Scribd Logo
Upload

Welcome to Scribd!

  • 128 views

    Channel Strip: X32 DIGITAL MIXER Preliminary User Manual

    Uploaded by

    hrbina
    The document describes the channel strip layout and functionality of the X32 digital mixer. The channel strip contains controls for important processing parameters like EQ, dynamics, and effects. Rotary knobs are surrounded by LED collars to indicate parameter values. Not all controls are available for certain channel types like output buses. The input channels are arranged in banks of 16 channels that can be switched between using layer buttons to access up to 32 total input channels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Channel Strip: X32 DIGITAL MIXER Preliminary User Manual

    Uploaded by

    hrbina
    128 views1 page
    The document describes the channel strip layout and functionality of the X32 digital mixer. The channel strip contains controls for important processing parameters like EQ, dynamics, and effects. Rotary knobs are surrounded by LED collars to indicate parameter values. Not all controls are available for certain channel types like output buses. The input channels are arranged in banks of 16 channels that can be switched between using layer buttons to access up to 32 total input channels.

    Original Title

    behringer-digital-mixer-x32-user-6

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the channel strip layout and functionality of the X32 digital mixer. The channel strip contains controls for important processing parameters like EQ, dynamics, and effects. Rotary knobs are surrounded by LED collars to indicate parameter values. Not all controls are available for certain channel types like output buses. The input channels are arranged in banks of 16 channels that can be switched between using layer buttons to access up to 32 total input channels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    128 views1 page

    Channel Strip: X32 DIGITAL MIXER Preliminary User Manual

    Uploaded by

    hrbina
    The document describes the channel strip layout and functionality of the X32 digital mixer. The channel strip contains controls for important processing parameters like EQ, dynamics, and effects. Rotary knobs are surrounded by LED collars to indicate parameter values. Not all controls are available for certain channel types like output buses. The input channels are arranged in banks of 16 channels that can be switched between using layer buttons to access up to 32 total input channels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    6 X32 DIGITAL MIXER Preliminary User Manual

    VIEW

    VIEW

    VIEW VIEW VIEW VIEW VIEW

    Channel Strip the LED collar and the gain knob are turned off, because there is no input gain to
    be controlled on an output bus.
    The X32’s channel strip offers dedicated controls for the most important processing
    parameters of the currently selected channel. To adjust controls for a given channel The channel strip consists of the following sub-sections:
    strip, simply press the Select button on the desired input or output channel.
    • Config/Preamp
    Certain sections of the channel strip (such as the low cut filter, noise gate, EQ and
    • Gate, Dynamics
    compressor) contain a respectively labeled button that can be pressed to switch
    the specific effect on and off. The button illuminates to show the effect is active, • Equalizer
    and goes dark when bypassed.
    • Bus Sends, Main Bus
    Within the channel strip, the rotary control knobs are surrounded by an amber
    Each of these subsections correspond to the processing steps of the currently
    LED collar that indicates the parameter’s value. Whenever this backlit knob is
    selected channel, and they each have their own View button that, when pressed,
    turned off, it indicates that this specific control/parameter is not available for
    switches the Main Display to a page displaying all related parameters for
    the selected channel type. For example, if an output bus is currently selected,
    that subsection.

    10 10 10

    5 5 5

    0 0 0

    –5 –5 –5

    –10 –10 –10

    – 20 – 20 – 20

    – 30 – 30 – 30

    – 40 – 40 – 40

    – 50 – 50 – 50

    – 60 – 60 – 60

    – 00 – 00 – 00

    Input Channel Banks • Input Channels 1-16


    You will find a select button on top of every channel that is used to direct the • Input Channels 17-32
    control focus of the user interface, including all channel related parameters
    • Auxiliary Inputs 1-6/USB playback/FX Returns 1L-4R
    (channel strip and main display), to that channel. Please note that at any time,
    there is exactly one channel selected (either Input Ch 1-32, Aux 1-8, FX Returns Press any of the correspondingly labeled layer buttons on the left side of the
    1L-4R, Mix Bus 1-16, Main LR/C, or Matrix 1-6). DCA Groups (digitally controlled console to switch the input channel bank to any of the three layers listed above.
    amplifier) cannot be selected because they control a number of assigned The button will illuminate, reminding you which layer is active.
    channels rather than one specific channel.
    A fourth layer (Bus Masters) is also offered, allowing you to adjust the levels of
    The Input Channels section of the console is located on the left hand side, and the 16 Mix Bus Masters, which is useful when you wish to include Bus Masters
    offers 16 separate input channel strips. These 16 channel strips represent three into DCA Group assignments.
    separate layers of inputs for the console, including:

    You might also like