Scribd
Upload
128 views2 pages

UNIVERSAL PROGRAMMABLE SCROLLING INDICATOR - UniScroll2 PDF

The UniScroll2 is a universal scrolling display for elevator floor information. It can handle up to 32 floors and allows editing the display contents for each floor. The display uses three 5x7 dot matrix characters. Two buttons are used to access each floor's content and modify the scrolling direction and operating mode. Technical specifications include a 22VDC power supply and dimensions of 6.5cm x 6.5cm x 2.5cm. The device displays the memory content for the selected floor and scrolls the display according to elevator direction and menu settings. Its menu allows customizing the content and scrolling direction for each floor.

Uploaded by

Khaled Zakaria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
128 views2 pages

UNIVERSAL PROGRAMMABLE SCROLLING INDICATOR - UniScroll2 PDF

The UniScroll2 is a universal scrolling display for elevator floor information. It can handle up to 32 floors and allows editing the display contents for each floor. The display uses three 5x7 dot matrix characters. Two buttons are used to access each floor's content and modify the scrolling direction and operating mode. Technical specifications include a 22VDC power supply and dimensions of 6.5cm x 6.5cm x 2.5cm. The device displays the memory content for the selected floor and scrolls the display according to elevator direction and menu settings. Its menu allows customizing the content and scrolling direction for each floor.

Uploaded by

Khaled Zakaria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

UNIVERSAL PROGRAMMABLE SCROLLING INDICATOR – UniScroll2

1. GENERAL DESCRIPTION
The UniScroll2 is a universal
scrolling display for the
elevator floor information. It
is capable of handling up to
32 floors with the possibility
of editing and modifying the
display contents for each
floor. The display consists of
three dot matrix characters
(5 columns x 7 rows each).
Two push buttons are
provided to access the
display contents of each floor
as well as modify the
scrolling direction and
operating mode.

1.1 TECHNICAL DATA


Supply voltage Board supply: 22vdc +15% -25%
Input active voltage level is:
Inputs 22Vdc for gray code inputs
0Vdc for arrows
Connection Screw type, plug-in connectors
LengthxHeightxWidth= 6.50cmx6.50cmx2.50cm (black box)
Dimensions
LengthxHeightxWidth= 6.50cmx6.50cmx3.20cm (includes red display)

2. FUNCTION DESCRIPTION
The content of the memory corresponding to the floor set by the gray code inputs is displayed (GF, B1, M, 1 ....).
Every change on the floor information inputs triggers the scrolling of the display to reflect the content of the newly
selected floor. The scrolling direction depends on the elevator direction and on the SDi setting.

2.1 MENU DESCRIPTION


FL0
: Memory content to be displayed for this station
FL31
SDi  Scrolls UP when lift is going UP
 Scrolls DOWN when lift is going UP

2.2 HOW TO ACCESS AND USE THE MENU


The memory content of each floor along with the scrolling direction can be modified by following the steps below:
1. Make sure that the display is powered; it should show the memory content of the currently selected station.
2. Press the Next/Inc push button once. The display will show the first floor number for which the memory
th
content can be modified. So “FLX“ is shown which represents the X station.
3. Use the Next/Inc push button to scroll to the desired floor.
4. Press the Select/Ok push button. The display shows the memory content of this floor with the leftmost part
blinking
5. Use the Next/Inc push button to scroll to the desired leftmost digit or character (0…9, blank, -, B, S, G, E,
F, M, L).
6. Press the Select/Ok to save the leftmost part content. The rightmost part starts blinking.
7. Use the Next/Inc push button to scroll to the desired rightmost digit or character (0…9, blank, -, B, S, G, E,
F, M, L).
8. Press the Select/Ok to save the rightmost part content. The floor number is displayed again.

2.3 ENHANCED FEATURES


1. Arrow scrolls when lift is moving. Arrow remains stationary when lift stops on a floor.
2. Three messages are displayed:
a) Maintenance: When elevator is in Maintenance.
b) Wait: When elevator is performing a homing trip.
c) Out of service: When the elevator has a problem.
-2-
3. INSTALLATION & MOUNTING
3.1 INSTALLATION
Connect terminals P and GND to +VBAT and –VBAT of the power supply respectively.
Connect terminals A, B, C, D and E of the uniscroll board directly to A, B, C, D and E of the controller board.
Connect terminals UP and DOWN of the uniscroll board directly to UP and DOWN arrow of the controller
board.

3.2 MOUNTING
• Mounting plate thickness: 0.8mm to 5mm.
• Cutout in mounting plate: 54mmx43mm.
• No need for welded studs (screws).

S. & A. S. LTD
Beirut Office: Headquarters & Factory: Website:
Boutros Building 1st Basement S. & A. S. Building www.sascontrollers.com
Cheikh-el-Ghabi Street Seaside Road
Ghabi Beirut 2068 7808 Jieh Chouf
Lebanon Lebanon Technical Support & Email:
Tel: +961 1 216 994 Tel: +961 7 996 333 Tel: +961 71 996 333
Fax:+961 1 339 600 Fax:+961 7 996 116 [email protected]

You might also like