Scribd Logo
Upload

Welcome to Scribd!

  • 44 views

    Bright Cold Galvanising Spray: Technical Data

    Uploaded by

    sivagnanam s
    Bright Cold Galvanising Spray is a single component coating that provides corrosion protection and matches the appearance of freshly galvanized metal surfaces. It contains zinc and aluminum powders in a resin formulation that forms a flexible, glossy film when applied. The spray adheres well and resists rust, peeling and fading, protecting various ferrous metals for several months to over a year depending on environment. It is intended for touch-ups of hot-dip galvanized parts and repairs of surfaces in various industrial and construction applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bright Cold Galvanising Spray: Technical Data

    Uploaded by

    sivagnanam s
    44 views2 pages
    Bright Cold Galvanising Spray is a single component coating that provides corrosion protection and matches the appearance of freshly galvanized metal surfaces. It contains zinc and aluminum powders in a resin formulation that forms a flexible, glossy film when applied. The spray adheres well and resists rust, peeling and fading, protecting various ferrous metals for several months to over a year depending on environment. It is intended for touch-ups of hot-dip galvanized parts and repairs of surfaces in various industrial and construction applications.

    Original Title

    BRIGHT GALVANISE

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Bright Cold Galvanising Spray is a single component coating that provides corrosion protection and matches the appearance of freshly galvanized metal surfaces. It contains zinc and aluminum powders in a resin formulation that forms a flexible, glossy film when applied. The spray adheres well and resists rust, peeling and fading, protecting various ferrous metals for several months to over a year depending on environment. It is intended for touch-ups of hot-dip galvanized parts and repairs of surfaces in various industrial and construction applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    44 views2 pages

    Bright Cold Galvanising Spray: Technical Data

    Uploaded by

    sivagnanam s
    Bright Cold Galvanising Spray is a single component coating that provides corrosion protection and matches the appearance of freshly galvanized metal surfaces. It contains zinc and aluminum powders in a resin formulation that forms a flexible, glossy film when applied. The spray adheres well and resists rust, peeling and fading, protecting various ferrous metals for several months to over a year depending on environment. It is intended for touch-ups of hot-dip galvanized parts and repairs of surfaces in various industrial and construction applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Technical Data

    BRIGHT COLD GALVANISING SPRAY


    BRIGHT, GLOSSY COATING FOR NEWLY GALVANIZED PARTS

    GENERAL DESCRIPTION

    A single component, zinc-aluminium coating


    combining corrosion protection properties with
    the lustre look of recently galvanized parts.
    Bright Cold Galvanising Spray is a combination
    of zinc and aluminium powders, resins and
    additives, formulated to form a flexible
    protective film with a bright, glossy
    appearance.

    FEATURES

    • Excellent touch-up for freshly galvanized surfaces.


    • Provides e xcellent corrosion and rust resistance to ferrous metals.
    • Unique combination of flexibility and hardness.
    • Resists rusting, peeling and fading.
    • Adheres well to metal surfaces.
    • Excellent colour match for recently hot-dip galvanized parts
    • Totally lead and chromate free.
    • No chlorinated solvents.

    APPLICATIONS

    • Touch-up at Hot-Dip galvanizing plants • Fences and gates


    • Home, garden and farm equipment • Construction equipment
    • Structural steel • Guard rails
    • Welding seams • Pipes and fittings
    • Coastal and shipborne installations • Repair of LPG storage tanks

    DIRECTIONS

    • Shake aerosol can very well for at least one minute after agitator ball is free.
    Repeat frequently while using.
    • Apply to a clean, degreased, dry surface for best results. Remove rust and
    scale with a wire brush.
    • Apply in light, even coats; best results are obtained with 2 lighter rather than
    1 heavy coat.
    • Additional coats can be applied after 15-20 minutes.
    • When spraying is finished, clean aerosol valve by turning can upside down
    and press button until only propellant escapes. If clogging occurs, remove
    button and clean orifice with fine wire.
    • Do not use on energized equipment. Use in well ventilated area.
    TECHNICAL DATA

    Appearance : Bright Aluminum Finish


    Resin Type : Modified Alkyd
    Pigment Type : Mixture of Zinc (purity 98%) and
    Nonleafing Aluminum
    Specific Gravity (@ 20°C) : 1.06
    Flash Point (solvents) -4°C
    Coverage (30 µm, dry) : Approx. 1.6 m2/can (400 ml)
    Application Conditions
    Minimum Ambient Temperature : 10°C
    Minimum Surface Temperature : 5°C ; 3°C over dew point
    Maximum Humidity : 85 %RH
    Drying Times : 30 min
    - To Touch 4h
    - To Handle Complete Curing : 90% Cured After 7 Days @ 23°C
    Recommended Film Thickness : 30-40 µm
    Thinner / Cleaner : White Spirit, Acetates
    Dry film properties (35 µm on degreased : 100 h (*)
    metal) Salt spray (ASTM B 117)
    Adhesion on steel (ASTM D 3359) : GT= 0/1
    Flexibility (6 mm mandrel, visual) : Pass
    Heat resistance (4 h @ 200°C) : Slight Yellowing
    Low temperature resistance : -30°C
    Hardness Persoz (after 72 h) : 80 s
    Packaging: : 12 x 400ml

    * Typical corrosion protection results will depend mainly on surface conditions


    and environment. It may be several months up to over 1 year outdoors or more
    than 2 years indoors.The first a pplication therefore should be checked
    periodically for signs of corrosion. Once the time of protection under any
    specific condition is determined, Bright Cold Galvanising Spray may be re-
    applied at intervals to maintain protection.

    STORAGE
    The product may be stored at normal ambient temperatures and has a shelf life of
    not less than 48 months with correct storage. Aerosols should always be stored
    below 50OC, away from direct heat and naked flame.

    HEALTH AND SAFETY


    Health and Safety sheet available s eparately.

    TECHNICAL SERVICE
    CRC Industries UK Ltd provides a technical support service and maintains a constant
    programme of research and development. We are able to assist customers by
    specific product development to meet particular requirements.

    MISREPRESENTATION ACT 1967 TRADE DESCRIPTIONS ACT 1968


    The information given in this publication is based on our experience and reports from
    customers. There are many factors outside our control and knowledge which affect
    the use and performance of our products and for which reason no warranty is given,
    express or implied. Users should make their own tests to determine the applicability
    of such information or the suitability of any products for their own particular
    purposes. Statements concerning the use of the products described herein are not to
    be construed as recommending the infringement of any patent and no liability for
    infringement arising out of any such use is to be assumed.

    CRC Industries UK Limited, Ambersil House, Wylds Road,

    Castlefield Industrial Estate, Bridgwater, Somerset, TA6 4DD

    Tel: 01278 727200 Fax: 01278 425644 Email: [email protected]

    You might also like