Scribd
Upload
44 views4 pages

Design of Cantilever Slab:: Area of The Footing R

This document summarizes the design of a footing, cantilever slab, and strip beam. Key details include: - The footing has an area of 112.64 square feet and supports a total load of 512 metric tons. - The cantilever slab has a span of 3.02 feet and requires a depth of 15 inches. Reinforcement of 16mm diameter bars at 125mm centers is specified. - The strip beam has a span of 6.82 feet and a depth of 36 inches. It supports a load of 57,391 pounds per foot from the cantilever slab. Shear checks for both the cantilever slab and strip beam indicate safe design.

Uploaded by

Narayan W
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
44 views4 pages

Design of Cantilever Slab:: Area of The Footing R

This document summarizes the design of a footing, cantilever slab, and strip beam. Key details include: - The footing has an area of 112.64 square feet and supports a total load of 512 metric tons. - The cantilever slab has a span of 3.02 feet and requires a depth of 15 inches. Reinforcement of 16mm diameter bars at 125mm centers is specified. - The strip beam has a span of 6.82 feet and a depth of 36 inches. It supports a load of 57,391 pounds per foot from the cantilever slab. Shear checks for both the cantilever slab and strip beam indicate safe design.

Uploaded by

Narayan W
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

FOOTING ID CF1

P1 P2
400 400
COLUMN SIZE
750 900
COLUMN LOADS P1(MT) P2(MT) Fe 500
280 232 M 40
Total Load " P "( MT) 512
S.B.C (T/SFT) 5
Area of the Footing r 112.64 Width (ft) 9.03 2.75 m
Area of the Footing P118.5639 O.K Length (ft) 13.13 4.00 m
NUPI (lb/ft2) 9517.64 4.32 T/SFT
SAFE <SBC
Design of Cantilever slab:
Span L (ft) 3.02 0.9 m 280
Bending Moment (in-l ### 58.66 kn-m
d reqd. (in) 15.0 382 mm

Provide D (in) 24 600 mm


Effective Depth (in) 22 560 mm 3.0

Ast (in2) 0.65 419.32 mm2

Provide 12mm dia (i 3.14 80 mm


Provide 16mm dia (i 5.72 145 mm
So,Provide 16mm dia bars at 125 mmc/c 3.00

Design of Strip Beam:


Span L (ft) 6.82 2.1 m
B D
Try Beam of size (IN) 36 36 INCH 3.0
900 900 MM
Provided Load due to
Cantilever Slab( lb/ft) 57391 838 kn/m 3.5 6.8
Bending Moment (in-l ### 301.64 kn-m
(W*L*L/12)
d reqd. (in) 19.7 500 mm
13.1
Check for Deep Beam:
Span L (ft) 6.82 2.08 m CHECK FOR SHEAR IN CANTILEVER SLAB
Depth D (ft) 3.00 0.91 m V 19971.17 lb
Effective Depth 34 860 mm
L/D 2.27 <2.5 88.8 kn
It is necessary to design it
Deep Beam Conditio Tv 0.24 N/mm2
Span L (ft) 6.82 2.08 m Tc 1.58 N/mm2
Depth D (ft) 3.00 0.91 m
Lever Arm Z (ft) 2.264 690 mm SHEAR CHECK O.K
Ast (in2) 2.46 1589 mm2

Not Deep Beam Cond


Ast (in2) 2.77 1784.36 mm2
Calculation of CG of load

CG from P1 3.09 ft
941.93 mm

GRADE R
M20/FE 500 0.8 N/MM2
M25/FE 500 0.98 N/MM2
M30/FE 500 1.15 N/MM2
M35/FE 500 1.32 N/MM2
232

9.0

2.8

ANTILEVER SLAB
AR CHECK O.K

You might also like