Scribd Logo
Upload

Welcome to Scribd!

  • 436 views

    Disassembly & Reassembly

    Uploaded by

    Vietmobile Page
    The document provides instructions for performing a level 2 repair on a device. It describes disassembling components like the rear case, battery connectors, front camera, and rear glass. It then explains reassembling these components in reverse order and notes to avoid scratching or damaging parts during the process. Safety gloves and an anti-static mat are among the recommended tools.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Disassembly & Reassembly

    Uploaded by

    Vietmobile Page
    436 views8 pages
    The document provides instructions for performing a level 2 repair on a device. It describes disassembling components like the rear case, battery connectors, front camera, and rear glass. It then explains reassembling these components in reverse order and notes to avoid scratching or damaging parts during the process. Safety gloves and an anti-static mat are among the recommended tools.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for performing a level 2 repair on a device. It describes disassembling components like the rear case, battery connectors, front camera, and rear glass. It then explains reassembling these components in reverse order and notes to avoid scratching or damaging parts during the process. Safety gloves and an anti-static mat are among the recommended tools.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    436 views8 pages

    Disassembly & Reassembly

    Uploaded by

    Vietmobile Page
    The document provides instructions for performing a level 2 repair on a device. It describes disassembling components like the rear case, battery connectors, front camera, and rear glass. It then explains reassembling these components in reverse order and notes to avoid scratching or damaging parts during the process. Safety gloves and an anti-static mat are among the recommended tools.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 8

    7. Level 2 Repair (VIETMOBILE.

    VN)

    7-1. Components on the Rear Case

    Confidential and proprietary-the contents in this service guide subject to change without prior notice
    Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
    7. Level 2 Repair

    7-2. Pre-requisite

    Tweezers / Disass'y Stick / Screw Driver Anti-static Gloves

    Anti-static Mat Hot Plate

    A OCTA Disassembly Holder OCTA Disassembly Upper

    Ethyl Alcohol Cotton Swab

    Confidential and proprietary-the contents in this service guide subject to change without prior notice
    Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
    7. Level 2 Repair

    7-3. Parts which must be changed after repair

    BOM description & part


    KIT code Image Remarks
    code

    Backglass Outside tape

    [GH81-16436A]

    Replace for
    GH82-18798A
    Backglass

    Cam sealing tape

    [GH02-17355A]

    Mic sealing tape

    [GH02-07406A]

    Confidential and proprietary-the contents in this service guide subject to change without prior notice
    Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
    7. Level 2 Repair

    7-4. Disassembly

    1 Put the device in the chamber as following


    below heating condition 2 Detach the Back Glass.
    - SOC 68%↓: 70℃/10~20 minute Detach the left side of Back glass.
    - SOC 68%↑: 60℃/10~20 minute
    ※ Please confirm the heating condition
    released lastly, and follow it.

    ※ Caution ※ Caution
    Be care of scratch. Be care of scratch.

    3 Unscrew 15 Point and disassemble SIM Tray 4 Disassemble Upper Rear.


    from device. (Use disassemble hole left/right side of Rear to
    detach it)

    Rear Top disassemble hole.

    ※ Caution
    ※ Caution
    1) Be care of scratch.
    Be care of Rear damage.
    2) Be care of Rear and connector damage.

    Confidential and proprietary-the contents in this service guide subject to change without prior notice
    Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
    7. Level 2 Repair

    Finally Disassemble Rear of bottom side.


    5 6 Unscrew PBA 3points.
    (Use disassemble hole right side of Rear to
    detach it)

    ※ Caution
    1) Be care of scratch. ※ Caution
    2) Be care of Rear and connector damage. Be careful not to damage the PBA.
    3) Be careful not to damage the PBA.

    7 Battery connect and the other connectors. 8 Detach Ear Jack.


    (5 Point).

    ※ Caution ※ Caution
    1) Be care of scratch. 1) Be care of FPCB damage.
    2) Be care of connector damage. 2) Be care of Ear jack connector.

    Confidential and proprietary-the contents in this service guide subject to change without prior notice
    Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
    7. Level 2 Repair

    9 Detach Front CAM. 10 Detach other components.

    ※ Caution
    ※ Caution
    1) Be care of PBA damage.
    Be care of several kinds of damage.
    2) Be care of Front CAM connector.

    Confidential and proprietary-the contents in this service guide subject to change without prior notice
    Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
    7. Level 2 Repair

    7-5. Assembly

    1 Assemble PBA on Front. 2 Battery connect and the other connectors.


    About 30 degrees will be inserted into the PBA. (5 Point)

    ※ Caution ※ Caution
    Be care of FPCB damage. Be care of FPCB and Y-OCTA damage.

    3 Screw 3 Point s of the PBA 4 Assemble the Bottom REAR in sequence.


    (* Torque value : 1.3kgf)

    ※ Caution ※ Caution
    Be careful not to damage the PBA. Be care of scratch and REAR damage

    Confidential and proprietary-the contents in this service guide subject to change without prior notice
    Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
    7. Level 2 Repair

    5 Assemble the TOP+MID REAR Assy in 6 Screw 15points of the Front. And Insert
    sequence.
    sim tray
    ( * Torque : 1.3 kgf)

    ※ Caution ※ Caution
    Be care of scratch and REAR damage. Be care of scratch and REAR damage.

    Press Back Glass.


    8
    7 Assemble backglass. Pressing force : 1 N
    Pressing time : 1 minute

    ※ Caution ※ Caution
    Be care of scratch and tilt. Be care of scratch.

    Confidential and proprietary-the contents in this service guide subject to change without prior notice
    Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

    You might also like