required
deterioration of concrete (particularly relevant to
F-ERS-0210
FurseCEM™ – is a non-corrosive permanent solution to

transmission towers). earthing problems, providing a fixed earth reading that will
Chemical earth rods – perforated metal tubes packed with a not vary significantly regardless of seasonal factors, and
chemical compound are also sometimes used, but these: without maintenance.
Thomas & Betts Ltd, Furse, Wilford Road, Nottingham, NG2 1EB, UK
Tel +44 (0)115 964 3700 • Fax +44 (0)115 986 0538
Email [email protected] • Web www.furse.com

Fursecem Conductive Aggregate: Resistance Versus Diameter

Uploaded by

Copyright:

Available Formats

Fursecem Conductive Aggregate: Resistance Versus Diameter

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fursecem Conductive Aggregate: Resistance Versus Diameter

Uploaded by

Copyright:

Available Formats

FurseCEM™ conductive aggregate

Certain ground conditions make it difficult to obtain a reliable

Resistance versus diameter

Description Sack Weight Part No.

FurseCEM™ (supplied with cement) 25 kg CM030

FurseCEM™ should be mixed in a 3:1 ratio by weight (not volume).

FurseCEM™ versus other methods of earth improvement

FurseCEM™ – is a non-corrosive permanent solution to

You might also like