Scribd
Upload
40 views

Modified Ratios

The document provides calculations for reinforcement of anchors connecting a Brazilian pavilion structure to a concrete foundation. It determines that 2 hairpin shear bars and 4 U-shaped tension bars per anchor are required to reduce the utilization levels from over 600% in shear and over 1400% in tension to within acceptable limits of 32% in shear, 83% in tension, and 93% for the combined interaction of tension and shear. Development lengths of 400mm and 840mm are also calculated for the shear and tension reinforcement, respectively.

Uploaded by

Bassem Khaled
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
40 views

Modified Ratios

The document provides calculations for reinforcement of anchors connecting a Brazilian pavilion structure to a concrete foundation. It determines that 2 hairpin shear bars and 4 U-shaped tension bars per anchor are required to reduce the utilization levels from over 600% in shear and over 1400% in tension to within acceptable limits of 32% in shear, 83% in tension, and 93% for the combined interaction of tension and shear. Development lengths of 400mm and 840mm are also calculated for the shear and tension reinforcement, respectively.

Uploaded by

Bassem Khaled
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Additional Rienforcement Calculation according to EN 1993‐1 & ETAG & ACI318‐4

Project: Brazilian Pavilion
Date: 23/05/2020 Checked by
Detail ID: C01‐SC01 Eng.Bassem Khaled
INPUT
Grade of Rienf.: 460B
Φ = 0.75
Fu = 500 Mpa
Fy = 460 Mpa
Grade of Rienf.: C30
f'c = 30 Mpa
Total Tension Force  N 195.8 kN
max. Tension Force/ bolt Ft,Ed = 186.4 kN
Bolt tension resistence Ft,Rd = 224.7 kN
Punching shear resistence Bp,Rd = 635.5 kN
Concreet breakout NRd,c = 13 kN
Total Shear Force  V 1.5 kN
max. Shear Force/ Anchor VED 46.4 kN
Plate Bearing resistance Fb,Rd 336.5 kN
Anchor shear resistance VRd,s 146.9 kN
 Conc. pryout resistance VRd,cp 31.2 kN
Conc. edge failure resistance VRd,c 7.7 kN

OUTPUT
For Shear:

Utilization in shear  per anchor: (EN 1993‐1) (ETAG 001)
Uts = V Ed/min( Fb,Rd ;VRd,s; VRd,cp; VRd,c)
603%

Extra Shear Reinforcement:(ACI 318‐11)
n (no. of required cross section) = 2 bars
V = (Max. Shear Force/Anchor) 46.4 kN
V= n A Fu Φ (D.5.2.9)
2
n x π x r  x Fu Φ
r = (Tx1000/n x π x Fu Φ)0.5
4.44 mm
Use 1Φ10 Gr.460B (Hair Pin)
Development Length for Shear Reinforcement:(ACI 318‐11)
db = 10
Ld =  fy db / 2.1 f'c0.5 (12.2.2)
400 mm

New utilization in shear per anchor: (EN 1993‐1) (ETAG 001)
Uts = V Ed/min( Fb,Rd ;VRd,s)
32%
Anchor of embedded length more than 12d should not consider pryout.
For Tension:

Utilization in tension per anchor: (EN 1993‐1) (ETAG 001)
Utt = Ft,Ed / min( Ft,Rd ; Bp,Rd; NRd,c)
1434%

Extra Tension Reinforcement:(ACI 318‐14)
n (no. of required cross section) = 4 bars
N = (Max. Tension Force/Anchor) 186.4 kN
N = n A Fu Φ (17.4.2.9)
n x π x r2 x Fu Φ
0.5
r = (Tx1000/n x π x Fu Φ)
6.29 mm
Use 2Φ14 Gr.460B (U Shape)
Development Length for Tension Reinforcement:(ACI 318‐14)
db = 14
Ld =  (fy ψt  ψe / 1.4 λ f'c1/2) db (25.4.2.2)
(Where ψt & ψe = 1.0 ) 840 mm
λ = 1 for normal concrete
Hook Development length for Tension Reinforcement:(ACI 318‐14)
db = 14
1/2
Ldh =  (fy ψe ψc  ψr / 4.167 λ f'c ) db (25.4.2.2)
(Where ψe & ψc & ψr = 1.0 ) 282 mm
λ = 1 for normal concrete
Ldh ≥ 8db

New Utilization in tension per anchor: (EN 1993‐1) (ETAG 001)
Utt = Ft,Ed / min( Ft,Rd ; Bp,Rd)
83%
New Interaction of tension and shear: (EN 1993‐1) (ETAG 001)
Utts = (β N )α + (β V )α
93%

You might also like