1

©2019 TP-Link 7106508258 REV6.1.0

Power On
Plug the extender into a power outlet next to your router. Wait until its
Power LED turns solid on.

Quick Installation Guide

Range Extender
TL-WA850RE
Next to

Need setup videos? Solid On

Scan the QR code, or visit
https://www.tp-link.com/download/TL-WA850RE.html

2 Set Up
Method 1: Via the WPS Button Method 2: Via the Tether App Method 3: Via a Web Browser
1. Press the WPS button on your router. 1. Get the up-to-date Tether app. 1. Connect your computer or smartphone to the
extender’s network TP-Link_Extender. If you are
or using a computer, unplug the Ethernet cable if any.

The WPS button might

look like one of these: Scan for Tether Tether Connections are available

Wireless Network Connection

2. Connect your smartphone to the extender’s
network TP-Link_Extender. TP-Link_Extender
√ Connect automatically Connect

2. Within 2 minutes, press the WPS button on the < Settings Wi-Fi
extender for 1 second. The RE LED should change
2. Launch a web browser, and enter
from blinking to solid on, indicating successful Wi-Fi
http://tplinkrepeater.net or http://192.168.0.254
connection. CHOOSE A NETWORK...

TP-Link_Extender in the address bar. Create a password to log in.

Note: If the LED does not turn solid on, try again or use Method 2
or 3.
Other... Note: If the login window does not appear, refer to FAQ > Q1.
3. Launch the Tether app, and select your extender.
Create a password to log in. http://tplinkrepeater.net

Create Password
My Devices Low Middle High

Confirm Password
Local Device

WA850RE
Blinking Solid On XX-XX-XX-XX-XX-XX
Start

3. The extender uses your router’s network name 4. Follow app instructions to complete the setup. 3. Follow web instructions to complete the setup.
with _EXT at the end, and shares the same The RE LED should turn solid on, indicating The RE LED should turn solid on, indicating
password as your router. successful connection to your router. successful connection to your router.
Note: If you want to change the extended network name, refer to Note: If the LED does not turn solid on, refer to FAQ > Q2. Note: If the LED does not turn solid on, refer to FAQ > Q2.
Access Extender Settings on the back page.

Extended Network Name:

Router’s network name with _EXT at the end
Password:
Same as your router

Solid On Solid On

3 Relocate Best
5
4
3 Good ≥ 3 LEDs light up
2
1

1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your router.

2. Wait for about 2 minutes until 3 or more LEDs light up. If not, relocate the
Router Devices
extender closer to the router to achieve better signal quality. Halfway

Tip: For more intuitive location assistant, access extender settings via the Tether app and go to Tools > Location Assistant.

Enjoy!
Smartphone Tablet Laptop
Connect your devices to the extender wirelessly or via an Ethernet cable, then
enjoy the internet.
Tip: You can also set up the extender in Access Point mode to transform your existing wired network
Smart TV Game Console Desktop
to a wireless one. For details, refer to the user guide at https://www.tp-link.com/support.
Access Extender Settings LED Explanation
After setup, you can access extender settings via any of the methods below.
You can reselect host network, change extended network settings and more.
Note: If your extender and router use the same network name, Method 1 is recommended.

Method 1: Via the Tether App

5
4
3
2
1
Tether

LED Status Indication (For Range Extender Mode)

1. Connect your smartphone to the extender‘s or router’s network.
2. Launch the Tether app, select your extender, and log in. The extender is connected or not connected to
On/Off
3. View or change extender settings as needed. RE your router’s wireless network.
Blinking WPS connection is in progress.

Method 2: Via a Web Browser Wireless On/Off

The extender’s wireless function is enabled or
disabled.

http://tplinkrepeater.net
http://tplinkrepeater.net On/Off The extender is on or off.
Power
The system is starting up or firmware upgrade is in
Blinking
progress.

Indicates the Wi-Fi connection between the

1. Connect your computer or smartphone to the extender’s network. If you (Signal On/Off extender and the router. More lit LEDs indicates a
are using a computer, unplug the Ethernet cable if any. Strength) better signal strength.
2. Launch a web browser, enter http://tplinkrepeater.net in the address bar,
and log in.
The Ethernet port is connected or not connected
Note: If the login window does not appear, refer to FAQ > Q1. Ethernet On/Off
to a powered-on device.
3. View or change extender settings as needed.

Q1. What should I do if I cannot access the extender’s web Q3. How do I reset the extender?
management page? With the extender powered on, use a pin to press the RESET button for 1
Make sure your computer or smartphone has connected to the extender’s second. The extender will reboot.
network, and not that of your router. If your router and extender share the same
network name, connect your computer to the extender via an Ethernet cable, or
use the Tether app.
If you are using a computer, make sure it is set to obtain an IP address and DNS
server address automatically.
Verify that http://tplinkrepeater.net or http://192.168.0.254 is correctly entered
in the web browser and press Enter. Note that http://192.168.0.254 applies only
for extenders with factory default settings.
Use another web browser and try again. RESET

Reboot or reset the extender and try again.

If you are still having problems, contact our technical support.

Q2. What should I do if the RE LED doesn’t turn solid on after Safety Information
completing setup via the Tether app or web browser? Keep the device away from water, fire, humidity or hot environments.
You may have entered incorrect Wi-Fi password for your host router during the Do not attempt to disassemble, repair, or modify the device.
configuration. Check the password and try again.
Do not use the device where wireless devices are not allowed.
Make sure the extender is close to your router, preferably within 16 feet, and
The socket-outlet shall be installed near the equipment and shall be easily accessible.
away from large electrical appliances.
If you have enabled wireless MAC filtering, wireless access control, or access Please read and follow the above safety information when operating the device. We cannot
control list (ACL) on your router, disable them first, then follow any method on the guarantee that no accidents or damage will occur due to improper use of the device.
front page to complete the configuration. Please use this product with care and operate at your own risk.
Try setting up via the WPS button.
TP-Link hereby declares that the device is in compliance with the essential requirements
Reset the extender and go through the configuration again. and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.
If you are still having problems, contact our technical support. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

For technical support, the user guide and other information, please
visit https://www.tp-link.com/support, or simply scan the QR code.