Active@ Password Changer

User Guide
 Copyright © 1999-2017, LSOFT TECHNOLOGIES INC. All rights reserved. No part of this documentation may be
reproduced in any form or by any means or used to make any derivative work (such as translation,
transformation, or adaptation) without written permission from LSOFT TECHNOLOGIES INC.
LSOFT TECHNOLOGIES INC. reserves the right to revise this documentation and to make changes in content
from time to time without obligation on the part of LSOFT TECHNOLOGIES INC. to provide notification of such
revision or change.
LSOFT TECHNOLOGIES INC. provides this documentation without warranty of any kind, either implied or
expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular
purpose. LSOFT may make improvements or changes in the product(s) and/or the program(s) described in this
documentation at any time.
All technical data and computer software is commercial in nature and developed solely at private expense. As
the User, or Installer/Administrator of this software, you agree not to remove or deface any portion of any
legend provided on any licensed program or documentation contained in, or delivered to you in conjunction
with, this User Guide.
Active@ Password Changer, the Active@ Password Changer logo and Active@ Password Changer Software are
trademarks of LSOFT TECHNOLOGIES INC.
The LSOFT.NET logo is a trademark of LSOFT TECHNOLOGIES INC.
Other brand and product names may be registered trademarks or trademarks of their respective holders.

2 Active@ Password Changer User Guide

 Contents
1 Product Overview 4
2 Operating Procedures 5
2.1 Program Start and Search Options .....................................................................................5
2.2 SAM Selection ....................................................................................................................7
2.3 Local User Account Selection..............................................................................................9
2.4 Change Account's Password and Attributes ......................................................................10
3 Knowledge Base 13
3.1 Sales Questions ...............................................................................................................13
3.2 Technical Questions .........................................................................................................14

3
1 Product Overview
Active@ Password Changer is a solution designed for resetting local user
password and account attributes on Windows NT / 2000 / XP / Vista / 2003 /
2008 / 2012 /Windows 7 / Windows 8 and Windows 10 systems in case of
Administrator’s password is forgotten, lost or user account has been blocked,
disabled or locked out. You do not need to re-install and re-configure
operating system in this case. With Active@ Password Changer you can log
in as a particular user with an empty password.
Active@ Password Changer also provides the ability to manage with days
and times of the week that the user account is permitted to log on to the
computer, which is useful for preventing the logging on for account you
choose (or remove that kind of prohibition). For example, you can define in
what hours your child can logon to the computer. This software has simple
wizard-like user interface, supports multiple hard disk drives, is able to
detect several SAM databases (in case if multiple OS were installed on one
volume) and pick up the right one before starting recovery process. List of
local users is displayed; you should choose the one to reset password or
parameters. It can reset User is Disabled flag, Account is locked out flag,
User must change password flag and sets Password never expires to avoid
possible user blocking after password has been reset. Moreover you can
create a Registry (SAM) backup before resetting user’s passwords/attributes,
and you can restore user’s attributes later on back to the original state.
Demo version allows you to detect proper SAM database, view the user list
and particular user attributes.
Professional version actually resets passwords and changes attributes.
FAT16 / FAT32 / NTFS / NTFS5 file systems are supported. Windows NT /
2000 / XP / Vista / 2003 / 2008 / 2012 / Windows 7/ Windows 8 and
Windows 10 operating systems are supported for password recovery, both
32 and 64-bit MS Windows operational systems are supported.
2 Operating Procedures
2.1 Program Start and Search Options

Start Active@ Password Changer:

 from the Start menu

 from the command line:

 Windows: go to the directory where software is located and type:

> PasswordChanger.exe

 Linux: go to the directory where software is located and type:

> sudo ./PasswordChanger

In Linux software must be launched under Super User account

Welcome screen appears:

Program starts and you can read short explanations, on the next page of the Password Changer wizard
you will see the following options:

Program starts and you can read short explanations, on the next page of the Password Changer wizard
you will see the following options:

You can either choose a particular logical drive to search SAM database on, or choose to search on all
hard disks and logical drives. If it is impossible to reach a Windows system drive directly you can copy
SAM hive file from “C:/Windows/System32/Config” folder to a flash drive (or other external drive), then
attach this drive to you computer and reset the password in this SAM file with the third option.
Click Next to go to the next step.

6 Active@ Password Changer User Guide

If you choose the second option, you need to specify the drive to search SAM database on:

Choose a drive and click Next to go to the next step.

2.2 SAM Selection

SAM (Security Access Manager) - a database where information about local users, their rights and
passwords is stored.
If several SAM databases found - you need to choose a proper SAM database to reset proper account
password and attributes. Normally SAM is located on a drive where operating system is installed in the
folder :\WINDOWS\SYSTEM32\CONFIG.

Active@ Password Changer User Guide 7

 Note: Please do NOT try to change account attributes for the operating system currently
running (which SAM is located on the same drive from where the Windows is started). It
is not possible, see the note below. To change account attributes and reset the
password you either need to boot from bootable CD running Windows PE, or attach
another HDD having Windows installed and boot from there.

Important
As long as you need to change system account attributes, drive where SAM is found must be locked
exclusively before changing. Exclusive lock means that no one (including Windows) except Active@
Password Changer has full access to the account. This also means that if you try to change local
account attributes for the system currently running, you will NOT be granted exclusive access to the
drive and will not be able to reset account attributes. The following messages might appear:

or

8 Active@ Password Changer User Guide

If selected drive cannot be unlocked by some reasons, current system drive is used by operating
system, for example, User Account parameters will be opened in Read Only mode.

2.3 Local User Account Selection

After you've chosen SAM database you will see the list of local user accounts with descriptions:

Choose a Local User Account to reset password and attributes for and click Next to go to the next
step.

Note: Primary Administrator's account (even if renamed) is always placed on the first place
and has icon.

Other Administrator accounts are marked with icon.

Active@ Password Changer User Guide 9

 Non-Administrator accounts (Users, Guests, etc...) are marked with icon having blue
background.

Disabled/Locked accounts are marked with a cross.

2.3.1 Select Registry SAM file Backup folder

If you like to save backup copy of Registry SAM file, you have to press Select folder to backup
Registry to… button and select a desire save place such as external HDD or Flash drive:

Path to selected backup will be pointed at the bottom of this page and on the next step where you can
change selected account parameters.

2.4 Change Account's Password and Attributes

After you've chosen the Local User Account you will see account description and attributes:

10 Active@ Password Changer User Guide

In the left column you can see the account's current existing attributes.
In the right column you can set new values for these attributes. Default values are acceptable for most
cases and guarantee to be able to logon to the system without password.
To reset Account's password - make sure that Clear this User's Password option is selected.
To agree to save backup Registry SAM copy - just check Backup to: checkbox or uncheck it otherwise.
Click Apply to store changes back to the SAM database. You'll be asked for action confirmation:

Active@ Password Changer User Guide 11

Click Yes to change the SAM file and go to final wizard page:

Click Finish to finish the Wizard and exit the program.

Note: If Logon Hours limitations exist for the particular account you'll see the Logon Hours
button and would be able to change the Logon Hours limitations.

Specify logon hours, click OK to close the dialog and Save account's attributes.

Note: If you set path for Registry SAM backup file and set mark in checkbox Backup to: the
final page will show full path and name for the backup file.
12 Active@ Password Changer User Guide
Backup file name has a timestamp at the end: YYYYMMDDhhmmss
where YYYY – year, MM – month, DD – day, hh – hour, mm – minutes, ss – seconds
when this backup SAM file was saved.

Active@ Password Changer User Guide 13

3 Knowledge Base
3.1 Sales Questions

How to buy your products without a credit card? What are

the payments terms?

The preferred method to order for our software is through online ordering using a credit
card. Using this way you can download the software instantly without any delays saving
you much precious time. Software download link is sent via email.

If you wish to pay without a credit card you can send us a Bank Money Order, Certified
Cheque, PO (on orders of 500$ US or more), Bank Money Transfer along with the
completed order form which you can download by clicking the link below:
www.password-changer.com/downloads/OrderForm.pdf

Usually it takes up to 10 business days to complete your order offline using this method.

For additional information click here:

www.password-changer.com/orderfax.htm

How is your product delivered?

All our password recovery products are delivered electronically online only. So there are
no shipping charges. After order completion the invoice and software download
instructions are sent to the email address provided during the registration process within
a few minutes of registering. After payment, the software can be immediately
downloaded via our Web-store.

Is there a way to re-download the purchased copy of

Active@ Password Changer and install it again?

You can download your licensed software again anytime within support period using our
Clients Center free of charge: https://secure.lsoft.net/clients/
 What do I need to do to get the latest software updates for
Active@ Password Changer?

You can get latest software updates for Active@ Password Changer from our Clients
Center by clicking the following link: https://secure.lsoft.net/clients/

3.2 Technical Questions

I do not have Administrator account on my logon screen in

Windows 10 (or 8 or 7 or Vista). Does this account exist in
my system?

Built-in Administrator account is created in Windows 10, 8, 7 or Vista, but it disabled by

default and you can’t see it and use it. If you have to troubleshoot something in your
system and cannot logon to your operating system with any other account you can
enable it with our Active@ Password Changer as it described in the manual above.
Remember – built-in Administrator account is always placed in the first row in the User
Account list.
You can disable this Administrator account later after you do not need it anymore. You
can use Password Changer again to do that or just open a command prompt in your
system and type the following command:
net user administrator /active:no
If you decided to leave the Administrator account enabled do not forget to assign a
password to it.

I've saved backup Registry SAM file as

SAM20160315230333 in my flash drive. Why do I need it?

If your system became inoperable after you use Active@ Password Changer you can roll
back all changes to the square one. To do this you have to:
1. Boot your computer with our Active@ Boot Disk (with Password Changer).
2. Run Boot Disk Explorer (Start -> Utilities ->Explore My Computer).
3. Find the folder "C:\WINDOWS\System32\config".
4. Move file "sam" from this folder to any temporary folder - "C:\Temp" for
example.
5. Copy your backup file from the flash drive (or other storage where you have
it) to folder "C:\WINDOWS\System32\config"

Active@ Password Changer User Guide 15

 6. Rename backup Registry file to SAM (just remove numbers at the end of the
file name).
7. Reboot your computer.

I'm unable to find user Administrator in the list of the

users after selection of proper SAM database in Active@
Password Changer. Where it is?

Most likely local account Administrator has been renamed due to security reasons.
Active@ Password Changer always displays built-in Administrator's account on top (even
it was renamed). Write down this account name to be able to type it in later on, after its
password has been reset.

Will the User Profile be saved, after user's password has

been reset?

User Profile depends on User Name and Security ID (SID) so it cannot be spoiled by
changing the user's password.

Will the file restrictions be saved, after user's password

has been reset?

File and folder security settings are based on User Security ID (SID) that is produced
during user account creation and does not depend on user password. You can change
your password as often as you wish without files/folders security settings changes.

Can Password Changer help me in meeting the complexity

requirements (such as digits, small and capital letters, and
length of password) set by the PC's Local Security policy?

Local Security Account Policy affects the new passwords setting process in Windows
environment, but not existing passwords, even absolutely empty ones. So you can reset
the password for this account with Active@ Password Changer then logon with this user
account name with the empty password.

16 Active@ Password Changer User Guide

 I have erased the password using Active@ Password
Changer on a system where the administrator is no longer
with the company. The system is a NON ENGLISH
(localized) version of Windows 2000. The Password
Changer gave a message saying that the password was
changed, but system is still asking me to type the
password ("Wrong username or password").

It is possible that the Administrator account in your localized version is renamed (for
example Administrateur in French version), or has national (non English) symbols. Try to
start Active@ Password Changer and find out the real username for Administrator
account. It has to be first in the user’s list with RID = 000001f4. Write down this
username and use it for login.

I've reset local Administrator's password, but after re-boot

on Welcome Screen I do not see user Administrator, just
list of regular users. I have Windows XP. How can I log in
as Administrator?

Operating System Windows XP (Home and Professional Editions) when booting suggests
only names of regular users on Welcome Screen by default. Administrator's account is
hidden. Press key combination Ctrl+Alt+Del two times to display Login Dialog Window
and you will be able to type both user name and password. Type Administrator and
use empty password.

Active@ Password Changer User Guide 17