Scribd
Upload
195 views1 page

HIPASE-E 005-DX-010 Digital Module

The DX-010 module expands the number of digital inputs and outputs of PS-300 and PS-500 boards. It contains 8 bipolar wide range inputs and 8 relay outputs. Each input and output is galvanically isolated. The module operates as soon as the base PS board receives auxiliary voltage and can be fitted to all PS boards up to the maximum number allowed for the device.

Uploaded by

Chi Pham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
195 views1 page

HIPASE-E 005-DX-010 Digital Module

The DX-010 module expands the number of digital inputs and outputs of PS-300 and PS-500 boards. It contains 8 bipolar wide range inputs and 8 relay outputs. Each input and output is galvanically isolated. The module operates as soon as the base PS board receives auxiliary voltage and can be fitted to all PS boards up to the maximum number allowed for the device.

Uploaded by

Chi Pham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

19.

DX-010 Digital Module 8DI, 8DO


The DX-010 module is an extension module for the PS-300 and PS-500 boards. Thus, the number of digital inputs
and outputs of the PS boards can be expanded as needed. The extension module DX-010 is in operation as soon
as the corresponding PS base board itself is supplied with auxiliary voltage. For the maximum number of DX-010 in
the device please refer to Device Features.

Top view of module DX-010

19.1. Features

 8 bipolar wide range inputs with individually by software adjustable switching thresholds and hysteresis
 Every bipolar wide range input supports sensor monitoring for wire break, contact failure or short-circuit
 For each wide-range input switchable Arc Forcing
 Adjustable input debouncing
 All inputs are galvanically isolated from each other
 8 relay outputs with self-monitoring of relay coil and measuring of coil exciting voltage
 Switching cycle counter each relay output
 Adjustable minimum output pulse duration
 All outputs are galvanically isolated from each other
 The relay contacts are triggered monostable
 Can be fitted to all PS boards

DGB-004-1.03 HIPASE Data Sheets Page 211 of 429

You might also like