Isoflex PDP Series

ISOFLEX PDP
10, 38, 40, 48, 61 A Fernschreib. K, 65, 94, 300

Synthetic long-term oils
Description Application notes

ISOFLEX PDP oil
ISOFLEX PDP oils are synthetic ISOFLEX PDP oils are neutral
long-term oils based on ester oil. towards metals. Due to the great • Synthetic long-term oils
They show a good viscosity-tem-
perature behavior, a high flash
variety of different elastomers and
plastics, their compatibility with
• Wide service temperature
range
point, a low pour point, good age- these oils has to be checked prior to
ing and oxidation stability as well series application. • Low pour point
as corrosion protection. Compared ISOFLEX PDP oils are miscible with • Good viscosity-temperature
to mineral oils, they hardly change mineral oils. However, we recom- behavior
their viscosity at low or high tem- mend removing the used oil from
peratures thus ensuring less the lubrication point in order to fully
• Oxidation and ageing stability
decrease in performance and utilize the performance of these oils. • Good corrosion protection
reduced power consumption.
Minimum shelf life

Application Current material safety data sheets
The minimum shelf life in the closed
ISOFLEX PDP oils are ideally suited original container in a dry place is can be downloaded from our
for lubrication points which have to approx. 60 months. website www.klueber.com or
meet high demands and show a requested from Klüber Lubrication.
long service life. They can be used
for rolling bearings subject to high Pack sizes
thermal and static loads, even at
1 l canister
high speeds, plain bearings, guides
20 l canister
in communication equipment, radio-
probes, precision and measuring
instruments, control systems,
turbines, synchronous motors and
elements with exacting tolerance in
the fields of telecommunication,
data systems and cryotechnology.
Furthermore, ISOFLEX PDP oils are
suitable for the impregnation of
sintered bearings and sintered
compacts.
ISOFLEX PDP 61 A Fernschreib. K

has been especially designed for
mechanically actuated friction points
in teletypewriters.
Product Information 5.324 Edition 11.00, replaces edition 04.00

Article number: 025006, 025007, 025008, 025010, 025011, 025012, 025014, 025016, en GS/ GA
ISOFLEX PDP
10, 38, 40, 48, 61 A Fernschreib. K, 65, 94, 300
Synthetic long-term oils
Product data:
Product Colour, aspect Density Service Kinematic Viscosity Flash Pour

DIN 51 757 temperatur viscosity index point point
(g/ml) e DIN 51 562 DIN ISO DIN ISO DIN ISO
at 20 °C range*, part 01 2909 2592 3016
approx. approx. (mm2/s), approx. °C °C
at °C, approx. approx.
approx.
40 100
ISOFLEX PDP 10 yellowish, clear 0.92 – 65 to 100 8 2.3 110 200 – 70
ISOFLEX PDP 40 yellowish, clear 0.92 – 50 to 100 19 5 230 200 – 55

ISOFLEX PDP 61 50 14
red, clear 0.92 – 45 to 100 200 180 – 50
A Fernschreib. K
ISOFLEX PDP 65 yellowish, clear 0.92 – 50 to 100 68 17 245 200 – 55
* Service temperatures are guide values which depend on the lubricant’s composition, the intended use and the application method. Lubricants change their consistency, apparent dynamic
viscosity or viscosity depending on the mechano-dynamical loads, time, pressure and temperature. These changes in product characteristics may affect the function of a component.
The data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a
reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the
selected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample
for testing. Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this product information at any time
without notice.
Klüber Lubrication, a member of the Freudenberg Group
Publisher and Copyright: Reprints, total or in parts, are permitted if source Klüber Lubrication München KG
Klüber Lubrication München KG is indicated and voucher copy is forwarded. Postfach 70 10 47, D-81310 München
Tel. (0 89) 78 76-0, Telex 5 23 131, Telefax (0 89) 78 76-333

Isoflex PDP Series

Uploaded by

Copyright:

Available Formats

Isoflex PDP Series

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Isoflex PDP Series

Uploaded by

Copyright:

Available Formats

ISOFLEX PDP

10, 38, 40, 48, 61 A Fernschreib. K, 65, 94, 300

Description Application notes

Minimum shelf life

ISOFLEX PDP 61 A Fernschreib. K

Product Information 5.324 Edition 11.00, replaces edition 04.00

Product Colour, aspect Density Service Kinematic Viscosity Flash Pour

ISOFLEX PDP 10 yellowish, clear 0.92 – 65 to 100 8 2.3 110 200 – 70

ISOFLEX PDP 38 yellowish, clear 0.92 – 65 to 100 12 3.2 125 200 – 70

ISOFLEX PDP 40 yellowish, clear 0.92 – 50 to 100 19 5 230 200 – 55

ISOFLEX PDP 48 yellowish, clear 0.92 – 45 to 100 30 7.9 240 200 – 50

Klüber Lubrication, a member of the Freudenberg Group

You might also like