Itp For Storage Tanks

DOC. NO.
UAG/ITP/001
Rev. 0
ITP Date:
Page No. Page 1 of 7
SL No Item description CC TPI Owner

1 Civil and building
1.1 Earthwork
Soil materials
Backfilling
1.1.1
Earth dike
Underground piping and cable
Excavation
1) Dimension
- Location
- Level
- Line
1.1.2
- Profiles
2) Excavated bottom
- Soil conditions
- Degree of compaction
- Removal of unsuitable material
Backfilling
1.1.3 - Layering (Thickness of list)

- Degree of compaction
Filling and banking
1) Clearing and grubbing
2) Compaction
- Layering (Thickness of list)
1.1.4 - Degree of compaction

- Type of roller & number of roller passes
- Intensity of pressure applied to soil
3) Dimension
- Final line and grades
-----------------------------------------------------------------------------------------------------------------------------------------------------
Document Name:
 Quality Control Plan for Civil Work
 Inspection and Test Plan for Civil work
DOC. NO. UAG/ITP/001
Rev. 0
ITP Date:
- Level
- Slope
Compaction control
1) Max. dry density test
1.1.5 ASTM D 698 or ASTM D 2557

2) Field density test
- ASTM D 1556 or ASTM D 2167
1.2 Concrete work
Materials
1) Certificate of cement ASTM C-150
2) Aggregate
- Sample of aggregate
1.2.1 - Sieve analysis ASTM C-136

- Amount of chloride and sulfate
- Reactivity to alkalis
- ASTM C-227 and ASTM C-289
3) Reinforcing steel (Mill certificates)
Reinforcing steel works
1) Sizes
2) Numbers
1.2.2
3) Arrangement and location
4) Visual
5) Hook and lap splice
Form work
1) Visual
1.2.3
2) Dimension
3) Internal surface of forms
1.2.4 Visual of surface
-----------------------------------------------------------------------------------------------------------------------------------------------------
Document Name:
Rev. 0
ITP Date:
Grout and mortar finishing for foundation

1) Visual
2) Dimension (Thickness)
3) Filling into cavity in base plate of rotating
1.2.5
machines
4) Light hammer test for rotating machine
foundation
5) Type of grout
Concrete test
1) Compressive strength test
1.2.6 2) Slump test ASTM C143-90

3) Air content test
- ASTM C173 or 138
Water filling test for concrete ponds
1) Visual (Displacement or crack of structure &
1.2.7
water-proofing material)
2) Buoyant
1.3 Sewer and Drainage work

Materials
1) Sample check
1.3.1
2) Visual check
3) Manufacturer’s certificates (if required)
Dimension
1.3.2 1) Elevation and location

2) Lines
1.3.3 Welding (Refer to the section 7.1 welding)

Visual inspection of welds (Refer to the section
1.3.4
7.2 visual inspection of welds)
-----------------------------------------------------------------------------------------------------------------------------------------------------
Document Name:
Rev. 0
ITP Date:
1.3.5 Water tightness test
1.3.6 Protective coating/wrapping
1.4 Hot-Mixed asphalt pavements

Sub grade
1) Soil conditions
1.4.1
2) Non-repetitive staTPI plat load test
(ASTM D1196) or field CBR test
Granular sub-base
1) Materials
2) Layers (Thickness or list)
1.4.2 3) Non-repetitive staTPI plate load test

4) (ASTM D 119G) or field CBR test
5) Finished conditions of each layer
6) Elevation of finished surface
Asphalt concrete
1) Materials
- Aggregates
- Asphalt cement or road tar
2) Density of pavement (ASTM D 1188
or ASTM D 2726)
1.4.3
3) Finished elevation of asphalt surface
courses
4) Undulation of asphalt base and
surface courses
5) Thickness of asphalt base and
surface courses
Prime coat
1.4.4
1) Material
-----------------------------------------------------------------------------------------------------------------------------------------------------
Document Name:
Rev. 0
ITP Date:
2) Visual
Tack coat
1.4.5 1) Material
2) Visual
1.5 Concrete pavements

Sub-grade
1) Soil conditions
1.5.1
2) Non-repetitive staTPI plate load test
(ASTM D1196)
Granular sub-base
1) Materials
2) Layer (Thickness of list)
1.5.2 3) Non-repetitive staTPI plate load test

(ASTM D1196)
4) Finished condition of each layer
5) Elevation of finished surface
Concrete slab
1) Materials
- Concrete
- Reinforcement
- Expansion joint filler
- Joint sealer
1.5.3
- Sub-grade paper
2) Concrete test
3) Finished elevation & thickness of
concrete
4) Undulation of surface courses
5) Surface drainage
-----------------------------------------------------------------------------------------------------------------------------------------------------
Document Name:
Rev. 0
ITP Date:
1.6 Tank Pads

Materials
1) Filling material
1.6.1
2) Concrete
3) Re-bar
Sand filling compaction plate
1.6.2 Load test or field density test ASTM D1556 or

(ASTM D2167)
Dimension
1) Location
2) Top surfaces of sand fill
1.6.3 3) Finished surface (Slope, elevation)

4) Foundation roundness
5) Foundation finished elevation
6) Settlement records
1.6.4 Particle size distribution
1.6.5 Laboratory compaction
1.6.6 Embankment test results
1.7 Setting anchor bolts
1.7.1 Material Certificates

Setting in concrete
1) Orientation
1.7.2 2) Position and location
3) Plumb
4) Projection
1.7.3 Visual check
1.8 Acid proofing tile
1.8.1 Material certificates
-----------------------------------------------------------------------------------------------------------------------------------------------------
Document Name:
Rev. 0
ITP Date:
Concrete surface preparation
1.8.2 1) Slope
2) Milling of whole concrete surface
1.8.3 Visual check
1.8.4 Wet film thickness test
1.8.5 Spark test
1.9 Concrete basin, pit and sump (to belater)
1.10 Water and effluent trench (to be later)

Building (included H.V.A.C, plumbing F.F and
1.11
electrical) (to be later)
CC: Construction Contractor

TPI: Third Party Inspection
H: Hold Point; Hold on the production till TPI Inspector performs inspection and supervise the required
test
If you want to use this draft for inspection and test plan, you need to fill the TPI and Owner Column
based your project requirement. You may use following abbreviation for filling the columns:
W: Witness Point; Manufacture shall notify client and TPI Inspector but there is no hold on the
Construction;
R: Document Review; Review means Review document, which includes of material test certificates,
test reports, records and etc.
A: Approval
SW: Spot Witness; for items with spot witness contractor shall notify TPI inspector as fulfilling the
monitoring;
-----------------------------------------------------------------------------------------------------------------------------------------------------
Document Name:

Itp For Storage Tanks

Uploaded by

Copyright:

Available Formats

Itp For Storage Tanks

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Itp For Storage Tanks

Uploaded by

Copyright:

Available Formats

DOC. NO.

SL No Item description CC TPI Owner

1.1.3 - Layering (Thickness of list)

1.1.4 - Degree of compaction

1.1.5 ASTM D 698 or ASTM D 2557

1.2.1 - Sieve analysis ASTM C-136

1.2.4 Visual of surface

Grout and mortar finishing for foundation

1.2.6 2) Slump test ASTM C143-90

1.3 Sewer and Drainage work

1.3.2 1) Elevation and location

1.3.3 Welding (Refer to the section 7.1 welding)

1.3.5 Water tightness test

1.3.6 Protective coating/wrapping

1.4 Hot-Mixed asphalt pavements

1.4.2 3) Non-repetitive staTPI plate load test

1.5 Concrete pavements

1.5.2 3) Non-repetitive staTPI plate load test

1.6 Tank Pads

1.6.2 Load test or field density test ASTM D1556 or

1.6.3 3) Finished surface (Slope, elevation)

1.6.4 Particle size distribution

1.6.5 Laboratory compaction

1.6.6 Embankment test results

1.7 Setting anchor bolts

1.7.1 Material Certificates

1.7.3 Visual check

1.8 Acid proofing tile

1.8.1 Material certificates

Concrete surface preparation

1.8.3 Visual check

1.8.4 Wet film thickness test

1.8.5 Spark test

1.9 Concrete basin, pit and sump (to belater)

1.10 Water and effluent trench (to be later)

CC: Construction Contractor

You might also like