Scribd
Upload
224 views1 page

PaperCALCOPRINT EN

This document describes Calcoprint paper, which makes the process of producing photoceramics much easier. Calcoprint paper allows direct printing of images onto ceramics without requiring further covercoating or laminating steps. The printed image on Calcoprint paper can be applied to ceramics and fired using a provided firing cycle of 5 hours from 20C to 350C, 4 hours from 350C to 890C, and 30 minutes at 890C.

Uploaded by

IzzHyuk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
224 views1 page

PaperCALCOPRINT EN

This document describes Calcoprint paper, which makes the process of producing photoceramics much easier. Calcoprint paper allows direct printing of images onto ceramics without requiring further covercoating or laminating steps. The printed image on Calcoprint paper can be applied to ceramics and fired using a provided firing cycle of 5 hours from 20C to 350C, 4 hours from 350C to 890C, and 30 minutes at 890C.

Uploaded by

IzzHyuk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Strada Volpiano, 51

10040 Leini (Torino), Italia


Tel.: +39 011 9978444 – mob.: +39 346 3809985
e-mail: [email protected] – www.balteadc.it

Paper CALCOPRINT
The process of the production of Phtotoceramics is much more easier with

CALCOPRINT Paper. You don’t need any further covercoating or laminating. Just

print your image on Calcoprint paper, apply it on the ceramics and fire.

Apply the decal on the ceramics in the same way

as if it was covercoated or laminated. No

unpleasant smell, no additional time for drying,

no cleaning of the screen!

Firing Cycle:
From 20°C to 350°C 5 hours
From 350°C to 890°C 4 hours
At 890°C 30 minutes

You might also like