Scribd
Upload
272 views3 pages

Smart Road Safety and Vehicle Accident Prevention System For Mountain Roads

This document proposes a smart road safety system using sensors to prevent vehicle accidents on dangerous mountain roads. The system uses IR sensors, LED lights, an LCD display, and a buzzer controlled by an Arduino board. When two cars approach an opposite curve, the IR sensors detect the vehicles and the LED lights change to red with an alarm to signal danger. Then one LED turns green to allow one car to pass, followed by the other LED turning green for the second car. This system is intended to prevent accidents on narrow, curved mountain roads where visibility around corners is limited.

Uploaded by

IsraelPerezSanchez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
272 views3 pages

Smart Road Safety and Vehicle Accident Prevention System For Mountain Roads

This document proposes a smart road safety system using sensors to prevent vehicle accidents on dangerous mountain roads. The system uses IR sensors, LED lights, an LCD display, and a buzzer controlled by an Arduino board. When two cars approach an opposite curve, the IR sensors detect the vehicles and the LED lights change to red with an alarm to signal danger. Then one LED turns green to allow one car to pass, followed by the other LED turning green for the second car. This system is intended to prevent accidents on narrow, curved mountain roads where visibility around corners is limited.

Uploaded by

IsraelPerezSanchez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Smart Road Safety and Vehicle Accident Prevention System

for Mountain roads


Growth in population has led to growth in technology. People use car on large
number and number of accidents taking place, is increasing day-by-day. Road accidents are
undoubtedly the most frequent happening cases and overall, the cause of the most damage.
There are many dangerous roads in the world like mountain roads, narrow curve roads, T
roads. Some mountain roads are very narrow and they have many curves. The problems in
these curve roads is that the drivers are not able to see the vehicle or obstacles coming from
another end of the curve. If the vehicle is in great speed then it is difficult to control and
there are chances of falling off a cliff. Hence there is a need of many road safety systems.
To avoid these problems in curve roads of mountain areas, we have proposed this vehicle
accident prevention system. This accident prevention system using sensors is powered by
Arduino board, it consists of IR sensors, LED lights, LCD display and buzzer. When two
cars pass from the opposite side of a mountain curve the IR sensor senses the car and LED
colour changes to red and raises the buzzer giving signal of danger and then it changes one
LED colour into green to allow the one car to pass and then the other LED colour turns
green. In this way we can prevent the accidents of curved road.

Block Diagram:
 Hardware Specifications

 
 Arduino

 
 
 Crystal Oscillator

 
 Resistors

 
 Capacitors

 
 Transistors

 
 Cables and Connectors

 
 Diodes

 
 PCB and Breadboards
 
 LED

 
 Transformer/Adapter

 
 Push Buttons

 
 Switch

 
 IC

 
 IC Sockets

You might also like