Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    Design c39

    Uploaded by

    Narayan W
    This document summarizes the design of a footing, cantilever slab, and strip beam. The footing has a size of 9.03 ft by 13.13 ft and supports a total load of 512 MT. The cantilever slab has a span of 3.02 ft and requires a depth of 15 in. Reinforcement of 16mm diameter bars at 125mm spacing is provided. The strip beam has a size of 36 in by 36 in, supports a load of 57,391 lb/ft from the cantilever slab, and requires a depth of 19.7 in. Shear checks for the cantilever slab and strip beam are also provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Design c39

    Uploaded by

    Narayan W
    22 views4 pages
    This document summarizes the design of a footing, cantilever slab, and strip beam. The footing has a size of 9.03 ft by 13.13 ft and supports a total load of 512 MT. The cantilever slab has a span of 3.02 ft and requires a depth of 15 in. Reinforcement of 16mm diameter bars at 125mm spacing is provided. The strip beam has a size of 36 in by 36 in, supports a load of 57,391 lb/ft from the cantilever slab, and requires a depth of 19.7 in. Shear checks for the cantilever slab and strip beam are also provided.

    Original Title

    design c39.xlsx

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a footing, cantilever slab, and strip beam. The footing has a size of 9.03 ft by 13.13 ft and supports a total load of 512 MT. The cantilever slab has a span of 3.02 ft and requires a depth of 15 in. Reinforcement of 16mm diameter bars at 125mm spacing is provided. The strip beam has a size of 36 in by 36 in, supports a load of 57,391 lb/ft from the cantilever slab, and requires a depth of 19.7 in. Shear checks for the cantilever slab and strip beam are also provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    22 views4 pages

    Design c39

    Uploaded by

    Narayan W
    This document summarizes the design of a footing, cantilever slab, and strip beam. The footing has a size of 9.03 ft by 13.13 ft and supports a total load of 512 MT. The cantilever slab has a span of 3.02 ft and requires a depth of 15 in. Reinforcement of 16mm diameter bars at 125mm spacing is provided. The strip beam has a size of 36 in by 36 in, supports a load of 57,391 lb/ft from the cantilever slab, and requires a depth of 19.7 in. Shear checks for the cantilever slab and strip beam are also provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4

    FOOTING ID CF1

    P1 P2
    400 400
    COLUMN SIZE
    750 900
    COLUMN LOADS P1(MT) P2(MT) Fe 500
    280 232 M 40
    Total Load " P "( MT) 512
    S.B.C (T/SFT) 5
    Area of the Footing r 112.64 Width (ft) 9.03 2.75 m
    Area of the Footing P118.5639 O.K Length (ft) 13.13 4.00 m
    NUPI (lb/ft2) 9517.64 4.32 T/SFT
    SAFE <SBC
    Design of Cantilever slab:
    Span L (ft) 3.02 0.9 m 280
    Bending Moment (in-l ### 58.66 kn-m
    d reqd. (in) 15.0 382 mm

    Provide D (in) 24 600 mm


    Effective Depth (in) 22 560 mm 3.0

    Ast (in2) 0.65 419.32 mm2

    Provide 12mm dia (i 3.14 80 mm


    Provide 16mm dia (i 5.72 145 mm
    So,Provide 16mm dia bars at 125 mmc/c 3.00

    Design of Strip Beam:


    Span L (ft) 6.82 2.1 m
    B D
    Try Beam of size (IN) 36 36 INCH 3.0
    900 900 MM
    Provided Load due to
    Cantilever Slab( lb/ft) 57391 838 kn/m 3.5 6.8
    Bending Moment (in-l ### 301.64 kn-m
    (W*L*L/12)
    d reqd. (in) 19.7 500 mm
    13.1
    Check for Deep Beam:
    Span L (ft) 6.82 2.08 m CHECK FOR SHEAR IN CANTILEVER SLAB
    Depth D (ft) 3.00 0.91 m V 19971.17 lb
    Effective Depth 34 860 mm
    L/D 2.27 <2.5 88.8 kn
    It is necessary to design it
    Deep Beam Conditio Tv 0.24 N/mm2
    Span L (ft) 6.82 2.08 m Tc 1.58 N/mm2
    Depth D (ft) 3.00 0.91 m
    Lever Arm Z (ft) 2.264 690 mm SHEAR CHECK O.K
    Ast (in2) 2.46 1589 mm2

    Not Deep Beam Cond


    Ast (in2) 2.77 1784.36 mm2
    Calculation of CG of load

    CG from P1 3.09 ft
    941.93 mm

    GRADE R
    M20/FE 500 0.8 N/MM2
    M25/FE 500 0.98 N/MM2
    M30/FE 500 1.15 N/MM2
    M35/FE 500 1.32 N/MM2
    232

    9.0

    2.8

    ANTILEVER SLAB
    AR CHECK O.K

    You might also like