Scribd
Upload
147 views2 pages

CVM-C10: Technical Features

This document summarizes the technical features of the CVM-C10 Power Analyzer. The CVM-C10 can measure voltage from 85-265Vac/95-300Vdc and current from /5A, /1A, or /250mA. It samples at 64 samples per cycle and provides measurements of voltage, current, power, and energies with 0.5% and 1% accuracy. Communication is via RS-485 Modbus/RTU protocol. Outputs include 2 digital outputs via an S0 interface and 2 relay outputs. Inputs include 2 digital inputs. The CVM-C10 provides IP65 protection and complies with various IEC standards. It can measure in single or multi-phase

Uploaded by

Installer Kimonz1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
147 views2 pages

CVM-C10: Technical Features

This document summarizes the technical features of the CVM-C10 Power Analyzer. The CVM-C10 can measure voltage from 85-265Vac/95-300Vdc and current from /5A, /1A, or /250mA. It samples at 64 samples per cycle and provides measurements of voltage, current, power, and energies with 0.5% and 1% accuracy. Communication is via RS-485 Modbus/RTU protocol. Outputs include 2 digital outputs via an S0 interface and 2 relay outputs. Inputs include 2 digital inputs. The CVM-C10 provides IP65 protection and complies with various IEC standards. It can measure in single or multi-phase

Uploaded by

Installer Kimonz1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Measurement and Control

Technical features
Power Supply 85...265 Vac / 95...300 Vdc
Measurement Votage 300 Vac ph-n / 520 Vac ph-ph 50...60 Hz

CVM-C10
Current ITF ... /5 A and /1 A
MC ... /250 mA
Sampling rate 64 Samples/cycle
Accuracy V, I, kW 0,5% (without CT)
Energies 1% (without CT) Compact & versatile
Communications Protocol RS-485 Modbus/RTU
(A(+) & B(-)) Power Analyzer
Speed (bauds) 9600, 19200, 38400
Bit, parity, stop 8, n, 1
Outputs 2 built-in digital outputs S0 interface
Configurable to 1000 impulses
by kWh, kVarh, etc. The new generation of CVM
2 NPN Transistors
(24 Vdc max, 50 mA,
5 imp/s, Max Ton/Toff configurable)
2 built-in relay outputs Max / Min / NO/NC /
Hysteresis / Latch 250 Vac, 6 A
Inputs 2 built-in digital inputs Tariff selection or
external alarms
NPN, optoinsulated
Security Protection Degree Frontal Protection IP65
Class III category / EN 61010
Double-insulated electric shock protection class II
Standards IEC 61000, IEC 61000-4-3, IEC 610004-11,
IEC 61000-4-4, IEC 610004-5, Measure
according to MID, according to UL

References
Current
measurement Current
Type Code channels input
CVM-C10-ITF-485-ICT2 M55911 3 /5 or /1 A
CVM-C10-MC-485-ICT2 M55921 3 /250 mA
CVM-C10-ITF-IN-485-IC2 M55942 4 /5 or /1 A

www.circu t or.com
CIRCUTOR, SA - Vial Sant Jordi, s/n
08232 Viladecavalls (Barcelona) Spain
Tel. (+34) 93 745 29 00 - Fax: (+34) 93 745 29 14
[email protected]
Technology for energy efficiency

Designed by Communication Dept. - CIRCUTOR, SA. Code: C2M5E3-01


CVM-C10 New Redesigned interface
Compact & versatible • Backlight touch keyboard

Power Analyzer (96 x 96 mm) • Analog visualizations for instantaneous parameters


(Power, MaxPower reach and Cosφ or PF)
Measure in Single-phase, bi-phase (2-3 wires) • Backlight display
and three-phase (3-4 wires) networks
4-Quadrant measurement for consumption and
generation in the same measurement point
High IP protection (Frontal IP65) max

Measurements taken with the efficient transformers


of CIRCUTOR'S MC range or /5 A or /1 A transformers PF
2 built-in digital outputs (S0 Interface or alarms)
Cosφ
2 built-in digital outputs by relay
Power
2 built-in digital inputs (tariff selection or external alarms)
RS-485 Modbus/RTU Communications touch keyboard

MC3

Power

2 built-in digital inputs


(tariff selection or external alarm) New Parameters!

2 built-in digital RS-485


outputs (relay)

KgCO2
COSTS
2 built-in digital outputs
COSTES
Compatible
with
PowerStudio
SCADA system

You might also like