Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Reinforcement Calculation

    Uploaded by

    Mohit Vats
    The document provides calculations to determine the required rebar area for a beam. It includes the beam dimensions, number and diameter of rebars, spacing between parallel bars, and calculations of individual and total rebar areas. The total rebar area of 0.93 square inches is above the minimum reinforcement area of 0.75% of the cross-sectional area, which is 0.72 square inches.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Reinforcement Calculation

    Uploaded by

    Mohit Vats
    21 views3 pages
    The document provides calculations to determine the required rebar area for a beam. It includes the beam dimensions, number and diameter of rebars, spacing between parallel bars, and calculations of individual and total rebar areas. The total rebar area of 0.93 square inches is above the minimum reinforcement area of 0.75% of the cross-sectional area, which is 0.72 square inches.

    Original Title

    5. Reinforcement Calculation

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides calculations to determine the required rebar area for a beam. It includes the beam dimensions, number and diameter of rebars, spacing between parallel bars, and calculations of individual and total rebar areas. The total rebar area of 0.93 square inches is above the minimum reinforcement area of 0.75% of the cross-sectional area, which is 0.72 square inches.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    21 views3 pages

    Reinforcement Calculation

    Uploaded by

    Mohit Vats
    The document provides calculations to determine the required rebar area for a beam. It includes the beam dimensions, number and diameter of rebars, spacing between parallel bars, and calculations of individual and total rebar areas. The total rebar area of 0.93 square inches is above the minimum reinforcement area of 0.75% of the cross-sectional area, which is 0.72 square inches.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 3

    REBAR AREA FROM REBAR N

    Nos.
    6
    4
    4
    Total
    Minimum clear spacing between parllel bars in a
    layer shall be equal to 1.5D bar diameter but not
    less than 35 mm(section 8.1.7.3 BNBC/ACI)
    Beam Rebar Area
    inch mm No. Sraight
    Direction Length = 20 508 2 16
    Dia of Bar = 20 No. Extra
    No of Bar = 4 1 16
    1.5D = 30 mm 0 16
    Lowest Limit = 35 mm
    Usual Highest Limit = 300 mm
    Spacing Between Bar = 111 mm RCC Cross Section
    OK L (unit) B (unit)
    108 12

    4.3701 inch
    (in2)
    10 0.76 13.16 25mm
    10 0.487 20.53 20mm
    10 0.31 32.26 16mm
    REBAR AREA FROM REBAR NUMBERS
    Rebar Dia Total Rebar
    25 4.56 in2
    20 1.948 in2 22900
    16 1.24 in2 76.333333
    3.188 in2

    Beam Rebar Area


    Area Total 655
    0.31 0.62 500
    Area Total 925
    Ok
    0.31 0.31
    0.31 0
    Grand Total 0.93

    Minimum Reinf. Area of Rebar Required


    % sq.unit
    0.75 9.72
    81.875

    1.988272E+16

    You might also like