Scribd
Upload
273 views5 pages

Cantilever-Retaining-Wall-Staad Input File

This document provides information to analyze the retaining wall of a foundation including: - The height of the retaining wall is 5.60 m - The soil density is 18 kN/cum - Loads include soil pressure from the backfill and base, a live floor load, and hydrostatic pressure from 2.76 m of water - The analysis is performed to check the stability of the retaining wall and foundation

Uploaded by

Mukesh Jangid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
273 views5 pages

Cantilever-Retaining-Wall-Staad Input File

This document provides information to analyze the retaining wall of a foundation including: - The height of the retaining wall is 5.60 m - The soil density is 18 kN/cum - Loads include soil pressure from the backfill and base, a live floor load, and hydrostatic pressure from 2.76 m of water - The analysis is performed to check the stability of the retaining wall and foundation

Uploaded by

Mukesh Jangid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 5

Height of retaining Wall = = 5.

60 m
Density of Soil = = 18.00 KN/cum
Height of foundation= = 1.00 m
Coefficient of Active Earth Pressure = 0.5
f = 18 °
Earth Pressure at rest K0 = (1-sinf ) = = 0.691
Density of water = = 10 KN/cum
Height of water = 2.76 m
12.438
STAAD SPACE
START JOB INFORMATION
END JOB INFORMATION
INPUT WIDTH 79
UNIT METER KN
JOINT COORDINATES
1000 1000 1 0.000 0.000 0.000
2 0 5.6 0 2 0 5.6 0 2 0.000 5.600 0.000
3 -1.25 0 0 3 -1.25 0 0 3 -1.250 0.000 0.000
4 2.11 0 0 4 2.11 0 0 4 2.110 0.000 0.000
5 0 0.28 0 5 0 0.28 0 5 0.000 0.280 0.000
MEMBER INCIDENCES
115 115 1 1 5
231 231 2 3 1
314 314 3 1 4
452 452 4 5 2
DEFINE MATERIAL START
ISOTROPIC CONCRETE
E 2.17185e+007
POISSON 0.17
DENSITY 23.5616
ALPHA 1e-005
DAMP 0.05
TYPE CONCRETE 1 4 PRIS YD 0.396 ZD 1
STRENGTH FCU 27579 2 3 PRIS YD 0.36 ZD 1
END DEFINE MATERIAL
MEMBER PROPERTY
1 TO 4 PRIS YD 0.56 ZD 1 0.56
CONSTANTS
MATERIAL CONCRETE ALL
SUPPORTS
1 FIXED
LOAD 1 LOADTYPE Dead TITLE DL
SELFWEIGHT Y -1 LIST ALL
LOAD 2 LOADTYPE Soil TITLE BACKFILL
MEMBER LOAD
4 TRAP GX -95.76 0 0 4 TRAP GX -95.76 0 0 95.76 0.000
LOAD 3 LOADTYPE Soil TITLE BASE
MEMBER LOAD
3 UNI GY -95.76 3 UNI GY -95.76 95.76
2 UNI GY -18 2 UNI GY -18 18
LOAD 4 LOADTYPE Soil TITLE FLOOR SIDE
MEMBER LOAD
4 TRAP GX 18 0 0 1 4 TRAP GX 18 0 0 1 18 0.000
LOAD 5 LOADTYPE Live TITLE LL
MEMBER LOAD
4 UNI GX -14.93 4 UNI GX -14.93 14.9256 0.000
LOAD 6 LOADTYPE Live TITLE LL
MEMBER LOAD
4 TRAP GX 27.6 0 1 2.76 4 TRAP GX 27.6 0 1 2 27.6 0.000
PERFORM ANALYSIS PRINT ALL
FINISH
3.36
2.110
2.67

0.000

0.000 1.00

0.000

1.000 2.76

You might also like