SERVICE MANUAL

Copier

SF-2530N/2540N
MODEL SF-D20/21/23/24
[Note] The SF2530N/2540N is a New CE conforming model of the SF2530/2540.
This Service Manual describes only the different points from the SF2530/2540. For the common points with the
SF2530/2540, please refer to the SF2530/2540 Service Manual and the SF2030/2040 Service Manual.

CONTENTS

[ 1 ] PRODUCT OUTLINE .............................................................................. 1

[ 2 ] PRODUCT SPECIFICATIONS................................................................ 1

[ 3 ] OPTIONS SPECIFICATIONS ................................................................. 1

[ 4 ] COMPONENT IDENTIFICATION ........................................................... 1

[ 5 ] INSTALLATION....................................................................................... 1

[ 6 ] DISASSEMBLY AND REASSEMBLY .....Common with the SF2530/2540

[ 7 ] ADJUSTMENTS......................................Common with the SF2530/2540

[ 8 ] SIMULATION AND DIAGNOSTICS ........Common with the SF2530/2540

[ 9 ] MAINTENANCE AND OTHERS..............Common with the SF2530/2540

[ 10 ] ELECTRICAL SECTION ......................................................................... 4

Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.

This document has been published to be used

SHARP CORPORATION for after sales service only.
The contents are subject to change without notice.
[1] PRODUCT OUTLINE [4] DRAWINGS
The product name of the SF2530 is changed to the SF2530N, and the
SF2540 to the SF2540N.
7. Basic unit list
Sub control PWB added

[2] SPECIFICATIONS AC Sub control PWB added

DH relay PWB added
(5) Warm-up time
SF2530 SF2530N SF2540 SF2530N
About 60sec About 75sec About 100sec About 115sec

(24) External view

W633 x D683 x H567 (mm)(Glass top)
W633 x D683 x H607 (mm)(OC top)
Weight
Body: About 70kg
Paper feed module: About 3.9kg
OC cover: About 1.9kg

2 6 10 3 19 12 11 5 7 1

4
20

18

15 17
16
13

■ Loosen the five screws A which secure the rear exterior cover
[5] INSTALLATION attached to the rear cabinet panel of the copier.
Then, remove the two screws B and slide the rear exterior cover
B-(5) SF-D23 up to remove it.
Installing procedures 3, 4, and 5 are changed as follows. Procedures · Lšsen Sie die fŸnf Schrauben A, mit denen die hintere Au§enab-
1, 2, 6 and later remain unchanged. deckung an der hinteren GehŠuseverkleidung des Kopierers be-
festigt ist.
Entfernen Sie dann die zwei Schrauben B, und schieben Sie die
hintere Au§enabdeckung nach oben, um sie abzunehmen.
n 3. Remove the rear exterior cover of the
copier.
· 3. Entfernen Sie die hintere
Au§enabdeckung des Kopierers.
 Screw A Screw A n 5. Reattach the rear exterior cover of the
Schraube A Schraube A
copier.
· 5. Bringen Sie die hintere
Screw B
Schraube B
Screw B
Auenabdeckung des Kopierers wieder
Schraube B an.
■ Reattach the rear exterior cover which has been removed in step
3 to its original position, secure it with the two screws B, and
Screw A tighten the five screws A which have been loosened to secure
Schraube A the cover.
· Bringen Sie die hintere Au§enabdeckung, die in Schritt 3 ab-
Rear exterior cover Screw A genommen wurde, wieder an ihrer ursprŸnglichen Position mit
hintere Au§enabdeckung Schraube A
den zwei Schrauben B an, und ziehen Sie die fŸnf Schrauben A
fest, die zum Anbringen der Abdeckung gelšst wurden.

n 4.
Screw A Screw A
Connect the desk relay harness. Schraube A Schraube A

· 4. Anschlie§en des
Untertisch-Relaiskabelbaums Screw B
Schraube B
■ <1> Remove the 14-pin connector desk relay harness from the Screw B
Schraube B
wire saddle which bundles the desk relay harness.
<2> Remove the screw at the connector connection portion and
remove the cover.
<3> Remove the temporary connector which is attached to the Screw A
14-pin connector of the desk relay harness and connect the 14- Schraube A
pin connector to the connector on the desk.
The removed temporary connector will no longer be used. Rear exterior cover Screw A

· <1> Nehmen Sie den Untertisch-Relaiskabelbaum mit dem

hintere Au§enabdeckung Schraube A

14pol. Steckverbinder aus der Halterung, in der der Untertisch-

Relaiskabelbaum befestigt ist.
SF-D20/21/24
<2> Entfernen Sie dann die Schraube am Steckverbinder-An-
schlu§teil, und nehmen Sie die Abdeckung ab. Installing procedure 3 is changed as follows. Procedures 1, 2, 4 and
<3> Entfernen Sie den provisorische Verbinder, der am 14pol. later remain unchanged.
Steckverbinder des Untertisch-Relaiskabelbaums vorhanden ist,
und schlie§en Sie den 14pol. Steckverbinder an den Anschlu§
am Untertisch an.
n 3. Branchez le faisceau de relais de
Der abgenommene provisorische Verbinder wird nicht mehr
benotigt. meuble.

Cover
· 3. Conecte el manojo de cables del
Abdeckung
mueble.
■ <1> Desserrez les cinq vis A qui fixent le cache ext rieur arri re fix
au panneau du compartiment arri re du copieur.
Ensuite, retirez les deux vis B et faites glisser le cache ext rieur
arri re vers le haut pour le retirer.
14-pin connector
14pol. Steckverbinder · <1> Afloje los cinco tornillos A y asegure la cubierta exterior
Screw Wire saddle Relay harness trasera instalada en el panel trasero de la copiadora.
Schraube Halterung Relais-Kabelbaum A continuacin, saque los dos tornillos B y deslice la cubierta
exterior trasera hacia arriba para sacarlos.

14-pin connector
14pol. Steckverbinder
Temporary
Connector of desk connector
Anschlus des Untertisches provisorischer
Verbinder
 Vis A Vis A Vis A Vis A
Tornillo A Tornillo A Tornillo A Tornillo A

Vis B
Vis B
Tornillo B
Tornillo B
Vis B Vis B
Tornillo B Tornillo B

Vis A
Vis A Tornillo A
Tornillo A

Cache ext rieur arriere Vis A

Cache ext rieur arri re Vis A
Cubierta exterior trasera Tornillo A
Cubierta exterior trasera Tornillo A

■ <2> Retirez le connecteur * 14 broches du faisceau de relais de

meuble du serre-fils qui attache le faisceau du relais de meuble.
Ensuite, retirez la vis de la partie de connexion du connecteur et
retirez le cache.
· <2> Saque el manojo de cables del rel de mueble con conector
de 14 clavijas, de la abrazadera que mantiene unido el manojo
de cables del rel del mueble.
A continuacin, saque el tornillo en la parte de conexin del conec-
tor y saque la cubierta.

Cache
Cubierta

Connecteur ˆ 14 broches
Conector de 14 clavijas
Vis Serre-fils Faisceau de relais
Tornillo Abrazadera de cable Manojo de cables del rel

■ <3> Retirez le connecteur temporaire qui est fix au connecteur *

14 broches du faisceau de relais de meuble et branchez le con-
necteur * 14 broches au connecteur du meuble.
Le connecteur temporaire retir ne sera plus r utilis.
· <3> Saque el conector provisorio instalado en el conector de 14
clavijas en el manojo de cables del rel del mueble y conecte el
conector de 14 clavijas en el conector en el mueble.
El conector provisorio sacado no se puede volver a utilizar.

Connecteur ˆ 14 broches
Conector de 14 clavijas Connecteur
temporaire
Connecteur du meuble Conector
Conector del mueble provisorio

■ <4> Remettez le cache ext rieur arri re qui a t retir lors de l’ tape
<1> * sa position d’origine, fixez-le avec les deux vis B, et resser-
rez les cinq vis A qui ont t desserrees pour fixer le cache.
· <4> Vuelva a montar la cubierta exterior trasera sacada en el
paso <1> a su posici—n original, asegure con los dos tornillos B
y apriete los cinco tornillos A aflojados para asegurar la cubierta.
 8 7 6 5 4 3 2 1
[10] ELECTRICAL SECTION
1. BLOCK DIAGRAM

D D

C C

B B

A A

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
2. AC/DC POWER SECTION BLOCK DIAGRAM
RY101

+24V MAIN CONTROL

FW

*3 GND
DHR PWB
D 3P ORT 5V
D
TERMINAL
10V
L
-20V

24V
N F704
NOISE FILTER2 NOISE FILTER MAIN SWITCH
24V1 CONTROL
*4
F705
24V2
CFM CONTROL
F706
LCD CONTROL SFM
24V3
LM CONTROL
DH1
MBM
PAM1
LCD PAM2

TD202 TD201
AC PWB AC PWB F707
24V4 INVERTER VFM1,2

TD202 TD201
*1
C GND
C
REACTOR RESISTER
*2
5A 100mH 56J 192°C 38V
F702
AC SUB AC SUB
PWB 38V1
PWB
CONTROL
F703
38V2
*5 *5
POWER
MIRROR TRANSISTOR

MOTOR

GND

38V
AC CONTROL
CONTROL
RY202
MAIN
THERMOSTAT CLTF 105°C
MOTOR

CONTROL
B DC POWER SUPPLY B
CONTROL
CL COIL

CSWF CSWL

HEATER LAMP COPY LAMP

DVFM HIGH CONTROL

*4 VOLTAGE
UNIT
*3 *3
*1

MAIN
CONTROL
CONTROL PWB
24V
GND CONTROL LUM
LUM
24V1 24V2 24V3 24V4 38V1 38V2
1,2
CONTROL
WOOD PECKER PLUS 5A/125V 3A/125V 3A/125V 3A/125V 5A/125V 3A/250V
(EX100V) RY201
SEAGULL PLUS CONTROL
3A/250V 5A/125V 3A/250V 3A/250V 5A/125V
A (EX100V) A
WOOD PECKER PLUS 3.15A/250V 3.15A/250V 3.15A/250V 3.15A/250V 5A/250V 3.15A/250V
(200V)

SEAGULL PLUS GND

3.15A/250V 3.15A/250V 3.15A/250V 3.15A/250V 5A/250V
(200V)

AC
*1 SEAGULL PLUS ONLY *3 200V ONLY *5 WEST AFRICA, EUROPE ONLY
CONTROL
*2 WOODPECKER PLUS ONLY *4 TAIWAN ONLY

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
3. CIRCUIT
(1) AC PWB CIRCUIT DIAGRAM (200V SERIES)

D 270KJ
D
1.0µF
0.47µF

10KJ 3W
x2 series

ACL
CN204
(#187 Tab)
G4W-1112P-VD

412KF

S1WB80S

C C
0.1µF +120Ω
M16661P-LF

200J 1/2W S21ME3FY

S21MD3VY

0.1µF
+120Ω 200J
1/2W

7mH 1.5A

B B

A A

G4W-2212P
-FD-VD

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
(2) SUB CONTROL PWB

R1
CLPWM_OUT
CN1-1 +5V
200J 1/2W
10K
D 2.2K
+5V
D
Q1
DTA123YK R5
10KJ

CL-Tr2 R2
CN1-2 +5V
200J 1/2W CESEL
CN2-1
10K
GND
2.2K CN2-2

Q2
DTA123YK

HL-Tr1
CN1-3 +5V
R3 R26 R21 R17
10KJ 10KJ 10KJ
200J 1/2W 10K R27 R23 R19 R14
+5V 10KJ 10KJ 10KJ 10KJ
2.2K +5V
16 1 C8 +
O1 I1 C7
15 2 R16 R13 47uF10V +5V
O2 I2 22000pF
14 O3 I3 3
13 4 10KJ 10KJ
Q3 O4 I4
12 O5 I5 5
DTA123YK 11 6 IC3
O6 I6
10 7 VCC1 100
O7 I7 VCC PA7/TP7/ TIOCB2/A20
9 8 2 99
SK G TIOCA3/TP8/PB0 PA6/TP6/ TIOCA2/A21
3

3 TIOCB3/TP9/PB1 PA5/TP5/ TIOCB1/A22 98 CL

HL-Tr2 4 97
C CN1-4 +5V IC1 TD62504 TIOCA4/TP10/PB2 PA4/TP4/ TIOCA1/A23 C
EX1 5 96 R29
R4 IC2A TIOCB4/TP11/PB3 PA3/TP3/ TIOCB0/TCLKD 10KJ
6 TOCXA4/TP12/PB4 PA2/TP2/ TIOCA0/TCLKC 95 D2
200J 1/2W 10K 1 7 94 R28
3 TOCXB4/TP13/PB5 PA1/TP1/ TEND1/TCLKB 10KJ DAN202K
8 DREQ0/TP14/PB6 PA0/TP0/ TEND0/TCLKA 93
2 9 92 GND
2.2K ADTRG/DREQ1 TP15/PB7 VSS
2
1

/RESO 10 RESO 91 /CS0

GND 11 P84/CS0
74AC08 VSS P83/CS1/IRQ3 90 /CLPWM
12 TXD0/P90 89 /FWS
P82/CS2/IRQ2 NOT USE
Q4 13 TXD1/P91 88
IC2B P81/CS3/RAS/IRQ1
14 RXD0/P92 87
DTA123YK 4 P80/RFSH/IRQ0
15 RXD1/P93 86 GND
6 AVSS 16 1 HL_IN2
HL1 16 IRQ4/SCK0/P94 85 O1 I1 CN3-17
5 P77/AN7/DA1 15 2
HL2 17 IRQ5/SCK1/P95 84 O2 I2
P76/AN6/DA0 CLPWM_IN
18 D0/P40 83 /HL2 14 O3 I3 3 CN3-9
P75/AN5 13 4 FW_IN
74AC08 19 D1/P41 82 CESEL O4 I4 CN3-11
P74/AN4 12 5 HL_IN
20 D2/P42 81 /HL O5 I5 CN3-10
P73/AN3 11 6 /MM_IN
21 D3/P43 80 MM O6 I6 CN3-13
GND_ACMAIN P72/AN2 STRES_IN
CN1-5 GND 22 VSS 79 10 O7 I7 7 CN3-15
P71/AN1 9 8
23 D4/P44 78 SK G
P70/AN0
24 D5/P45 77 VREF
2
1

VREF
25 D6/P46 76 AVCC +5V
AVCC C9 IC5 TD62504
26 D7/P47 75 MD2 223Z
GND_ACSUB D0 27 MD2
CN1-6 D8/P30 74 MD1 R24 D1
MD1 10KJ C10
D1 28 D9/P31 73 MD0 R22 223Z
MD0 DAP202K FW_OUT
D2 29 D10/P32 72 /LWR 10KJ CN3-12
P66/LWR
D3 30 D11/P33 71 /HWR R18
P65/HWR /MM_OUT
D4 31 D12/P34 70 /RD R20 10KJ CN3-14
P64/RD R25
3

D5 32 D13/P35 69 /AS
+5V P63/AS 0J STRES_OUT
D6 33 D14/P36 68 VCC CN3-16
VCC
D7 34 D15/P37 67 XTAL 10KJ C6
CN3 XTAL NOT USE
VCC 35 VCC 66 EXTAL
EXTAL 22000pF
36 A0/P10 65 GND
VSS
37 A1/P11 64 NMI
+5V +5V NMI
38 A2/P12 63 /RESET R11 10KJ
1 2 RES
39 A3/P13 62 /STBY R12
+5V +5V STBY 10KJ IC2C
40 A4/P14 61 S-CLK
3 4 S-CLK 9
41 A5/P15 P62/BACK 60
GND GND 42 59 R9 8 3
5 6 A6/P16 P61/BREQ 10KJ +5V 10
GND 43 A7/P17 58
GND GND P60/WAIT
44 VSS 57 GND
7 8 VSS DAN202K
B 45 A8/P20 P53/A19 56 A19 74AC08 B
CLPWM_IN HL_IN 46 55 A18 IC2
9 10 C2 A9/P21 P52/A18
22000pF 47 A10/P22 54 A17
FW_IN FW_OUT P51/A17
48 A11/P23 53 A16 2 1
11 12 P50/A16 C1
49 A12/P24 P27/A15 52
/MM_IN /MM_OUT 50 51 R10 10KJ 22000pF IC2D
13 14 A13/P25 P26/A14 12
R7 10KJ
STRES_IN STRES_OUT R8 10KJ 11 3
15 16 H8/3041
R6 10KJ 13
HL_IN2 NC
17 18 +5V R15 DAP202K
200J 74AC08
B18B-PHDSS-B C3
22000pF X1
IC4 8MHz 2 1
A15 1 A15 28
A12 Vcc A14 C4 C5
2 A12 27
A7 A14 A13 22pF 22pF
3 A7 26
CN1 A6 4 A13 25 A8
A6 A8
A5 5 A5 24 A9
A4 6 A9 23 A11
CLPWM_OUT A4 A11
1 A3 7 A3 22 /OE
A2 8 OE 21 A10
CL-Tr2 A2 A10
2 A1 9 A1 20 /CS0
A0 10 CE 19 D7
HL-Tr1 A0 D7
3 D0 11 D0 18 D6
D1 12 D6 17 D5
HL-Tr2 D1 D5
4 D2 13 D2 16 D4
14 D4 15 D3
GND_ACMAIN GND D3 +5V
5

6 GND_ACSUB 27C512
+5V
+5V TP1 +5V
B6B-PH-K-S CN3-1 CN3-2
+5V +5V
CN3-3 CN3-4

+ C12
C11
100uF10V 22000pF
CN2
A A
1 CESEL
GND
2 GND GND GND
CN3-5 CN3-6
GND TP2 GND
B2B-PH-K-S CN3-7 CN3-8

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
(3) AC SUB POWER SECTION

PRIMARY SECONDARY
D D

CL L IN
CN202-1

R201
CL L1 OUT 100J 1/2W
RESISTOR CN202-2

T1 G
CL L1 IN
CN202-5 6 1 CL2 CN201-1
TD201
T2
M1661S

CR201 R202 4
CL L2 OUT 200J 1/2W SSR201 2
0.1uF+120J S21MD3VY
CL CN202-6
HLTS1

C GND2 CN201-2 C
AC L IN
CN202-4

R203
100J 1/2W C201
T1 G 0.1uF

1 HL2 CN201-3
6
T2 TD202
M1661P 4
CR202 R204
HL L OUT SSR202 2
0.1uF+120J 200J 1/2W
S21MD3VY
HL CN204
HLTS2

HL L OUT
CN203-2
TRANS

HL L IN
CN203-1

B B
CN202-8

CN202 CN203 CN204 CN201

B08P-XL B02P-XL #250 tab terminal B04B-XASK-1

1 CL L IN 1 HL L IN 1 HL L OUT 1 CL2
2 CL L1 OUT 2 HL L OUT 2 GND
3 NC 3 HL2
4 AC L IN 4 NC
5 CL L1 IN
6 CL L2 OUT
7 NC
8 HL L IN

A A

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
4. WIRUNG CHART (1) AC POWER SECTION (EX200V ONLY) 1/2 (SF-2530N)
DHR PWB
BK
L(DH) 1
BK 4Pin
AC L OUT 3
4 L(DH) 4
PL
DHRY 1 3 AC L OUT 3
RD
24V(DHRY) 3 2 HLL 2
1 CLL2 1
D D
8Pin DRAWER
BK WH THRMO
1 HLL 1 C HLL HL
CL 3Pin WH WH STAT
5 HLN 5
BK LB WH
CLTF 1 CLL 2 1 3 RTH 3
WH CN202 #250 GY WH
3 CLN 3 BK 7 GND(RTH) 7 D HLN
8 HLL HLL OUT
BK SUB AC PWB
4 ACL 2Pin
BK BK
#250 6 CLL2 OUT HLL 1
BK BK REACTOR
RESISTER CLL1 IN 5 CLL1 IN HLL IN 2
BK
CLL1 OUT 2 CLL1 OUT 4Pin
BK
1 CLL CL-TR2 1 1 RTH
8Pin HL-TR2 3 2 GND(RTH) RTH
4 GND(RTH) 4
GND 2
3 RTH 3
4Pin

9Pin
BK BK CN202
5 L(DH) 5 CN-I
WH WH 2 HLL
6 N(DH) 6 GY
BK BK 1 CLL 25 GND(RTH)
3 AC L IN 3 CN203 LB
WH WH CN201 23 RTH
C 3 AC N IN 3 7 AC N IN 7 GY C
WH BK BK GND(AC) 12 9 GND(AC)
1 AC N OUT 1 1 AC L OUT 1 1 AC N IN PL
WH WH CL-CLK 9 7 CL-CLK
2 AC N OUT 2 4 AC L IN LB
WH WH RY201 -MMR 8 5 -MMR
4 HLN 4 2 CLN RD
24V(AC) 14 13 24V(AC)
PK
HL 16 15 -HL
6 DCPS N
RD-PK CSWL OUT 11
REACTOR 5 8 DCPS L BR
MSW BL-RD PR 15 11 PR
6 8Pin
16Pin 19 DHRY
RD-BK BL-BK
3 4 AC L 21 24V(DHRY)
PL
CN204
RD-WH BL-WH
AC CIRCUIT PWB 1 CL PWM 6Pin 18Pin
1 2 PL
2 CL-TR2 CL PWM 9
PK
3 HL-TR1 -HL 10 MAIN CONTROL
AC L OUT PK
4 HL-TR2 SUB
AC N OUT GY PWB
6 GND CONTROL PWB

CN701 CN-L
WH CN702
5 DCPS N 1 CSWL OUT
BK BL
2 DCPS L 5V 1 15 5V
GY
B 5Pin GND 9 14 GND B
BL
5V 2 17 5V
GY
GND 11 16 GND
OR
10V1 12 11 10V1
GY
GND 8 12 GND
OR
3 N(DH) 3 10V2 10 13 10V2
DH1 GY
1 L(DH) 1 GND(Mir.M) 17 20 GND(Mir.M)
RD
3Pin 24V 29 7 24V
GY
GND(HVT) 13 18 GND(HVT)
RD
24V 30 9 24V
PL
38V(MIR) 20 6 38V(MIR)
PLUG L LB
N.F FW 16 8 FW
PLUG N BR
-20V 6 10 -20V
GND RD
24V(MIR) 26 5 24V(MIR)
BL
DCPS 5V 3 19 5V
30Pin CN-M
RD
1 24V(MSW) 1 8 24V
PK
2 MSWRES 2 7 MSWRES

A A

1 5V 18Pin 5V 2
5 GND GND 6
3 5V SUB 5V 4
7 GND CONTROL GND 8
11 FW PWB FW 12

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
(2) AC POWER SECTION (EX200V ONLY) 2/2 (SF-2540N)
DHR PWB
BK
L(DH) 1
BK 4Pin
AC L OUT 3
4 L(DH) 4
PL
DHRY 1 3 AC L OUT 3
RD 2 2
24V(DHRY) 3 HLL
1 CLL2 1
D D
8Pin DRAWER
BK WH THRMO
4 HLL 4 D HLL HL
CL 3Pin WH WH STAT
1 HLN 1
BK LB WH
CLTF 1 CLL 2 1 3 RTH 3
WH CN202 #250 GY WH
3 CLN 3 BK 7 GND(RTH) 7 C HLN
8 HLL HLL OUT
BK SUB AC PWB
4 ACL 2Pin
BK BK
#250 6 CLL2 OUT HLL 1
BK BK REACTOR
RESISTER CLL1 IN 5 CLL1 IN HLL IN 2
BK
CLL1 OUT 2 CLL1 OUT 4Pin
BK
1 CLL CL-TR2 1 1 RTH
HL-TR2 3 2 GND(RTH) RTH
8Pin 4 GND(RTH) 4
GND 2
3 RTH 3
4Pin

9Pin
BK BK CN202
5 L(DH) 5 CN-I
WH WH 2 HLL
6 N(DH) 6 GY
BK BK 1 CLL 25 GND(RTH)
3 AC L IN 3 CN203 LB
C WH WH CN201 23 RTH C
2 AC N IN 2 7 AC N IN 7 GY
WH BK BK GND(AC) 12 9 GND(AC)
1 AC N OUT 1 1 AC L OUT 1 1 AC N IN PL
WH WH CL-CLK 9 7 CL-CLK
2 AC N OUT 2 4 AC L IN LB
WH WH RY201 -MMR 8 5 -MMR
4 HLN 4 2 CLN RD
24V(AC) 14 13 24V(AC)
PK
HL 16 15 -HL
6 DCPS N
RD-PK CSWL OUT 11
REACTOR 5 8 DCPS L BR
MSW BL-RD PR 15 11 PR
6 8Pin
16Pin 19 DHRY
RD-BK BL-BK
3 4 AC L 21 24V(DHRY)
PL
CN204 AC CIRCUIT PWB
RD-WH BL-WH 1 CL PWM 6Pin 18Pin
1 2 PL
2 CL-TR2 CL PWM 9
PK
3 HL-TR1 -HL 10 MAIN CONTROL
AC L OUT PK
4 HL-TR2 SUB PWB
AC N OUT GY
6 GND CONTROL PWB

CN701 CN-L
WH
4 DCPS N CN702 1 CSWL OUT
BK BL
1 DCPS L 5V 1 15 5V
B GY B
GND 9 14 GND
4Pin BL
5V 2 17 5V
GY
GND 11 16 GND
OR
10V1 12 11 10V1
GY
GND 8 12 GND
OR
3 N(DH) 3 10V2 10 13 10V2
DH1 GY
1 L(DH) 1 GND(Mir.M) 17 20 GND(Mir.M)
RD
3Pin 24V 29 7 24V
GY
GND(HVT) 13 18 GND(HVT)
RD
24V 30 9 24V
PL
38V(MIR) 20 6 38V(MIR)
PLUG L LB
N.F FW 16 8 FW
PLUG N BR
-20V 6 10 -20V
GND RD
24V(MIR) 26 5 24V(MIR)
BL
DCPS 5V 3 19 5V
30Pin CN-M
RD
1 24V(MSW) 1 8 24V
PK
2 MSWRES 2 7 MSWRES

A A

1 5V 18Pin 5V 2
5 GND GND 6
3 5V SUB 5V 4
7 GND CONTROL GND 8
11 FW PWB FW 12

8 7 6 5 4 3 2 1
 8 6 7 5 4 3 2 1
(3) AC POWER SECTION OPTICAL AND OPERATION 1/2 (SF-2530N)

GY
F-GND 11 7 F-GND 7 OPTION
D CN102 GY D
GND(AUD) 5 9 GND(AUD) 9 AUDITOR UNIT RD
BL 2 24V(MC) 2
5V(AUD) 4 8 5V(AUD) 8 BL MC
LB 1 -MC 1
-AUD0 6 5 -AUD0 5
PK
-AUDRD 7 4 -AUDRD 4 OPTION
BR
-AUDCL 8 3 -AUDCL 3
PL
-AUDCP 9 2 -AUDCP 2
LB COUNTER UNIT
-PNC 10 1 -PNC 1
RD OPTION
24V(AUD) 3 10 24V(AUD) 10
RD
24V(MC) 2
BL
-MC 1 RD
GY 26 CSWF 26 1 CSWF 1
F-GND 12 RD CSWF
22 24V(CSWF) 22 3 24V(CSWF) 3
26Pin
CN-D RD
CSWF IN 21
RD
24V(CSWF) 17 1 CSWF 1
CN101 RD CSWL
CSWF OUT 24 3 CSWL 3
GY CN-A RD
OP-CLK 6 6 OP-CLK CSWL IN 28
GY
OP-DATA 5 5 OP-DATA
GY
OP-BEO 4 4 OP-BEO 1 -MBMT0 1
GY
OP-LATCH 3 3 OP-LATCH 2 -MBMT1 2
RD
C -KEY-IN 1 1 -KEY-IN CN-B PL 3 -MBMT2 3 C
OP PWB GY -MBMT0 8 MBM
-AUDCL 20 20 -AUDCL LB 4 -MBMT3 4
GY -MBMT1 10
-PNC 19 19 -PNC BR 5 24V(MBMT) 5
GY -MBMT2 12
-AUDD 18 18 -AUDD PK 6 24V(MBMT) 6
GY -MBMT3 14
-AUDCP 17 17 -AUDCP RD
GY 24V(MBMT) 16
GND 16 16 GND RD
GY 24V(MBMT) 18
-AUDRD 15 15 -AUDRD GY GY 1 GND(AES)
GY GND(AES) 2 1 GND(AES) 1
GND 14 14 GND PK PK 2 AES AE PWB
GY AES 4 2 AES 2
5V 13 13 5V OR OR 3 10V1(AES)
GY 10V1(AES) 6 3 10V1(AES) 3
GND 12 12 GND GY GY
GY GND(MBHPS) 13 4 GND(MBHPS) 4
5V 11 11 5V LB LB
GY MBHPS 15 5 MBHPS 5 1 GND(MBHPS)
10V1 10 10 10V1 BL BL
GY 5V(MBHPS) 17 6 5V(MBHPS) 6 2 MBHPS MBHPS
-MC 9 9 -MC PL PL
GY -LEMT0 1 7 -LEMT0 7 3 5V(MBHPS)
24V 8 8 24V BR BR
-LEMT1 3 8 -LEMT1 8
PK PK
RD CN-E -LEMT2 5 9 -LEMT2 9
15 24V(ORS) LB LB 1 -MBMT0 1
RD PL -LEMT3 7 10 -LEMT3 10
24V(ORS) 1 24V(ORS) 1 13 -LED0 RD RD 2 -MBMT1 2
PL LB 24V(LEMT) 9 11 24V(LEMT) 11
LED0 2 -LED0 2 11 -LED1 RD RD 3 -MBMT2 3
LB 24V(LEMT) 11 12 24V(LEMT) 12 LM
LED1 3 -LED1 3 LB LB 4 -MBMT3 4
GY PDSEL2 21 13 PDSEL2 13
F-GND PK PK 5 24V(LEMT) 5
PDSEL1 22 14 PDSEL1 14
ORS LED BR BR 6 24V(LEMT) 6
B PDSEL0 19 15 PDSEL0 15 B
PWB BL BL
5V(PDSEL) 29 16 5V(PDSEL) 16
PL PL
PD 20 17 PD 17
GY GY
GND(PD) 32 18 GND(PD) 18
GY
GND(LHPS) 26 19 GND(LHPS) 19
PL
LHPS 24 20 LHPS 20
GY CN-D BL
10 GND 10 4 GND(ADF) 5V(LHPS) 23 21 5V(LHPS) 21 1 PDSEL2
RADF PL LB ORS
4 AF-TXD 4 12 AF-TXD -PNCD 25 2 PDSEL1
PK GY 26Pin
6 AF-RXD 6 14 AF-RXD GND(PNC) 28 3 PDSEL0 PD
PL RD
OR 12 AF-DTR 12 6 AF-DTR 24V(PNC) 30 4 5V(PDSEL)
LB PL PWB
8 AF-DSR 8 16 AF-DSR -PNC 27 5 PD
BR
ADF 9 AF-RES 9 18 AF-RES 6 GND(PD)
RD
3 24V 3
BL RD
7 5V 7 9 24V 9
BL
11 P-GND 11 10 5V 10 GY
GY GY GY CN702 MAIN 1 GND(LHPS)
OPTION 5 F-GND 5 12 P-GND 12 PL
GY GY 2 LHPS LHPS
11 S-GND 11 24 24V CONTROL BL
3 5V(LHPS)
5 5V DCPS PWB
19 P-GND
21 S-GND
30Pin 1 -PNCD 1
A PC A
1 GND(PNC) 1

1 24V(PNC) 1
2 -PNC 2 OPTION

8 7 6 5 4 3 2 1
 8 6 7 5 4 3 2 1
(4) AC POWER SECTION OPTICAL AND OPERATION 2/2 (SF-2540N)

GY
7 F-GND 7 AUDITOR UNIT OPTION
CN304 GY
GND(AUD) 3 9 GND(AUD) 9 RD
BL 2 24V(MC) 2
5V(AUD) 2 8 5V(AUD) 8 BL MC
LB 1 -MC 1
D -AUD0 6 5 -AUD0 5 OPTION D
PK
-AUDRD 8 4 -AUDRD 4
BR
-AUDCL 4 3 -AUDCL 3
PL
-AUDCP 7 2 -AUDCP 2 COUNTER UNIT
LB
-PNC 5 1 -PNC 1 OPTION
RD
24V(AUD) 1 10 24V(AUD) 10
RD
24V(MC) 10
BL
-MC 9 RD
26 CSWF 26 1 CSWF 1
RD CSWF
22 24V(CSWF) 22 3 24V(CSWF) 3
26Pin
CN-D RD
CSWF IN 21
CN301 RD
24V(CSWF) 17 1 CSWF 1
GY CN-A RD CSWL
-OP-RXD 20 20 -OP-RXD CSWF OUT 24 3 CSWL 3
GY RD
OP-TXD 19 19 OP-TXD CSWL 28
GY
-OP-DSR 18 18 -OP-DSR
GY
LCD -OP-DTR 17 17 -OP-DTR 1 -MBMT0 1
GY
CONTROL OP-RES 15 15 OP-RES 2 -MBMT1 2
GY CN-B
PWB -AUDCL 14 14 -AUDCL PL 3 -MBMT2 3
GY -MBMT0 8 MBM
-PNC 13 13 -PNC LB 4 -MBMT3 4
GY -MBMT1 10
-AUDD 12 12 -AUDD BR 5 24V(MBMT) 5
C GY -MBMT2 12 C
-AUDCP 11 11 -AUDCP PK 6 24V(MBMT) 6
GY -MBMT3 14
GND 10 10 GND RD
GY 24V(MBMT) 16
-AUDRD 9 9 -AUDRD RD
GY 24V(MBMT) 18
GND 8 8 GND GY GY 1 GND(AES)
GY GND(AES) 2 1 GND(AES) 1
5V 7 7 5V PK PK 2 AES AE PWB
GY AES 4 2 AES 2
GND 6 6 GND OR OR 3 10V1(AES)
GY 10V1(AES) 6 3 10V1(AES) 3
5V 5 5 5V GY GY
GY GND(MBHPS) 13 4 GND(MBHPS) 4
10V1 4 4 10V1 LB LB
GY MBHPS 15 5 MBHPS 5 1 GND(MBHPS)
-MC 3 3 -MC BL BL
GY 5V(MBHPS) 17 6 5V(MBHPS) 6 2 MBHPS MBHPS
24V 2 2 24V PL PL
GY -LEMT0 1 7 -LEMT0 7 3 5V(MBHPS)
-20V 16 16 -20V BR BR
-LEMT1 3 8 -LEMT1 8
PK PK
RD CN-E -LEMT2 5 9 -LEMT2 9
15 24V(ORS) LB LB 1 -MBMT0 1
RD PL -LEMT3 7 10 -LEMT3 10
24V(ORS) 1 24V(ORS) 1 13 -LED0 RD RD 2 -MBMT1 2
PL LB 24V(LEMT) 9 11 24V(LEMT) 11
LED0 2 -LED0 2 11 -LED1 RD RD 3 -MBMT2 3
LB 24V(LEMT) 11 12 24V(LEMT) 12 LM
LED1 3 -LED1 3 LB LB 4 -MBMT3 4
GY PDSEL2 21 13 PDSEL2 13
F-GND PK PK 5 24V(LEMT) 5
PDSEL1 22 14 PDSEL1 14
ORS LED BR BR 6 24V(LEMT) 6
PDSEL0 19 15 PDSEL0 15
PWB BL BL
5V(PDSEL) 29 16 5V(PDSEL) 16
PL PL
PD 20 17 PD 17
B GY GY B
GND(PD) 32 18 GND(PD) 18
GY
GND(LHPS) 26 19 GND(LHPS) 19
PL
LHPS 24 20 LHPS 20
GY CN-D BL
10 GND 10 4 GND(ADF) 5V(LHPS) 23 21 5V(LHPS) 21 1 PDSEL2
RADF GY LB ORS
4 AF-TXD 4 12 AF-TXD -PNCD 25 2 PDSEL1
GY GY 26Pin
6 AF-RXD 6 14 AF-RXD GND(PNC) 28 3 PDSEL0 PD
GY RD
OR 12 AF-DTR 12 6 AF-DTR 24V(PNC) 30 4 5V(PDSEL)
GY PL PWB
8 AF-DSR 8 16 AF-DSR -PNC 27 5 PD
GY
ADF 9 AF-RES 9 18 AF-RES 6 GND(PD)
RD
3 24V 3
BL RD
7 5V 7 9 24V 9
BL
11 P-GND 11 10 5V 10 GY
GY GY GY CN702 MAIN 1 GND(LHPS)
OPTION 5 F-GND 5 12 P-GND 12 PL
GY GY 2 LHPS LHPS
11 S-GND 11 24 24V CONTROL BL
3 5V(LHPS)
5 5V DCPS PWB
19 P-GND
21 S-GND
30Pin 1 -PNCD 1
PC
1 GND(PNC) 1
A A
1 24V(PNC) 1
2 -PNC 2 OPTION

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
(5) DC POWER SECTION LCD DISPLAY SECTION (SF-2540N)

D D

VFT2 4
VFT1 1
CN303
VRB 1 1 VRB
VRA 2 2 VRA
D3 3 3 D3
D2 4 4 D2
D1 5 5 D1
CN2 WH
D0 6 6 D0 VFT2 1
FFC CABLE FFC CABLE WH
-19V LCD 7 7 -19V LCD LCD VFT1 4
GND2 8 8 GND2
LCD UNIT
5V LCD 9 9 5V LCD
INVERTER PL
CN1 24V 1
CP2 10 10 CP2 PWB RD
CCFT 2
CP1 11 11 CP1
S 12 12 S

C C

CN302
GY
F-GND 22

CN301
LB CN302
VR1 17 19 VR1
PK CCFT 1
VR2 18 20 VR2
PK 24V 2
LED17 10 17 LED17 PK
GY VR2 3
F-GND(OP) 21 1 F-GND(OP) LB
PL VR1 4
CCFT 20 22 CCFT PK VR
RD 2 VR2 2 1
24V(INV) 19 21 24V(INV) LB PWB
GY 1 VR1 1 2
GND2 1 10 GND2
OR
10V 2 2 10V
BL
5V 3 3 5V
LCD CONTROL PWB LB
-LED16 4 4 -LED16
PL OPERATION PWB
-KEYIN 5 5 -KEYIN
PK
-LATCH 6 6 -LATCH
LB
CLK 7 7 CLK
B BR B
-BE0 8 8 -BE0
PL
-DATA 9 9 -DATA
BR
-LED1 11 11 -LED1
PL
-LED2 12 12 -LED2
PK
-LED3 13 13 -LED3
LB
-LED4 14 14 -LED4
BR
PTHA 15 15 PTHA
PL
PTHB 16 16 PTHB

A A

8 7 6 5 4 3 2 1
 8 6 5 7 4 3 2 1
(6) DC POWER SECTION MAIN FREME UNIT SECTION 1/2 (SF-2530N)

BIAS FIELD GND

PK
1 TMa 1 9 -DVBIAS2
D TM BR D
2 TMb 2 4 -GBPWM
LB HIGH
3 TMS 3 7 -SHV
GY
4 GND 4 6 -THV VOLTAGE
GY GY
5 F-GND 5 5 -THV-T
RD 8 -DVBIAS1 PWB
1 24V(TCSA) 1
PL 3 -MHV
TCS 2 TCSA 2 1 VFM 1
GY 2 GND(HVT) VFM1
3 GND 3 2 GND 2
1 24V(HVT)

12Pin DRAWER
BL
RD GY CN-D 1 VFM 1 1 VFM 1
4 DVSEL3 4 GY
GY GY RD 2 GND 2 2 GND 2 VFM2
10 GND 10 23 24V(HVT)
PL PL GY CN-D
9 TCSA 9 3 GND(HVT)
RD RD PL
8 24V(TCSA) 8 5 -MHV BL
GY GY PK VFM 1
6 F-GND 6 9 -DVBIAS1 GY
BR LB BR GND(VFM) 2 1 24V(DGS) 1
5 TMS 5 11 -THV-T RD DGS
RD BR OR 24V(DGS) 10 2 -DGS 2
12 TMa 12 13 -THV BL
BL PK BR -DGS 8
11 TMb 11 15 -SHV
RD RD LB
7 BIAS 7 7 -GBPWM
BIAS OUT 2 GND(OCSW)
C RD CN-E 3 -OCSW OCSW C
12 BIAS 12
BL GY 1 5V(OCSW)
1 TMa 1 GND(OCSW) 4
RD PL
2 TMb 2 -OCSW 5
BR BL
7 TMS 7 5V(OCSW) 6
RD BR
8 24V(TCSA) 8 -RE 8 3 -RE
PL CN-C PK MIRROR
9 TCSA 9 HU 10 4 HU
GY BL
10 GND(TCSA) 10 PL HV 12 5 HV MOTOR
RD 28 -DVBIAS2 RD
6 DVSEL3 6 HW 14 6 HW
1 TMa GY PWB
12Pin GND(MIR) 16 7 GND(MIR)
3 TMb PK
U 18 8 U
17 TMS PL
V 20 9 V
19 24V(TCSA) OR
W 22 10 W
21 TCSA BL
5V(MIR) 24 2 5V(MIR)
23 GND(TCSA) BL
5V(MHPS) 21
15 DVSEL3 PL
OR OR OR MHPS 19
10V(BL) 1 3 10V(BL) 3 3 10V(BL) 3 6 10V(BL) GY 1 5V(MHPS)
BR BR BR GND(MHPS) 17
-BL-LATCH 6 16 -BL-LATCH 16 6 -BL-LATCH 6 12 -BL-LATCH RD 2 MHPS MHPS
BL GY GY GY 24V(CFM) 9
GND(BL) 2 15 GND(BL) 15 5 GND(BL) 5 10 GND(BL) BL 3 GND(MHPS)
PK PK PK -CFM 7
PWB BL-DATA 4 17 BL-DATA 17 7 BL-DATA 7 14 BL-DATA
LB LB LB
BL-CLK 3 18 BL-CLK 18 8 BL-CLK 8 16 BL-CLK
PL PL PL 1 24V(CFM) 1
B BL-BE0 7 19 -BL-BE0 19 9 -BL-BE0 9 18 -BL-BE0 CFM B
BL BL BL 2 -CFM 2
5V(BL) 5 14 5V(BL) 14 4 5V(BL) 4 8 5V(BL)
RD RD
2 24V(DL) 2 11 24V(DL) 11 22 24V(DL)
PL PL
RD 13 -DL 13 10 -DL 10 20 -DL
DL 24V(DL) 1 RD RD
PWB -DL PL 1 24V(PSPS) 1 1 24V(PSPS) 1 2 24V(PSPS) CN-K
3 LB LB
12 -PSPS 12 2 -PSPS 2 4 -PSPS
GY GY
20 F-GND 20 18Pin GND(MM) 18 4 GND(MM) 4 4 GND(MM) 4
BL
20Pin DRAWER 5V(MM) 16 3 5V(MM) 3 3 5V(MM) 3
PL
MM-T 22 6 MM-T 6 6 MM-T 6
LB LB MM
-MM 20 5 -MM 5 5 -MM 5
2 P-GND 2 2 P-GND 2
RD
1 24v 1 1 38V 1 1 38V 1
PSPS LB
2 -PSPS 2 13 -MM -MM 14
GY
3 F-GND 3 CN3
MAIN CONTROL PWB SUB CONTROL PWB

AC PWB GY
GND 7
PL CN702
A 38V 1 A
CN203 RD
38V 6 18 38V
GY DCPS
GND 4 15 P-GND
30Pin

8 7 6 5 4 3 2 1
 8 6 5 7 4 3 2 1
(7) DC POWER SECTION MAIN FREME UNIT SECTION 2/2 (SF-2540N)

BIAS FIELD GND

PK
1 TMa 1 9 -DVBIAS2
D TM BR D
2 TMb 2 4 -GBPWM
LB HIGH
3 TMS 3 7 -SHV
GY
4 GND 4 6 -THV VOLTAGE
GY GY
5 F-GND 5 5 -THV-T
RD 8 -DVBIAS1 PWB
1 24V(TCSA) 1
PL 3 -MHV
TCS 2 TCSA 2 1 VFM 1
GY 2 GND(HVT) VFM1
3 GND 3 2 GND 2
1 24V(HVT)

12Pin DRAWER
CN-D BL
RD GY 1 VFM 1 1 VFM 1
3 DVSEL2 3 GY VFM2
GY GY RD 2 GND 2 2 GND 2
10 GND 10 23 24V(HVT)
PL PL GY CN-D
9 TCSA 9 3 GND(HVT)
RD RD PL
8 24V(TCSA) 8 5 -MHV BL
GY GY PK VFM 1
6 F-GND 6 9 -DVBIAS1 GY
BR LB BR GND(VFM) 2 1 24V(DGS) 1
5 TMS 5 11 -THV-T RD DGS
RD BR OR 24V(DGS) 10 2 -DGS 2
12 TMa 12 13 -THV BL
BL PK BR -DGS 8
11 TMb 11 15 -SHV
RD RD LB
7 BIAS 7 7 -GBPWM
BIAS OUT 2 GND(OCSW)
C RD CN-E 3 -OCSW OCSW C
12 BIAS 12
BL GY 1 5V(OCSW)
1 TMa 1 GND(OCSW) 4
RD PL
2 TMb 2 -OCSW 5
BR BL
7 TMS 7 5V(OCSW) 6
RD BR
8 24V(TCSA) 8 -RE 8 3 -RE
PL CN-C PK MIRROR
9 TCSA 9 HU 10 4 HU
GY BL
10 GND(TCSA) 10 PL HV 12 5 HV MOTOR
RD 28 -DVBIAS2 RD
5 DVSEL2 5 HW 14 6 HW
1 TMa GY PWB
12Pin GND(MIR) 16 7 GND(MIR)
3 TMb PK
U 18 8 U
17 TMS PL
V 20 9 V
19 24V(TCSA) OR
W 22 10 W
21 TCSA BL
5V(MIR) 24 2 5V(MIR)
23 GND(TCSA) BL
5V(MHPS) 21
13 DVSEL2 PL
OR OR OR MHPS 19
10V(BL) 1 3 10V(BL) 3 3 10V(BL) 3 6 10V(BL) GY 1 5V(MHPS)
BR BR BR GND(MHPS) 17
-BL-LATCH 6 16 -BL-LATCH 16 6 -BL-LATCH 6 12 -BL-LATCH RD 2 MHPS MHPS
BL GY GY GY 24V(CFM) 9
GND(BL) 2 15 GND(BL) 15 5 GND(BL) 5 10 GND(BL) BL 3 GND(MHPS)
PWB PK PK PK -CFM 7
BL-DATA 4 17 BL-DATA 17 7 BL-DATA 7 14 BL-DATA
LB LB LB
BL-CLK 3 18 BL-CLK 18 8 BL-CLK 8 16 BL-CLK
PL PL PL 1 24V(CFM) 1
B BL-BE0 7 19 -BL-BE0 19 9 -BL-BE0 9 18 -BL-BE0 CFM B
BL BL BL 2 -CFM 2
5V(BL) 5 14 5V(BL) 14 4 5V(BL) 4 8 5V(BL)
RD RD
2 24V(DL) 2 11 24V(DL) 11 22 24V(DL)
PL PL
RD 13 -DL 13 10 -DL 10 20 -DL
DL 24V(DL) 1 RD RD
PWB PL 1 24V(PSPS) 1 1 24V(PSPS) 1 2 24V(PSPS) CN-K
-DL 3 LB LB
12 -PSPS 12 2 -PSPS 2 4 -PSPS
GY GY
20 F-GND 20 18Pin GND(MM) 18 4 GND(MM) 4 4 GND(MM) 4
BL
20Pin DRAWER CN-I 5V(MM) 16 3 5V(MM) 3 3 5V(MM) 3
PL
MM-T 22 6 MM-T 6 6 MM-T 6
LB LB MM
17 DVFM -MM 20 5 -MM 5 5 -MM 5
CN-L 2 P-GND 2 2 P-GND 2
RD
1 24v 1 1 38V 1 1 38V 1
PSPS LB 2 24V(DVFM)
2 -PSPS 2 13 -MM -MM 14
GY
3 F-GND 3 CN3
MAIN CONTROL PWB SUB CONTROL PWB
BL
2 DVFM 2
DVFM RD
1 24V(DVFM) 1
SEAGULL PLUS ONLY

AC PWB GY
GND 7
PL CN702
A 38V 1 A
CN203 RD
38V 4 18 38V
GY DCPS
GND 15 15 P-GND
30Pin

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
(8) DC POWER SECTION PAPER FEEDING/PAPER TRANSPORT

PLS1 GND 1
PLS1 2
5V 3
D D
INCH ONLY
PLS2 GND 1
PLS2 2
5V 3 PAPER FEED

PWB
CN-E
UPPER GY GY
GND(POD2) 3 1 GND(POD2) 5 GND
PL BR
CASSETTE UNIT POD2 2 2 POD2 8 PLS1
BL BL
5V(POD2) 1 3 5V(POD2) 9 5V
GY
POD2 4 GND
12Pin PL
CN-G 7 PLS2
DRAWER CN-B CN-A CN-H BL
RD RD 10 5V
1 24V 1 GY GY
CPFC1 BR BR RD RD GND(PLS) 17 4 GND(PLS) 4 3 GND(PLS)
2 -CPFC1 2 6 24V 6 3 24V 24V 3 5 24V BL BL
BR LB 5V(PLS) 21 6 5V(PLS) 6 11 5V(PLS)
RD RD 11 -CPFC1 11 6 -CPFC1 -CPFC1 5 9 -CPFC1 BR BR
1 24V 1 RD PL PLS 19 5 PLS 5 6 PLS
CPFS1 PK PK 5 24V 5 5 24V -CPFC1 4 7 -CPFS1 OR OR
2 -CPFS1 2 PK GY VAREF(PWS) 11 1 VAREF(PWS) 1 2 VAREF(PWS)
10 -CPFS1 10 4 -CPFS1 GND 13 25 GND PK PK
GY GY GY PL PWS 15 3 PWS 3 1 PWS
1 S-GND 1 9 S-GND 9 11 S-GND -PED1 14 23 -PED1
C PL PL PL BL 6Pin C
LUD1 2 LUD1 2 8 LUD1 8 16 LUD1 5V1 12 27 5V1
BL BL BL PK CN-I
3 5V 3 2 5V 2 17 5V LUD1 11 21 LUD1 TFD
GY PK
GY GY 4 S-GND 4 9 S-GND -LUM1 1 1 -LUM1 BL BL BL
1 S-GND 1 LB OR 5V(TFD) 12 6 5V(TFD) 6 1 5V(TFD) 1 1 5V(TFD)
LB LB 3 -PED1 3 18 -PED1 -PFUND 10 19 -PFUND LB LB LD
PED1 2 -PED2 2 BL LB TFD 14 7 TFD 7 2 TFD 2 2 TFD
BL BL 1 5V 1 15 5V UCSS4 9 17 UCSS4 GY GY GY
3 5V 3 OR PL GND(TFD) 16 8 GND(TFD) 8 3 GND(TFD) 3 3 GND(TFD)
2 -LUM1 UCSS3 8 15 UCSS3 RD RD
GY BR 24V(RRC) 8 4 24V(RRC) 4
1 P-GND UCSS2 7 13 UCSS2 BL BL
1 PK -RRC 10 5 -RRC 5 1 24V(RRC) 1
1 -LUM1 1 UCSS1 6 11 UCSS1 PL PL RRC
LUM1 GY -PSD 2 1 -PSD 1 4 -RRC 4
2 P-GND 2 P-GND 2 3 P-GND BL BL
2 5V(PSD) 6 3 5V(PSD) 3
GY GY
GND(PSD) 4 2 GND(PSD) 2 1 -PSD
LIFT UP MOTER PWB 3 5V(PSD)
2 GND(PSD) PSD

1 GND(PEDMFT)
CN-G
GY 2 PEDMFT
GY 2 GND(PEDMFT) 2
GND(PEDMFT) 3 LB 3 5V(PEDMFT) PEDMFT
LB 3 PEDMFT 3
PEDMFT 5 BL
BL 1 5V(PEDMFT) 1
5V(PEDMFT) 1 RD
RD 4 24V(MPFS) 4 1
24V(MPFS) 7 PL MPFS
LOWER PL 5 -MPFS 5 2
B -MPFS 9 B
OPTION RD
24V(TRCH) 23 1 24V(TRCH) 1
CASSETTE UNIT LB TRSH
-TRCH 25 4 -TRCH 4
RD
24V(TRCL) 27 3 24V(TRCL) 3
PL
12Pin -TRCL 29 2 -TRCL 2 TRCL
BL
DRAWER CN-B CN-A CN-H 5V(PPD1) 18
RD RD GY
1 24V 1 PPD1 20 BL
CPFC2 BR BR RD RD PK 1 5V(PPD1) 1 1 5V(PPD1)
2 -CPFC2 2 6 24V 6 2 24V 24V 3 6 24V GND(PPD1) 22 GY
BR LB BL 2 PPD1 2 2 PPD1
RD RD 11 -CPFC2 11 6 -CPFC2 -CPFC2 5 10 -CPFC2 5V(PPD2) 24 BL PPD1
1 24V 1 RD PL GY 3 GND(PPD1) 3 3 GND(PPD1)
CPFS2 PK PK 5 24V 5 1 24V -CPFS2 4 8 -CPFS2 PPD2 26 BL
2 -CPFS2 2 PK GY BR 4 5V(PPD2) 4
10 -CPFS2 10 4 -CPFS2 GND 13 26 GND GND(PPD2) 28 GY
GY GY GY PL 5 PPD2 5
1 S-GND 1 9 S-GND 9 7 S-GND -PED2 12 24 -PED2 RD 1 5V(PPD2)
PL PL PL BL 6 GND(PPD2) 6
LUD2 2 LUD2 2 8 LUD2 8 10 LUD2 5V1 14 28 5V1 2 PPD2
BL BL BL PK PPD2
3 5V 3 2 5V 2 11 5V LUD2 11 22 LUD2 3 GND(PPD2)
GY PK CN-I
GY GY 4 S-GND 4 8 S-GND -LUM2 1 2 -LUM2
1 S-GND 1 LB GY
LB LB 3 -PED2 3 12 -PED2 P-GND 2 4 P-GND BL BL
PED2 2 -PED2 2 BL LB 5V(PID) 18 1 5V(PID) 1 1 5V(PID)
BL BL 1 5V 1 9 5V LCSS4 9 18 LCSS4 LB LB
3 5V 3 OR PL PID 20 2 PID 2 2 PID
3 -LUM2 LCSS3 8 16 LCSS3 GY GY PID
GY BR GND(PID) 22 3 GND(PID) 3 3 GND(PID)
5 P-GND LCSS2 7 14 LCSS2 RD
1 PK CSWR 24 4 CSWR 4
1 -LUM2 1 LCSS1 6 12 LCSS1 GY
LUM2 GND(CSWR) 26 5 GND(CSWR) 5
2 P-GND 2 RD CSWR
A 2 24V(SFM) 1 A
BL
-SFM 3 CSWR
1 24V(SFM) 1 GND(CSWR)
LIFT UP MOTER PWB 2 -SFM 2

SFM
MAIN CONTROL PWB

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
(9) DC POWER SECTION PAPER FEEDING/PAPER TRANSPORT (SF-2540N)

PLS1 GND 1
PLS1 2
5V 3
D D
INCH ONLY
PLS2 GND 1
PLS2 2
5V 3 PAPER FEED

PWB
CN-E
UPPER GY GY
GND(POD2) 3 PL 1 GND(POD2) 5 GND
BR
CASSETTE UNIT POD2 2 BL 2 POD2 8 PLS1
BL
5V(POD2) 1 3 5V(POD2) 9 5V
GY
POD2 4 GND
12Pin PL
CN-G 7 PLS2
DRAWER CN-B CN-A CN-H BL
RD RD 10 5V
1 24V 1 GY GY
CPFC1 BR BR RD RD GND(PLS) 17 4 GND(PLS) 4 3 GND(PLS)
2 -CPFC1 2 6 24V 6 3 24V 24V 3 5 24V BL BL
BR LB 5V(PLS) 21 6 5V(PLS) 6 11 5V(PLS)
RD RD 11 -CPFC1 11 6 -CPFC1 -CPFC1 5 9 -CPFC1 BR BR
1 24V 1 RD PL PLS 19 5 PLS 5 6 PLS
CPFS1 PK PK 5 24V 5 5 24V -CPFC1 4 7 -CPFS1 OR OR
2 -CPFS1 2 PK GY VAREF(PWS) 11 1 VAREF(PWS) 1 2 VAREF(PWS)
10 -CPFS1 10 4 -CPFS1 GND 13 25 GND PK PK
GY GY GY PL PWS 15 3 PWS 3 1 PWS
1 S-GND 1 9 S-GND 9 11 S-GND -PED1 14 23 -PED1
C PL PL PL BL 6Pin C
LUD1 2 LUD1 2 8 LUD1 8 16 LUD1 5V1 12 27 5V1
BL BL BL PK CN-I
3 5V 3 2 5V 2 17 5V LUD1 11 21 LUD1 TFD
GY PK BL
GY GY 4 S-GND 4 9 S-GND -LUM1 1 1 -LUM1 BL BL
1 S-GND 1 LB OR 5V(TFD) 12 6 5V(TFD) 6 1 5V(TFD) 1 LD 1 5V(TFD)
LB LB 3 -PED1 3 18 -PED1 -PFUND 10 19 -PFUND LB LB
PED1 2 -PED2 2 BL LB TFD 14 7 TFD 7 2 TFD 2 GY 2 TFD
BL BL 1 5V 1 15 5V UCSS4 9 17 UCSS4 GY GY
3 5V 3 OR PL GND(TFD) 16 8 GND(TFD) 8 3 GND(TFD) 3 3 GND(TFD)
2 -LUM1 UCSS3 8 15 UCSS3 RD RD
GY BR 24V(RRC) 8 4 24V(RRC) 4
1 P-GND UCSS2 7 13 UCSS2 BL BL
1 PK -RRC 10 5 -RRC 5 1 24V(RRC) 1
1 -LUM1 1 UCSS1 6 11 UCSS1 PL PL RRC
LUM1 GY -PSD 2 1 -PSD 1 4 -RRC 4
2 P-GND 2 P-GND 2 3 P-GND BL BL
2 5V(PSD) 6 3 5V(PSD) 3
GY GY
GND(PSD) 4 2 GND(PSD) 2 1 -PSD
LIFT UP MOTER PWB 3 5V(PSD)
2 GND(PSD) PSD

CN-G 1 GND(PEDMFT)
GY 2 PEDMFT
GY 2 GND(PEDMFT) 2
GND(PEDMFT) 3 LB 3 5V(PEDMFT) PEDMFT
LB 3 PEDMFT 3
PEDMFT 5 BL
BL 1 5V(PEDMFT) 1
5V(PEDMFT) 1 RD
RD 4 24V(MPFS) 4 1
24V(MPFS) 7 PL MPFS
LOWER PL 5 -MPFS 5 2
B -MPFS 9 B
OPTION RD
24V(TRCH) 23 1 24V(TRCH) 1
CASSETTE UNIT LB
-TRCH 25 4 -TRCH 4
RD TRC
24V(TRCL) 27 3 24V(TRCL) 3
PL
12Pin -TRCL 29 2 -TRCL 2
BL
DRAWER CN-B CN-A CN-H 5V(PPD1) 18
RD RD GY
1 24V 1 PPD1 20 BL
CPFC2 BR BR RD RD PK 1 5V(PPD1) 1 1 5V(PPD1)
2 -CPFC2 2 6 24V 6 2 24V 24V 3 6 24V GND(PPD1) 22 GY
BR LB BL 2 PPD1 2 2 PPD1
RD RD 11 -CPFC2 11 6 -CPFC2 -CPFC2 5 10 -CPFC2 5V(PPD2) 24 BL PPD1
1 24V 1 RD PL GY 3 GND(PPD1) 3 3 GND(PPD1)
CPFS2 PK PK 5 24V 5 1 24V -CPFS2 4 8 -CPFS2 PPD2 26 BL
2 -CPFS2 2 PK GY BR 4 5V(PPD2) 4
10 -CPFS2 10 4 -CPFS2 GND 13 26 GND GND(PPD2) 28 GY
GY GY GY PL 5 PPD2 5
1 S-GND 1 9 S-GND 9 7 S-GND -PED2 12 24 -PED2 RD 1 5V(PPD2)
PL PL PL BL 6 GND(PPD2) 6
LUD2 2 LUD2 2 8 LUD2 8 10 LUD2 5V1 14 28 5V1 2 PPD2
BL BL BL PK PPD2
3 5V 3 2 5V 2 11 5V LUD2 11 22 LUD2 3 GND(PPD2)
GY PK CN-I
GY GY 4 S-GND 4 8 S-GND -LUM2 1 2 -LUM2
1 S-GND 1 LB GY BL
LB LB 3 -PED2 3 12 -PED2 P-GND 2 4 P-GND BL
PED2 2 -PED2 2 BL LB 5V(PID) 18 LB 1 5V(PID) 1 1 5V(PID)
BL BL 1 5V 1 9 5V LCSS4 9 18 LCSS4 LB
3 5V 3 OR PL PID 20 GY 2 PID 2 2 PID
3 -LUM2 LCSS3 8 16 LCSS3 GY PID
GY BR GND(PID) 22 RD 3 GND(PID) 3 3 GND(PID)
5 P-GND LCSS2 7 14 LCSS2
1 PK CSWR 24 GY 4 CSWR 4
1 -LUM2 1 LCSS1 6 12 LCSS1
LUM2 GND(CSWR) 26 RD 5 GND(CSWR) 5
2 P-GND 2 CSWR
A 2 24V(SFM) 1 BL A
-SFM 3 CSWR
1 24V(SFM) 1 GND(CSWR)
LIFT UP MOTER PWB 2 -SFM 2

SFM
MAIN CONTROL PWB

8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1
(10) DC POWER SECTION PROCESS UNIT SECTION

D D

1 10V 1 1 10V 1
C PK C
2 SOUT1 2 DM PWB 2 SOUT2 2 ID PWB
3 -DMLED 3 3 -IDLED 3

CN-C
RD RD RD RD
DM0 5 16 DM0 16 6 DM0 6 6 DM0 6 3 DM0
LB LB LB BR
-DMLED 24 14 -DMLED 14 4 -DMLED 4 5 -IDLED 5 5 ID0
BR BR BR BL
-IDLED 25 15 -IDLED 15 5 -IDLED 5 7 ID0 7 4 10V(PC)
BL BL BL OR
ID0 26 17 ID0 17 7 ID0 7 2 10V(PC) 2 1 GND(PC)
OR OR OR GY
10V(PC) 27 12 10V(PC) 12 8 10V(PC) 8 3 GND(PC) 3 2 SOUT1
GY GY GY OR
GND(PC) 30 13 GND(PC) 13 9 GND(PC) 9 1 10V 1 6 SOUT2
PL
18Pin 4 SOUT1 4
20Pin
MAIN CONTROL PWB DRAWER
SENSOR VR PWB

B B

A A

8 7 6 5 4 3 2 1
 8 6 7 5 4 3 2 1
(11) DC POWER SECTION OPTIONS SECTION
LB
15 -ST-RES
LB CN3
16 -ST-RES
SUB CONTROL PWB
CN-G
D GY D
GND(RIC) 16 2 GND(RIC)
PL
RC-CTS 12 3 RC-CTS
PK
RC-DSR 10 4 RC-DSR
LB
RC-RXD 8 5 RC-RXD RIC
RD
RC-TXD 2 6 RC-TXD
BL
1 -DOC 1 5V(RIC) 14 11 5V(RIC)
DOC OR
2 24V 2 RC-DTR 4 13 RC-DTR
BR
RC-RTS 6 15 RC-RTS
GY
1 F-GND

GY
GND 1 1 GND 1
BL
5V 2 2 5V 2 CN-J 7 5V(DESK)
DPPD2 PK CN702
DPPD2 3 3 DPPD2 3 14 S-GND(DESK)
PK PK DCPS
22 -DOC 22 22 -DOC 28 24V(DESK)
RD RD
21 24V 21 21 24V 27 P-GND(DESK)
GY GY
GND 1 1 GND 1 23 GND 23 23 GND
BL GY GY
5V 2 2 5V 2 24 -DPUND 24 24 -DPUND
DPPD1 LB PL PL PL BL BL
DPPD1 3 3 DPPD1 3 3 -APHPS1 3 4 -APHPS1 4 4 -APHPS1 11 5V(DESK) 11
LB LB LB GY GY
2 APHPS2 2 3 APHPS2 3 3 APHPS2 13 S-GND(DESK) 13
BR BR BR RD RD
4 -DTPID 4 2 -DTPID 2 2 -DTPID CN-K 10 24V(DESK) 10
C GY OR OR OR GY GY C
GND 1 5 -DPFD 5 11 -DPFD 11 11 -DPFD 12 P-GND(DESK) 12
OR LB LB LB LB LB
DPFD 2 7 -DPPD1 7 8 -DPPD1 8 8 -DPPD1 -TRC 14 8 -TRC 8
DPFD BL PK PK PK OR OR DESK
5V 3 6 -DPPD2 6 7 -DPPD2 7 7 -DPPD2 -DK-DTR 8 4 -DK-DTR 4
BL BL BL BL BL
10 5V 10 6 5V 6 6 5V DK-TXD 4 2 DK-TXD 2 UNIT
GY GY GY GY GY
20 GND 20 5 GND 5 5 GND GND(DK) 2 1 GND(DK) 1
GY GY GY GY PL PL
GND 1 1 -DPCSW 1 1 -DPCSW 1 1 -DPCSW DK-RES 12 6 DK-RES 6
BR PL PL BR BR
DTPID 2 8 -DPFC 8 9 -DPFC 9 9 -DPFC -DK-RXD 6 3 -DK-RXD 3
DTPID BL BR BR PK PK
5V 3 9 -DRRC 9 10 -DRRC 10 10 -DRRC -DK-DSR 10 5 -DK-DSR 5
RD RD GY GY
11 24V 11 20 24V 20 20 24V 14 F-GND 14
LB LB
12 -PAM1-3 12 16 -PAM1-3 16 16 -PAM1-3
GY PL PL
GND 1 13 -PAM1-2 13 17 -PAM1-2 17 17 -PAM1-2 CN-K LB
LB BR BR
APHPS2 2 14 -PAM1-1 14 18 -PAM1-1 18 18 -PAM1-1
BL OR OR LB
APHPS2 5V 3 15 -PAM1-0 15 19 -PAM1-0 19 19 -PAM1-0 -ST-RES 1 1 -ST-RES 1
LB LB GY GY
16 -PAM2-3 16 12 -PAM2-3 12 12 -PAM2-3 GND(ST) 11 2 GND(ST) 2
PL PL PL PL
17 -PAM2-2 17 13 -PAM2-2 13 13 -PAM2-2 ST-TXD 3 3 ST-TXD 3
GY BR BR GY GY
GND 1 18 -PAM2-1 18 14 -PAM2-1 14 14 -PAM2-1 GND(ST) 13 4 GND(ST) 4
PL PK PK BR BR
APHPS1 -APHPS1 2 19 -PAM2-0 19 15 -PAM2-0 15 15 -PAM2-0 -ST-RXD 5 5 -ST-RXD 5
BL GY GY
5V 3 GND(ST) 15 6 GND(ST) 6
PK PK
-ST-DSR 7 7 -ST-DSR 7 SOTER1
CN-F GY GY
GND(ST) 17 8 GND(ST) 8
OR PL OR OR
B 1 -PAM1-0 1 13 -PAM1-0 -DPFC 12 -ST-DTR 9 9 -ST-DTR 9 B
BR BR 1 24V(CV) GY GY
2 -PAM1-1 2 15 -PAM1-1 -DRRC 10 GND(ST) 19 10 24V(ST) 10
PL RD 2 GND(CV) RD RD
3 -PAM1-2 3 17 -PAM1-2 24V 1 24V(ST) 21
PAM1 LB LB 3 -CV-COPY
4 -PAM1-3 4 19 -PAM1-3 -PAM1-3 20 CN-M
RD PL 4 -CV-COUNT 12Pin
5 24V 5 2 24V -PAM1-2 18
RD BR 5 -CV-START BR
6 24V 6 3 24V -PAM1-1 15 RXD-SORT 3 1 ST-TXD 1
PK OR 6 -CV-CA GY
21 -PAM2-0 -PAM1-0 14 GND(ST) 2 2 ST-RXD 2
1 -PAM2-0 1 BR LB 7 -CV-STAPLE PK
23 -PAM2-1 -PAM2-3 28 TXD-SORT 1 3 ST-DTR 3
2 -PAM2-1 2 PL PL 8 -CV-DUPLEX GY
25 -PAM2-2 -PAM2-2 26 GND(ST) 4 4 ST-DSR 4
3 -PAM2-2 3 LB BR 9 -CV-SIZE0 GY
PAM2 27 -PAM2-3 -PAM2-1 24 GND(ST) 6 5 ST-RES 5
4 -PAM2-3 4 RD PK 10 -CV-SIZE1 SOTER2
4 24V -PAM2-0 22 6 24V(ST) 6
5 24V 5 RD 11 -CV-SIZE2
5 24V 7 5V(SORT) 7
6 24V 6 RD 12 -CV-SIZE3 WOOD PECKER PLUS
6 24V ADU DIODE 8 S-GND(SORT) 8
PL ONLY
11 -DPFC PWB 9 P-GND(SORT) 9
24V(CV) 1
7 24V 10 F-GND(SORT) 10
GND(CV) 2
9 -DRRC 12Pin
1 24V 1 -CV-COPY 3 MAIN CONTROL PWB
DPFC
2 -DPFC 2 -CV-COUNT 4 1 RXD-SORT 1
-CV-START 5 2 S-GND(SORT) 2
RD -CV-CA 6 3 TXD-SORT 3
1 24V 1 RD
DRRC BR ADU UNIT -CV-STAPLE 7 CN702 24V(SORT) 22 1 24V(SORT) 1 4 S-GND(SORT) 4
2 -DRRC 2 BL BL
A -CV-DUPLEX 8 DCPS 5V(SORT) 4 3 5V(SORT) 3 10 S-GND(SORT) 10 SOTER3 A
GY GY RD
-CV-SIZE0 9 S-GND(SORT) 25 6 S-GND(SORT) 6 9 24V(ST) 9
GY RD
-CV-SIZE1 10 30Pin P-GND(SORT) 23 2 24V(SORT) 2 11 24V(ST) 11
GY
-CV-SIZE2 11 4 P-GND(SORT) 4 12 P-GND(SORT) 12
GY
-CV-SIZE3 12 5 F-GND(SORT) 5 5 F-GND(SORT) 5

COIN VENDER

8 7 6 5 4 3 2 1
 CAUTION FOR BATTERY REPLACEMENT
(Danish) ADVARSEL !
Lithiumbatteri-Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kun ske med batteri
af samme fabrikat og type.
Levér det brugte batteri tilbage til leverandoren.
(English) Caution !
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
"BATTERY DISPOSAL"
CONTAINS MANGANESE DIOXIDE LITHIUM BATTERY.
MUST BE DISPOSED OF PROPERLY.
REMOVE THE BATTERY FROM THE PRODUCT AND
CONTACT FEDERAL OR STATE ENVIRONMENTAL
AGENCIES FOR INFORMATION ON RECYCLING AND
DISPOSAL OPTIONS.
(Finnish) VAROITUS
Paristo voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainoastaan laitevalmistajan suosittelemaan
tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden
mukaisesti.
(French) ATTENTION
Il y a danger d'explosion s' il y a remplacement incorrect
de la batterie. Remplacer uniquement avec une batterie du
même type ou d'un type équivalent recommandé par
le constructeur.
Mettre au rébut les batteries usagées conformément aux
instructions du fabricant.
(Swedish) VARNING
Explosionsfare vid felaktigt batteribyte.
Använd samma batterityp eller en ekvivalent
typ som rekommenderas av apparattillverkaren.
Kassera använt batteri enligt fabrikantens
instruktion.
COPYRIGHT ã 2000 BY SHARP CORPORATION
All rights reserved.
Printed in Japan.
No part of this publication may be reproduced,
stored in a retrieval system, or transmitted.
In any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise,
without prior written permission of the publisher.

SHARP CORPORATION
Digital Document Systems Group
Quality & Reliability Control Center
Yamatokoriyama, Nara 639-1186, Japan
2000 November Printed in Japan