Scribd
Upload
87 views10 pages

LinPro Printing

The document contains input data for a structural analysis model consisting of two beam members connecting three joints. Distributed loads are applied to the members. The analysis results show displacements, reactions, member forces, and bending moment diagrams for a single load case. Peak bending moments of -10.96 kN-m are found at the supports.

Uploaded by

Anes Besic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views10 pages

LinPro Printing

The document contains input data for a structural analysis model consisting of two beam members connecting three joints. Distributed loads are applied to the members. The analysis results show displacements, reactions, member forces, and bending moment diagrams for a single load case. Peak bending moments of -10.96 kN-m are found at the supports.

Uploaded by

Anes Besic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

LinPro 2.7.

5
File:
Units: kN-m

____________________________________________________________________________
Input Data

Coordinates of joints/supports
Joint X Y Rx Ry Rt SPRING.X SPRING.Y SPRING.ROT CS.ROT
0 0.000 16.000 1 1 0 0.00E+000 0.00E+000 0.00E+000 0.00
1 11.500 16.000 0 1 0 0.00E+000 0.00E+000 0.00E+000 0.00
2 23.000 16.000 0 1 0 0.00E+000 0.00E+000 0.00E+000 0.00

Members
Member Joint I Joint J Type Releases
0: 0 1 TYPE1 111111
1: 1 2 TYPE1 111111

Cross Sections
0: TYPE1
A= 1.000E-02
I= 1.000E-04
E= 200000000.00
alpha= 1.2E-05

Load
0: Distributed Load
Load Case: CASE1
Load Name: Distributed
Coordinate System: Global Y
a= 0.00
b= 11.50 Absolute from Joint I
p1= -0.57
p2= -0.57

1: Distributed Load
Load Case: CASE1
Load Name: Distributed
Coordinate System: Global Y
a= 0.00
b= 11.50 Absolute from Joint I
p1= -0.57
p2= -0.57

2: Distributed Load
Load Case: CASE1
Load Name: Distributed
Coordinate System: Global Y
a= 0.00
b= 11.50 Absolute from Joint I
p1= -19.32
p2= -19.32

3: Distributed Load
Load Case: CASE1
Load Name: Distributed
Coordinate System: Global Y
a= 0.00
b= 11.50 Absolute from Joint I
p1= -19.32
p2= -19.32

4: Distributed Load
Load Case: CASE1
Load Name: Distributed
Coordinate System: Global Y
a= 0.00
b= 11.50 Absolute from Joint I
p1= -0.66
p2= -0.66

5: Distributed Load
Load Case: CASE1
Load Name: Distributed
Coordinate System: Global Y
a= 0.00

LinPro 2.7.5 | Enes Siljak | [email protected] | www.siljak.ba Page 1 of 10


b= 11.50 Absolute from Joint I
p1= -0.66
p2= -0.66

6: Distributed Load
Load Case: CASE1
Load Name: Distributed
Coordinate System: Global Y
a= 0.00
b= 11.50 Absolute from Joint I
p1= -1.06
p2= -1.06

7: Distributed Load
Load Case: CASE1
Load Name: Distributed
Coordinate System: Global Y
a= 0.00
b= 11.50 Absolute from Joint I
p1= -1.06
p2= -1.06

Load Applied on Joints


Joint Applied Loads

Load Applied on Members


Member Applied Loads
0: 4
1: 5

Load Cases
0: CASE1

Load Combinations

Masses

Masses Applied on Joints


Joint Applied Masses

============================================================================
Static Analysis Results
____________________________________________________________________________

____________________________________________________________________________
Load Case: CASE1

Displacements of joints in global CS


Joint X Y phi
0 0.000000 0.000000 -0.001050
1 0.000000 0.000000 0.000000
2 0.000000 0.000000 0.001050

Reactions in global CS
Joint Rx Ry M
0 0.000000 2.859187 0.000000
1 0.000000 9.530625 0.000000
2 0.000000 2.859187 0.000000

Displacements (global CS) and forces (local CS) on members ends


Memb: 0
Joint X Y phi
0 0.000000 0.000000 -0.001050
1 0.000000 0.000000 0.000000
Axial Shear Moment
0 0.000000 -2.859187 0.000000
1 0.000000 4.765313 -10.960219
Memb: 1
Joint X Y phi
1 0.000000 0.000000 0.000000
2 0.000000 0.000000 0.001050
Axial Shear Moment
1 0.000000 -4.765313 -10.960219
2 0.000000 2.859187 0.000000

LinPro 2.7.5 | Enes Siljak | [email protected] | www.siljak.ba Page 2 of 10


Displacements and forces along members in local CS
Memb: 0
d(x) X Y phi
0.000 0.000000 0.000000 -0.001050
1.150 0.000000 -0.001174 -0.000964
2.300 0.000000 -0.002165 -0.000739
3.450 0.000000 -0.002841 -0.000426
4.600 0.000000 -0.003131 -0.000076
5.750 0.000000 -0.003020 0.000263
6.900 0.000000 -0.002551 0.000538
8.050 0.000000 -0.001826 0.000700
9.200 0.000000 -0.001005 0.000697
10.350 0.000000 -0.000304 0.000481
11.500 0.000000 0.000000 0.000000
d(x) Axial Shear Moment
0.000 0.000000 -2.859187 0.000000
1.150 0.000000 -2.096737 2.849657
2.300 0.000000 -1.334287 4.822496
3.450 0.000000 -0.571837 5.918518
4.600 0.000000 0.190613 6.137722
5.750 0.000000 0.953063 5.480109
6.900 0.000000 1.715513 3.945679
8.050 0.000000 2.477963 1.534431
9.200 0.000000 3.240413 -1.753635
10.350 0.000000 4.002863 -5.918518
11.500 0.000000 4.765312 -10.960219
Memb: 1
d(x) X Y phi
0.000 0.000000 0.000000 0.000000
1.150 0.000000 -0.000304 -0.000481
2.300 0.000000 -0.001005 -0.000697
3.450 0.000000 -0.001826 -0.000700
4.600 0.000000 -0.002551 -0.000538
5.750 0.000000 -0.003020 -0.000263
6.900 0.000000 -0.003131 0.000076
8.050 0.000000 -0.002841 0.000426
9.200 0.000000 -0.002165 0.000739
10.350 0.000000 -0.001174 0.000964
11.500 0.000000 0.000000 0.001050
d(x) Axial Shear Moment
0.000 0.000000 -4.765312 -10.960219
1.150 0.000000 -4.002862 -5.918518
2.300 0.000000 -3.240412 -1.753635
3.450 0.000000 -2.477962 1.534431
4.600 0.000000 -1.715512 3.945679
5.750 0.000000 -0.953062 5.480109
6.900 0.000000 -0.190612 6.137723
8.050 0.000000 0.571838 5.918518
9.200 0.000000 1.334288 4.822496
10.350 0.000000 2.096738 2.849657
11.500 0.000000 2.859187 0.000000

LinPro 2.7.5 | Enes Siljak | [email protected] | www.siljak.ba Page 3 of 10


Structure, Load Case: CASE1

0 -0.66 1 -0.66 2
0 1

LinPro 2.7.5 | Enes Siljak | [email protected] | www.siljak.ba Page 4 of 10


Structure, Masses

0 0 1 1 2

LinPro 2.7.5 | Enes Siljak | [email protected] | www.siljak.ba Page 5 of 10


Moment Diagram, Case: CASE1

-10.96

0.00 0.00

6.14 6.14

LinPro 2.7.5 | Enes Siljak | [email protected] | www.siljak.ba Page 6 of 10


Shear Force Diagram, Case: CASE1

4.77
2.86

-2.86
-4.77

LinPro 2.7.5 | Enes Siljak | [email protected] | www.siljak.ba Page 7 of 10


Axial Force Diagram, Case: CASE1

0.00 0.00 0.00

LinPro 2.7.5 | Enes Siljak | [email protected] | www.siljak.ba Page 8 of 10


Reactions, Case: CASE1

0 1 2
2.86

9.53

2.86

LinPro 2.7.5 | Enes Siljak | [email protected] | www.siljak.ba Page 9 of 10


Deformed shape, Case: CASE1

0 1 2

-0.003131 -0.003131

LinPro 2.7.5 | Enes Siljak | [email protected] | www.siljak.ba Page 10 of 10

You might also like