Anchor Systems: Hilti. Outperform. Outlast

Anchor Systems
Hilti. Outperform. Outlast.

Anchor Systems
www.hilti.com.ph | 02-784 7100 www.hilti.com.ph | 02-784 7100 07 Anchor Systems 159

Anchor Systems Anchor Systems
160 07 Anchor Systems www.hilti.com.ph | 02-784 710007 Anchor Systems www.hilti.com.ph | 02-784 7100
Anchor Systems
www.hilti.com.ph | 02-784 7100 07 Anchor Systems 161

Anchor Systems
162 07 Anchor Systems www.hilti.com.ph | 02-784 7100

Anchor Systems

Anchor Systems

Anchor Systems
Simply connected.
Hilti solutions for post-installed rebar connections.
For a lasting bond. 7
Planting a tree is really quite easy. Use the right tool to dig a suitably-sized hole, cle-
an out the surplus earth and place the tree in the hole. If you then give the young tree
enough water it will take root and safely withstand all kinds of stress and strain, pos-
sibly even for hundreds of years. With the Hilti solution, making post-installed rebar
connections is just as easy.
Dig the hole. As secure as cast-in bars.

For dependable concrete connections you should rely only on Hilti’s
well-proven and approved injectable adhesive
mortars, simple but effective hole-cleaning aids
and powerful rotary hammer drills.
Hilti’s highly experienced technical

specialists are at your service round
the clock and will be pleased to an-
Clean out the hole.
swer any questions. You thus have
permanent access to over 25 years
of practical experience in the field of
post-installed rebar connections – ex-
perience that will help you achieve
extremely reliable connections
and maximum cost
efficiency.
Plant the tree and water it properly.

Anchor Systems
It holds what it promises.
8JUIUIF)JMUJTPMVUJPO NBLJOHQPTUJOTUBMMFESFCBSDPOOFDUJPOTJTKVTUBT
FBTZBTQMBOUJOHBUSFF
'BTU %SJMMUIFIPMFRVJDLMZVTJOHB)JMUJ
5IFMFHFOEBSZ)JMUJDPNCJIBNNFSTBOESPUBSZIBNNFSTQMVTIJHIMZFGGJDJFOU DPNCJIBNNFSBOETVJUBCMFESJMMCJUT
)JMUJEJTQFOTFSTMFUZPVXPSLGBTUFSࡪGPSMPOHFS
&BTZ
1SPQFSIPMFDMFBOJOHJTEFDJTJWF8JUIUIF)JMUJ1SPGJ3FCBSTFUTZPVIBWFBMMUIF
SFCBSJOTUBMMBUJPOBDDFTTPSJFTZPVOFFEDPOWFOJFOUMZBUIBOE
3FMJBCMF $MFBOUIFIPMFUIPSPVHIMZVTJOHUIF
1PTUJOTUBMMFESFJOGPSDJOHCBSTTFUJO)JMUJ)*5BSFBTTFDVSFBOESFMJBCMFBT DMFBOJOHBJETGSPNUIF)JMUJQSPGJSFCBSTFUT
DBTUJOSFCBST"DDPSEJOHMZ )JMUJ)*5TZTUFNTIBWFCFFOPGGJDJBMMZBQQSPWFE
GPSUIFBQQMJDBCMFBQQMJDBUJPOT
+PJOUIF)JMUJ)*5QSPGFTTJPOBMT
)JMUJQSPWJEFTTQFDJBMUSBJOJOHPOUIFVTFPG)JMUJ)*5TZTUFNTGPSQPTUJOTUBMMFE
SFCBSDPOOFDUJPOT
The complete system for *OKFDU)JMUJ)*5NPSUBSDPOWFOJFOUMZBOE

post-installed rebar connections. JOTUBMMSFCBSTSFMJBCMZ
PROFIS Rebar PS 200 Ferroscan TE 70-ATC HIT Profi Rebar sets DAG 125 HIT-HY 200 HIT-RE 500
software combihammer angle grinder injection system injection system

Anchor Systems
Adhesive Capsule Anchor System

HVU
Flexibility in heavy duty fastenings.
Features and Benefits Fields of Application

Flexible foil capsule instead of glass: A robust product for real High load values for threaded rod and rebar for a broad range of
job site conditions applications like heavy duty fastenings in non-cracked concrete
One System for all Applications: A multitude of adhesive (steel structures, machinery, crash barriers, curtain wall structures,
capsules, anchor rods, internally threaded sleeves in various railings, etc.)
diameters and lengths
No expansion forces on concrete allows usage in applications Base Material
with small edge distance and/or anchor spacing Concrete (non-cracked), Stone (hard natural)
Fast curing for high productivity and fast threaded rod usage
Arrowhead shaped capsules don’t drop out of overhead holes
1 2 3 4
7
5 trel 6 tcure 7
Please ask for delivery details

Ordering
Order Description Hole depth Drill bit diameter Package quantity Item Number
Adhesive capsule HVU M8X80 80 mm 10 mm 10 pc 00256691


Anchor Systems
Threaded Anchor Rod

HAS-E
Galvanized min. 5µm

Material: Steel grade 5.8
Order Description Drill bit diameter Hole depth Thickness fastened range Package quantity Item Number
Anchor rod HAS-E M8X80/14 10 mm 80 mm 14 mm 20 pc 00332219


Anchor Systems
5ISFBEFE"ODIPS3PE
)"4&3
4UBJOMFTTTUFFMSPET "
1MFBTFBTLGPSEFMJWFSZEFUBJMT
.BUFSJBM4UBJOMFTTTUFFM"
0SEFS%FTDSJQUJPO %SJMMCJUEJBNFUFS )PMFEFQUI 5IJDLOFTTGBTUFOFESBOHF 1BDLBHFRVBOUJUZ *UFN/VNCFS
"ODIPSSPE)"4&3.9 NN NN NN QD

"ODIPSSPE)"4&3.9 NN NN NN QD 7
5ISFBEFE"ODIPS3PE
)"4&'
)PUEJQQFEHBMWBOJ[FE uN
.BUFSJBM4UFFMHSBEF
0SEFS%FTDSJQUJPO %SJMMCJUEJBNFUFS )PMFEFQUI 5IJDLOFTTGBTUFOFENBY 1BDLBHFRVBOUJUZ *UFN/VNCFS
"ODIPSSPE)"4&'.9 NN NN NN QD

"ODIPSSPE)"4&'.Y NN NN NN QD

Anchor Systems
Order Description Drill bit diameter Hole depth Thickness fastened - max Package quantity Item Number
Anchor rod HAS-E-F M16X125/348 18 mm 125 mm 348 mm 10 pc 00333157

Threaded Sleeve Element

HIS-N

Material: Carbon steel
Order Description Drill bit diameter Hole depth Package quantity Item Number
Int. threaded sleeve HIS-N M8X90 14 mm 90 mm 10 pc 00258015

Threaded Sleeve Element

HIS-RN

Material: Stainless steel A4-70 (1.4401)
Order Description Drill bit diameter Hole depth Package quantity Item Number
Int. threaded sleeve HIS-RN M8X90 A4 14 mm 90 mm 10 pc 00258024


Anchor Systems
Setting tools for HAS-E and HIS-N
• Diameters M27 to M39
+
HAS-E/ -EF/ -ER 3/4" - Sw TE-FY 3/4"
M27 to M39 M27 (Sw = 41) TE 60 to TE 70/TE 70 ATC
M30 (Sw = 46)
(drilling mode)
M33 (Sw = 50)
M36 (Sw = 55)
M39 (Sw = 59)
• Setting tools for HIS-N/RN M8 to M20 +

1/2" - Sw TE-C 1/2"
M 8 (Sw = 13)
M10 (Sw = 17) TE 7 to TE 40
M12 (Sw = 19) (drilling and hammering)
HIS-N/-RN HIS-S
M8 to M20 M8 to M20
+
3/4" - Sw TE-FY 3/4"
M16 (Sw = 24) TE 60 to TE 70/TE 70 ATC
M20 (Sw = 30) (drilling and hammering)

Anchor Systems
"EIFTJWF"ODIPS4ZTUFN
)765;
5IF놕STUBEIFTJWFBODIPSXJUIGPJMDBQTVMFTVJUBCMFGPSVTFJODSBDLFEDPODSFUF
'FBUVSFTBOE#FOF녠UT 'JFMETPG"QQMJDBUJPO
)7;DPNCJOFTIJHIFTUQFSGPSNBODFJODIFNJDBMBODIPSTXJUI )FBWZEVUZGBTUFOJOHTJOTUFFMTUSVDUVSFT NBDIJOFSZ DSBTI
BOVOQBSBMMFMFEMFWFMPGTBGFUZ CBSSJFST DVSUBJOXBMMTUSVDUVSFT SBJMJOHT
0GGFSTBMMSPVOE놖FYJCJMJUZJOBQQMJDBUJPOBOEJOTUBMMBUJPO 4VJUBCMFGPSEZOBNJDMPBEJOHTVCKFDUUPGBUJHVF TIPDLBOE
*OTFOTJUJWFUPGSFRVFOUMZNBEFBQQMJDBUJPOFSSPST TFJTNJDBDUJWJUZ
FHQPPSIPMFDMFBOJOH $BOCFVTFEJOUIFDSBDLFEUFOTJPO[POFPGDPODSFUFDPNQPOFOUT
'MFYJCMFGPJMDBQTVMFJOTUFBEPGHMBTT
)"435;SPETBSFBWBJMBCMFJOWBSJPVTHSBEFTPGTUFFMFOTVSJOH #BTF.BUFSJBM
WFSTBUJMJUZGPSBXJEFSBOHFPGBQQMJDBUJPOT
$PODSFUF
)JHIMPBEJOHJODSBDLFEDPODSFUF FWFOJOTNBMMFEHFEJTUBODFT
BOETQBDJOH
0SEFSJOH
0SEFS%FTDSJQUJPO "ODIPSTJ[F )PMFEFQUI %SJMMCJUEJBNFUFS 1BDLBHFRVBOUJUZ *UFN/VNCFS
"EIFTJWFDBQTVMF)765;. . NN NN QD


Anchor Systems
Anchor Rod
HAS-TZ

Order Description Hole depth Drill bit diameter Thickness fastened - max Package quantity Item Number
Anchor rod HAS-TZ M10X75/15 90 mm 12 mm 15 mm 10 pc 00310018

Anchor Rod
HAS-RTZ
7
Material: Stainless steel 1.4401 and 1.4571 EN 10088
Anchor rod HAS-RTZ M10X75/15 90 mm 12 mm 15 mm 10 pc 00310019


Anchor Systems
Setting Tool HEX

HVA / HVZ
Ordering
Order Description Package quantity Item Number
Setting tool TE-C HEX M8 1 pc 00311414

Setting tool TE-Y HEX M20 1 pc 00336420

Anchor Systems
)JHI1FSGPSNBODF*OKFDUJPO4ZTUFN
)*53&
5IFIJHIQFSGPSNBODFJOKFDUJPOBEIFTJWFTZTUFNGPSSFJOGPSDFNFOUCBSTBOEUISFBEFESPEBQQMJDBUJPOTJODPODSFUF
'FBUVSFTBOE#FOF녠UT 'JFMETPG"QQMJDBUJPO
0OFPGUIFTUSPOHFTUJOKFDUJPOTZTUFNTJOUIFNBSLFUXJUI&5" "OZIJHIQFSGPSNBODFDPODSFUFGBTUFOJOHTTVDIBTSFCBSDPOOFD
BQQSPWBMGPSSFEVDFESFCBSFNCFENFOUEFQUISBOHF UJPOTBOESFQBJSXPSL
/PFYQBOTJPOGPSDFTJODPODSFUFBMMPXGPSTFDVSFBQQMJDBUJPOT 'PSGBTUFOJOHPGUISFBEFESPE TPDLFUTBOESFCBSEJBNFUFSSBOHJOH
FWFODMPTFUPUIFFEHFTBOEPSXJUITNBMMTQBDJOH GSPNNNUPNNJOUPDPODSFUF
-PXTFOTJUJWJUZUPPWFSTJ[FE XFUIPMFTEVFUPOFHMJHJCMFTISJOL *EFBMTPMVUJPOGPSEJBNPOEDPSFEBOEXFUCPSFIPMFTPSPWFSTJ[FE
BHFBOEBEIFTJWFQSPQFSUZUIVTMFTTSJTLPGJOTUBMMBUJPOGBJMVSF IPMFT
-POHXPSLJOHUJNF UIFSFGPSFBMXBZTFOPVHIUJNFGPSBMJHOJOH 8FUPSVOEFSXBUFSBODIPSJOHBQQMJDBUJPOT
XPSLBOEJOTUBMMBUJPOPGCJHEJBNFUFSTBUEFFQFNCFENFOU
&BTZTFUUJOHJOBXJEFSBOHFPGUFNQFSBUVSFBOEMPOHXPSLJOH #BTF.BUFSJBM
UJNFFWFOBUFMFWBUFEUFNQFSBUVSF
$PODSFUF OPODSBDLFE
4UPOF IBSEOBUVSBM

0SEFSJOH
.BUFSJBM&QPYZBEIFTJWF
0SEFS%FTDSJQUJPO $POUFOUQFSDBODBSUSJEHF 1BDLBHFRVBOUJUZ *UFN/VNCFS
*OKFDUBCMFNPSUBS)*53&
NM QD
*OKFDUBCMFNPSUBS)*53&
NM QD

Anchor Systems
Threaded Anchor Rod

HIT-V

Material: Steel grade 5.8 / 8.8
Anchor rod HIT-V-5.8 M8X80 60 mm 10 mm 20 mm 20 00387054


Anchor Systems
5ISFBEFE"ODIPS3PE
)*573
.BUFSJBM4UBJOMFTTTUFFM"
0SEFS%FTDSJQUJPO )PMFEFQUI %SJMMCJUEJBNFUFS 5IJDLOFTTGBTUFOFENBY 1BDLBHFRVBOUJUZ *UFN/VNCFS
"ODIPSSPE)*573.9 NN NN NN

"ODIPSSPE)*573.9 NN NN NN 7
%ZOBNJD4FU
)7;)%"
0SEFSJOH
0SEFS%FTDSJQUJPO 1BDLBHFRVBOUJUZ *UFN/VNCFS
%ZOBNJDTFU. QD

%ZOBNJDTFU. QD
%ZOBNJDTFU. QD
%ZOBNJDTFU. QD

Anchor Systems
*OKFDUBCMF.PSUBS
)*5):4ZTUFN
5IFFYUSFNFMZSFMJBCMF IJHIQFSGPSNBODF GBTUDVSJOHNPSUBSGPSVTFJODSBDLFEBOEVODSBDLFEDPODSFUF
'JFMETPG"QQMJDBUJPO 5FDIOJDBM%BUB
"ODIPSJOHTUSVDUVSBMTUFFMDPOOFDUJPOT )*5):")*5):3
FHTUFFMDPMVNOT CFBNT
.BUFSJBMDPNQPTJUJPO )ZCSJEBEIFTJWFNPSUBS
4USVDUVSBMDPOOFDUJPOTXJUIQPTUJOTUBMMFESFCBST
*OTUBMMBUJPOUFNQFSBUVSFSBOHF ࡪp$ࡪp$
"ODIPSJOHTFDPOEBSZTUFFMTUSVDUVSFT
FHTUBJSDBTFT TUFFMMFEHFST
"QQSPWBMT &5" *$$&4
4USVDUVSBMSFOPWBUJPOVQHSBEFTXJUIQPTUJOTUBMMFESFCBST 'PSVTFXJUI )JMUJ)*57 )"4 )"4& )*4
4VCTUJUVUJPOPGNJTQMBDFENJTTJOHSFCBST 3FCBS );"3 )*5;
"ODIPSJOHSBJMJOHTTBGFUZCBSSJFST $MFBOJOHQSPDFEVSFT .BOVBMDMFBOJOH VQUPNN
IPMFEJBNFUFSBOEEFQUIPG
FNCFENFOUUJNFTSPE
'FBUVSFTBOE#FOFGJUT EJBNFUFS
PSDPNQSFTTFEBJS
/PIPMFDMFBOJOHSFRVJSFEXJUIUIFSFWPMVUJPOBSZOFX)*5; DMFBOJOHGPSTUBOEBSEBODIPS
BODIPSSPE SPET OPDMFBOJOHGPS)*5;
"VUPNBUJDIPMFDMFBOJOHXJUI5&$%BOE5&:%ESJMMCJUT BVUPNBUJDDMFBOJOHJO
DPOKVODUJPOXJUI5&$%
)JHIFTUBQQSPWFEMPBETBDDPSEJOHUPMBUFTUJOUFSOBUJPOBM
PS5&:%ESJMMCJUT
TUBOEBSET
3FCBSEJBNFUFSSBOHF ࡪNN
$VSJOHUJNFPQUJNJ[FEGPSBODIPSBQQMJDBUJPOTXJUI):"
BOESFCBSBQQMJDBUJPOTXJUI):3 3PEEJBNFUFSSBOHF ࡪNN
8PSLTMJLFDBTUJOXJUIQPTUJOTUBMMFESFCBST 4IFMGMJGF !p'p$BOE NPOUI T
4VJUBCMFGPSVTFJODSBDLFEBOEVODSBDLFEDPODSFUFXJUIBMM SFMBUJWFIVNJEJUZ
BODIPSSPETBOESFCBST .JYFSUZQFT 3&.
*OKFDUBCMFNPSUBS)*5):TZTUFN
0SEFSJOH
0SEFS%FTDSJQUJPO 4BMFTRVBOUJUZ *UFNOVNCFS
*OKFDUBCMFNPSUBS)*5):3 1$
6OJRVFTZTUFNUIBUFMJNJOBUFTUIFOFFEGPSTQFDJBMDMFBOJOH
%SJMMCJU 7BDDVNDMFBOFS "ODIPSSPE .BOVBMEJTQFOTFS $PSEMFTTEJTQFOTFS

5&$%5&:% 7$6 )*5; )%. )%&

Anchor Systems
Anchor Rod HIT-Z
Ordering
Description Rod diameter Rod length Bit diameter Pack size Item Number
HIT-Z M8x80 8 80 10 40
HIT-Z M8x100 8 100 10 40
HIT-Z M8x120 8 120 10 40
HIT-Z M10x95 10 95 12 40
HIT-Z M10x115 10 115 12 40
HIT-Z M10x135 10 135 12 40 !
HIT-Z M10x160 10 160 12 40
HIT-Z M12x105 12 105 14 20
HIT-Z M12x140 12 140 14 20
HIT-Z M12x155 12 155 14 20
HIT-Z M12x196 12 196 14 20
HIT-Z M16x155 16 155 18 12
HIT-Z M16x175 16 175 18 12
HIT-Z M16x205 16 205 18 12
HIT-Z M16x240 16 240 18 12 !
HIT-Z M20x215 20 215 22 6
HIT-Z M20x250 20 250 22 6
Anchor Rod HIT-Z-R
Ordering
7
Description Rod diameter Rod length Bit diameter Pack size Item Number
HIT-Z-R M8x80 8 80 10 40
HIT-Z-R M8x100 8 100 10 40
HIT-Z-R M8x120 8 120 10 40
HIT-Z-R M10x95 10 95 12 40
HIT-Z-R M10x115 10 115 12 40
HIT-Z-R M10x135 10 135 12 40
HIT-Z-R M10x160 10 160 12 40
HIT-Z-R M12x105 12 105 14 20 !
HIT-Z-R M12x140 12 140 14 20
HIT-Z-R M12x155 12 155 14 20
HIT-Z-R M12x196 12 196 14 20
HIT-Z-R M16x155 16 155 18 12
HIT-Z-R M16x175 16 175 18 12
HIT-Z-R M16x205 16 205 18 12
HIT-Z-R M16x240 16 240 18 12
HIT-Z-R M20x215 20 215 22 6
HIT-Z-R M20x250 20 250 22 6 !

Anchor Systems
%JTQFOTFS
)%.
5IFSPCVTU FBTZUPVTFEJTQFOTFSGPSFGGJDJFOUJOKFDUJPOPG)*5BEIFTJWFNPSUBSVOEFSBMMDPOEJUJPOT
'JFMETPG"QQMJDBUJPO 5FDIOJDBM%BUB
"EIFTJWFNPSUBSJOKFDUJPO )%.
%JTQFOTFSUZQF .BOVBM
'FBUVSFTBOE#FOFGJUT
'PSVTFXJUI $BSUSJEHFIPMEFST)*5$3PS
&BTZBOEGBTUGPJMQBDLMPBEJOH )*5$#
)JHIMZSFTJTUBOUUPUPVHIKPCTJUFDPOEJUJPOT
)JHIFGGJDJFODZFWFOBUMPXUFNQFSBUVSFT
0SEFSJOH
0SEFS%FDSJQUJPO 4BMFT2VBOUJUZ *UFN/VNCFS
%JTQFOTFS)%.CPY 1$
%JTQFOTFS)%.$3$# DBTF
$BSUSJEHFIPMEFS)*5$# 1$
$BSUSJEHFIPMEFS)*5$3 1$

Anchor Systems
Accessories
Dispenser HDM 330 box
Dispenser HDM 330 cas

Order Description Sales
Item Number
Quantity
Blow-out pump n n 1 PC 00060579
Round steel brush HIT-RB 10 n n 1 PC 00380917
Round steel brush HIT-RB 30 n n 1 PC 00380920 7

Brush extension HIT-RBH n n 1 PC 00229138
Brush extension HIT-RBV n n 1 PC 00238727
Brush extension HIT-RBS 10/0.7 n n 1 PC 00336645
Brush extension HIT-RBS-10/0.35 n n 1 PC 00371722
Cartridge holder HIT-CR 330 n n 1 PC 02007058
Cartridge holder HIT-CB 330 n n 1 PC 02007056

Anchor Systems
Dispenser
HDE 500-A22
Fast and effortless HIT chemical anchor injection.
Fields of Application Technical Data

n Ideal for serial applications: rebar or anchoring HDE 500-A22
n No need for external power source supply
Power source type Compact B22/1.6, B22/2.6 or
B22/3.3 battery pack
Features and Benefits Dispenser type Battery
n Easy injection even at low temperatures
n Dosing knob for better mortar consumption monitoring
n Easy and fast foil pack loading
n High battery capacity (up to 100 500ml-foil packs)
n Automatic presure release for no mortar wastage
n Robust design for all jobsite conditions
Ordering
Order Decription Sales Quantity Item Number
Cordless dispenser HDE-500-A22 box 1 PC 00000000

Anchor Systems
Accessories
Cordless dispenser HDE
Cordless dispenser HDE

500-A22 box
500-A22 cas
Item Number
Quantity
Blow-out pump n n 1 PC 00060579

7
Brush extension HIT-RBH n n 1 PC 00229138
Brush extension HIT-RBV n n 1 PC 00238727
Brush extension HIT-RBS 10/0.7 n n 1 PC 00336645
Brush extension HIT-RBS-10/0.35 n n 1 PC 00371722
Battery pack B 22/1.6 Li-Ion n n 1 PC 00426177
Cartridge holder HIT-CR 500 n n 1 PC 02007059
Cartridge holder HIT-CB 500 n n 1 PC 02007057

Anchor Systems
HIT Profi System
HIT accessory sets for heavy anchoring applications and the post-installation of rebars.

Comprehensive sets of accessories for maximising your HIT Unique and approved system for safe installation of rebar and
performances and productivity gain anchoring elements up to 40 mm in diameter and 3200 mm in
Great opportunity to customise your HIT installation equipment embedment depth
according to your application needs
Increased system safety in all installation directions and condi-
tions
Order Description Function

HIT Premium Rebar case The Hilti HIT premium set for the rebar professionals who perform post-installation of rebars in
the most challenging situations, with all the required accessories to post-install rebars up to 25
mm and 2500 mm in embedment depth.
HIT Profi Anchor case The Hilti HIT set for professionals who would like to go beyond in their anchoring work with Hilti
HIT, optimising the load bearing capacity of the system and reaching maximum productivity in
serial applications. Ideal for installation of anchoring elements up to 20 mm in diameter and 250
mm in embedment depth.
HIT Profi Rebar case The Hilti HIT set for those professionals who often encounter rebar installation in their daily busi-
ness, with all required equipment to post-install rebars up to 20 mm and 800 mm in embedment
depth. Compact, versatile and complete to make best use of the Hilti HIT rebar system and gain
productivity in the most common applications.
Ordering
Order Description Package content Item
Number
Accessory kit HIT Premium Rebar case Content: case, installation instructions, installation report, drilling aid, com- 00384753
pressed-air connector, blowing extension hoses and tubes, air nozzles DL 12-32
(for rebar diameter 8-25), holders TE-Y and TE-C, brush extensions RBS, round
steel brushes RB 12-32 (for rebar diameter 8-25), injection extension hoses and
tubes, piston plugs SZ 12-32 (for rebar diameter 8-25), markers, thermometer,
rebar saw
Accessory kit HIT Profi Anchor case Content: case, installation instructions, blow-out gun, holder TE-C, brush exten- 00384752
sion RBS 10/0.35, manual brush handle, round steel brushes RB 10-24 (for
threaded rods M10-M20), manual dispenser MD 2500
Accessory kit HIT Profi Rebar case Content: case, installation instructions, installation report, blow-out gun, blowing 00274888
extension hoses, air nozzles DL 12-25 (for rebar diameter 820), holders TE-Y
and TE-C, brush extensions RBS, manual brush extension and handle, round
steel brushes RB 12-25 (for rebar diameter 8-20), manual dispenser MD 2500,
injection extension hoses, piston plugs SZ 12-25 (for rebar diameter 8-20)

Anchor Systems
Accessories
AC HIT Profi
Order Description Item
Number
Case HIT Premium Rebar 00384759

Case HIT Profi 00384757
Assembly instructions HIT Profi 00384756
Installation report HIT Profi 00384755
Blow-out gun G 1/4” 00381215
Extension hose HIT-DL 10/0.8 00038251
Extension hose HIT-DL 16/0.8 00038252
Connecting piece HIT-DL A 00336643
Coupler HIT-DL K 00038250
Connecting piece HIT-DL V10/1 00336644
Extension tube HIT-DL B 00371714

7
Extension tube HIT-VL 16/0.7 00336646
Extension hose HIT-VL 16 00038249
Air nozzle HIT-DL 12 00371715
Brush extension HIT-RBS 10/0.7 00336645
Brush extension HIT-RBS-10/0.35 00371722
Holder TE-C 00263437
Holder TE-Y 00263439

Anchor Systems
Accessories
AC HIT Profi
Order Description Item
Number
Round steel brush HIT-RB 12 00336548
Extension hose PE 1M 00024632
Coupler VL-K 00335021
Piston plug HIT-SZ 12 00335022

Anchor Systems
Design Anchor
HDA-P/ T
Self-undercutting mechanical anchor for heavy duty and safety fastenings into concrete.

Self-undercutting anchor: Simple and quick undercutting opera- Anchor fastenings for high loads and most stringent safety require-
tion results in a keying effect for maximum security even in ments e.g. in power plant and installation construction , securing
cracked concrete heavy machinery and machines
Allows small spacing and edge distances: Low expansion forces Fastenings subject to dynamic loading, e.g. fatigue, seismic or
- performs like a cast-in headed stud shock
Simple installation: No complicated specialized undercutting Heavy-duty fastenings under high tensile or shear loads
tools required
Load can be applied immediately after setting Base Material
Fully removable Concrete (cracked), Concrete (non-cracked)
Ordering Please ask for delivery details

Undercut anchor HDA-P 20-M10x100/20 107 mm 20 mm 20 mm 12 pc 00331544

Undercut anchor HDA-T 20-M10x100/20 107 mm 20 mm 20 mm 12 pc 00331545
Undercut anchor HDA-T 22-M12x125/30 134.5 mm 22 mm 30 mm 8 pc 00331548
Undercut anchor HDA-T 22-M12x125/50 134.5 mm 22 mm 50 mm 8 pc 00331549

Anchor Systems
Undercut Anchor for Presetting

HDA-PF/ HDA-TF
Sherardised min 53µm

Undercut anchor HDA-PF 20-M10x100/20 107 mm 20 mm 20 mm 12 pc 00339356

Undercut anchor HDA-TF 20-M10x100/20 107 mm 20 mm 20 mm 12 pc 00339361
Undercut Anchor for Presetting

HDA-PR / HDA-TR
Material: Stainless steel A4

Undercut anchor HDA-PR 20-M10x100/20 107 mm 20 mm 20 mm 12 pc 00339346

Undercut anchor HDA-TR 20-M10x100/20 107 mm 20 mm 20 mm 12 pc 00339351
Undercut anchor HDA-TR 22-M12x125/30 134.5 mm 22 mm 30 mm 8 pc 00339352
Undercut anchor HDA-TR 22-M12x125/50 134.5 mm 22 mm 50 mm 8 pc 00339353
Setting Tool
TE-C-HDA-ST/ TE-Y-HDA-ST
Ordering
Setting tool TE-C-HDA-ST20-M10 1 pc 00331843

Setting tool TE-C-HDA-ST22-M12 1 pc 00331844
Setting tool TE-Y HDA-ST 20-M10 1 pc 00287133
Setting tool TE-Y HDA-ST 22-M12 1 pc 00287134
Setting tool TE-Y-HDA ST30-M16 1 pc 00331846
Setting tool TE-Y-HDA-ST37-M20 1 pc 00339269

Anchor Systems
Stop Drill Bit for HDA Anchor

TE-C HDA/ TE-Y HDA
Ordering
Stop drill bit TE-C-HDA-B 20x100 1 pc 00332089

Stop drill bit TE-Y-HDA-B 20x100 1 pc 00237449
Disassembly Tool
HDA 7
Ordering
99_00339274_adaptor TE-C-HDA-RTA 3 1 pc 00339274

Disassembly tool TE-C-HDA-RT 20-M10 1 pc 00333433
Dynamic Set
HVZ/HDA
Ordering
Dynamic set M10 2 pc 00369201


Anchor Systems
Heavy Duty Anchor

HSL-3
ETA Approved expansion anchor for heavy loads, for use in dynamic applications and cracked concrete (galvanized version).

High load capacity: Steel spacer sleeve allows use of fewer Any kind of heavy-duty, high-safety application especially
fasteners in high shear load applications where cracked concrete is an issue or extensive approvals
Black plastic section stops turning in hole during setting and back-up is required
collapses for a flush baseplate-to-surface fit Fastening heavy loads e.g. from columns, machines, apparatus etc.
Heavy-duty expansion sleeve allows for installations in Hilti Dynamic conditions e.g. with vibratory or windy conditions
matched tolerance diamond cored holes Nuclear power projects, Telecom, Heavy industrial, Power
Embedment depth mark for easy setting generation, Infrastructure, Tunneling, Stadiums, Roof /
Extensive range of approvals and technical back-up building structures
Base Material
Concrete (cracked), Concrete (non-cracked)

Material: Carbon steel, Bolt: 8.8 grade
Heavy-duty anchor HSL-3 M8/5 80 mm 12 mm 5 mm 40 pc 00371774


Anchor Systems
Heavy Duty Anchor

HSL-3-B

Material: Carbon steel, Bolt: 8.8 grade
Heavy-duty anchor HSL-3-B M12/5 105 mm 18 mm 5 mm 20 pc 00371807

Heavy Duty Anchor

HSL-3-G
7
Material: Carbon steel, threaded rod: 8.8 grade
Order Description Hole depth Drill bit diameter Thickness fastened range Package quantity Item Number
Heavy-duty anchor HSL-3-G M8/5 80 mm 12 mm 5mm 40 pc 00371792


Anchor Systems
Heavy Duty Anchor

HSLG-R

Material: A4 stainless steel (material 1.4401/ AISI 3116)
Heavy-duty anchor HSLGR M8/20 80 mm 12 mm 20mm 40 pc 00067920

Heavy Duty Anchor

HSL-3-SK

Material: Carbon steel, Screws: 8.8 grade
Heavy-duty anchor HSL-3-SK M8/10 80 mm 12 mm 10mm 40 pc 00371825


Anchor Systems
Self-Undercutting Safety Anchor

HSC-A
Self-undercutting anchor with external thread for use anywhere in the compression or tension zone (galvanised version).

Medium duty fastening in cracked or non-cracked concrete, es- Fastening where safety is at stake e.g. to secure cladding and
pecially when shallow embedment and/ or small edge distance facades, installation and ceiling with low embedment depth and
and spacing is required small edge and spacing distance
Automatic undercutting by anchor when anchor sleeve is driven Parking space barriers, seat attachment, balcony safety railings,
onto stud taper which allows quick and easy installation which hand rail, air ducts, fire escape, medium duty facade attachment
saves time and money
Anchor hole very precise due to stepped drill bits ensures cor-
rect installation criteria and safety Base Material
7
Tinst

Material: Steel strength 8.8 zinc plated 5 microns thick
Safety anchor HSC-A M8x40/15 46 mm 14 mm 15 mm 25 pc 00031139

Safety anchor HSC-A M10x40/20 46.5 mm 16 mm 20 mm 25 pc 00031140

HSC-AR

Safety anchor HSC-AR M8x40/15 46 mm 14 mm 15 mm 25 pc 00031148

Safety anchor HSC-AR M10x40/20 46.5 mm 16 mm 20 mm 25 pc 00031149

Anchor Systems

HSC-I
Zinc plated to min. 5µm

Order Description Min. hole depth Drill bit diameter Package quantity Item Number
Safety anchor HSC-I M6x40 46 mm 14 mm 25 pc 00031142


HSC-IR

Safety anchor HSC-IR M6x40 46 mm 14 mm 25 pc 00031151

Setting Tools
HSC
Order Description Diameter For use with Package quantity Item Number
Setting tool TE-C-HSC-MW14 14 mm Internal threaded HSC-I(IR) M6, External threaded HSC-A(AR) M8 1 pc 00031169
Setting tool TE-C-HSC-MW16 16 mm Internal threaded HSC-I(IR) M8, External threaded HSC-A(AR) M10 1 pc 00011267
Setting tool TE-C HSC-MW18 18 mm External threaded HSC-A(AR) M12, Internal threaded HSC-I(IR) M10 1 pc 00071352
Setting tool TE-C-HSC-MW20 20 mm Internal threaded HSC-I(IR) M12 1 pc 00071353
Stop Drill Bit

HSC

Ordering
Order Description Diameter For use with Package quantity Item Number
Stop drill bit TE-C HSC-B 14/40 14 mm HSC-A(R) M8x40/15, HSC-I(R) M6x40 1 pc 00031157
Stop drill bit TE-C HSC-B 14/50 14 mm HSC-A(R) M8x50/15 1 pc 00031158
Stop drill bit TE-C HSC-B 16/40 16 mm HSC-A(R) M10x40/20, HSC-I(R) M8x40 1 pc 00028568
Stop drill bit TE-C HSC-B 18/50 18 mm HSC-I(R) M10x50 1 pc 00030708
Stop drill bit TE-C HSC-B 18/60 18 mm HSC-I(R) M10x60, HSC-A(R) M12x60/20 1 pc 00030709
Stop drill bit TE-C HSC-B 20/60 20 mm HSC-i(R) M12x60 1 pc 00030710

Anchor Systems
Setting tools for HSC anchors
HSC-A M8 40/15 31139

HSC-AR M8 40/15 31148
TE-C-HSC-MW 14 31169 TE-C-HSC-B 14/40 31157
HSC-I M6 40 31142 EW 14 (*)

HSC-IR M6 40 31151
TE 30
HSC-A M8 50/15 31141 TE-C-HSC-MW 14 31169 TE-C-HSC-B 14/50 31158

HSC-AR M8 50/15 31150
TE 40
HSC-A M10 40/20 31140
HSC-AR M10 40/20 31149
HSC-I M8 40 31143 EW 16 (*)

HSC-IR M8 40 31152
HSC-A M12 60/20

HSC-AR M12 60/20
15507
15506
7
HSC-I M10/60 31145 EW 18 (*)

HSC-IR M10/60 31154
HSC-I M10/50 31144 EW 18 (*) TE-C-HSC-MW 18 71352 TE-C-HSC-B 18/50 30708

HSC-IR M10/50 31153 TE 40
HSC-I M12/60 31146 EW 20 (*) TE-C-HSC-MW 20 71353 TE-C-HSC-B 20/60 30710

HSC-IR M12/60 31155
(*) Included with HSC-I anchors

Anchor Systems
Stud Anchor
HST
High performance expansion anchor with unique wedge design for use in cracked and non-cracked concrete (galvanized ver-
sion).

The optimised design of expansion cone and wedge, combined Attaching structural steel, façade, hand rails, racks,
with special steel and coatings, ensure outstanding performance mechanical equipment, pipe supports, elevators etc.
in cracked and non-cracked concrete. to cracked and non-cracked concrete. Particularly suited
Excellent permitted edge and spacing distances for safety relevant application.
Comprehensive product offering includes a large variety of sizes Through fastener for wood angles channels and columns
(from M8 to M24) and materials (carbon steel zinc plated, A4/ in concrete and hard stone
316 stainless steel, and HCR 1.4529 - high corrosion resistant)
for a variety of applications Base Material
Mechanical expansion allows immediate load application and Concrete (cracked), Concrete (non-cracked)
can be installed through the fixture, improving productivity

Ordering
Safety stud anchor HST M8X75/10 65 mm 8 mm 10 mm 100 pc 00371581


Anchor Systems

Stud Anchor
HST-R

Material: A4 stainless steel
Safety stud anchor HST-R M8X75/10 65 mm 8 mm 10 mm 50 pc 00376039

Safety stud anchor HST-R M16X165/50
Safety stud anchor HST-R M16X215/100
115 mm
115 mm
16 mm
16 mm
50 mm
100 mm
12 pc
12 pc
00376052
00376053
7
Stud Anchor
HST-HCR

Material: Stainless steel HCR
Safety stud anchor HST-HCR M8X85/20 65 mm 8 mm 20 mm 20 pc 00288202

Safety stud anchor HST-HCR M10x110/30 80 mm 10 mm 30 mm 20 pc 00295369

Anchor Systems
Standard Stud Anchor

HSA
The ETA approved standard stud anchor for indoor fastening applications in uncracked concrete

n Wide range of fastening applications in concrete HSA
n Fastening facade brackets
Base materials Uncracked concrete
n Fastening brackets and channels
Approvals ETA option 7
n Fastening columns and beams
Environmental conditions Indoor, dry conditions
Features and Benefits Material coating/plating/finish Steel, zinc-plated (min. 5 µm)
n Reliable ETA approved torquing using SIW 14-A or 22-A impact Head configuration Externally threaded with hex nut
wrench with S-TB Type of fixing Through-fastening and pre-
n Excellent edge and spacing distances fastening
n High loads (limit set by concrete cone failure)
n 3 embedment depths offering maximum flexibility
n Suitable for pre-fastening and through-fastening
Ordering
Ordering Description Fastening Fastening Fastening Embed- Embed- Embed- Wrench Sales Item Number
thickness thickness thickness ment ment ment size quantity
@ embed- @ embed- @ embed- depth 1 depth 2 depth 3
ment ment ment
depth 1 depth 2 depth 3
Std stud anchor HSA M6 5/-/- 5 mm 37 mm 47 mm 67 mm 10 mm 200 PC 02036084

Std stud anchor HSA M6 20/10/- 20 mm 10 mm 37 mm 47 mm 67 mm 10 mm 200 PC 02036085
Std stud anchor HSA M6 40/30/10 40 mm 30 mm 10 mm 37 mm 47 mm 67 mm 10 mm 100 PC 02036086
Std stud anchor HSA M12 5/ -/- 5 mm 64 mm 79 mm 114 mm 19 mm 25 PC 02004154

Anchor Systems
Ordering
Ordering Designation Fastening Fastening Fastening Embed- Embed- Embed- Wrench Sales Item Number
ment ment ment

4UETUVEBODIPS)4".9 NN NN NN QD

7
4UVE"ODIPS
)4"3
.BUFSJBM"TUBJOMFTTTUFFM
4UETUVEBODIPS)4"3.9 NN NN NN QD


Anchor Systems
4UVE"ODIPS
)4"'
)PUEJQQFEHBMWBOJ[FE uN
.BUFSJBM$BSCPOTUFFM
4UETUVEBODIPS)4"'.9 NN NN NN QD

4UETUVEBODIPS)4"'.Y NN NN NN QD
.BDIJOF4FUUJOH5PPMGPS4UVE"ODIPST ..
)4")45
0SEFSJOH
0SEFS%FTDSJQUJPO -FOHUI 1BDLBHFRVBOUJUZ *UFN/VNCFS
4FUUJOHUPPM)44$ NN QD

5PSRVFCBS
5JHIUFOJOHUPPMGPS)4"TUVEBODIPS ..
'PSVTFXJUI4*8
0SEFSJOH
0SEFS%FTDSJQUJPO 4J[F 1BDLBHFRVBOUJUZ *UFN/VNCFS
5PSRVFCBS45#)4". . QD


0SEFS%FTDSJQUJPO -FOHUI 1BDLBHFRVBOUJUZ *UFN/VNCFS

Anchor Systems
.FUSJD4UVE"ODIPS
)47
.BUFSJBM$BSCPOTUFFM
4UETUVEBODIPS)47.Y NN NN NN QD


Anchor Systems

HSA-F
The stud anchor for a broad range of fastening applications in uncracked concrete

n Wide range of fastening applications in concrete HSA-F
Environmental conditions Indoor damp conditions
Material coating/plating/finish Steel, hot-dip galvanized 45 µm
Features and Benefits Head configuration Externally threaded with hex nut
n High loads Type of fixing Through-fastening and pre-

fastening
Ordering
ment ment ment
Std stud anchor HSA-F M6 5/-/- 5 mm 37 mm 47 mm 67 mm 10 mm 200 PC 02036310

Std stud anchor HSA-F M6 20/10/- 20 mm 10 mm 37 mm 47 mm 67 mm 10 mm 200 PC 02036311
Std stud anchor HSA-F M8 55/45/15 55 mm 45 mm 15 mm 39 mm 49 mm 79 mm 13 mm 50 PC 02004116
Std stud anchor HSA-F M10 5/-/- 5 mm 5 mm 5 mm 50 mm 60 mm 90 mm 17 mm 50 PC 02004118
Std stud anchor HSA-F M12 5/ -/- 5 mm 64 mm 79 mm 114 mm 19 mm 25 PC 02004172

Anchor Systems

HSA-R
The ETA approved standard stud anchor for outdoor fastening applications in uncracked concrete

n Wide range of fastening applications in concrete HSA-R
Approvals ETA option 7
Environmental conditions Indoor use approved by ETA,
Features and Benefits outdoor use not covered in ap
proval
n Reliable ETA approved torquing using SIW 14-A or 22-A impact
wrench with S-TB Material composition Stainless steel
n Excellent edge and spacing distances Head configuration Externally threaded with hex nut
n High loads (limit set by concrete cone failure) Type of fixing Through-fastening and pre-
n 3 embedment depths offering maximum flexibility fastening
Ordering
ment
depth 1
ment
depth 2
ment
depth 3
7
Std stud anchor HSA-R M6 5/-/- 5 mm 37 mm 47 mm 67 mm 10 mm 200 PC 02036314
Std stud anchor HSA-R M6 20/10/- 20 mm 10 mm 37 mm 47 mm 67 mm 10 mm 200 PC 02036315
Std stud anchor HSA-R M6 40/30/10 40 mm 30 mm 10 mm 37 mm 47 mm 67 mm 10 mm 100 PC 02036316
Std stud anchor HSA-R M12 5/ -/- 5 mm 64 mm 79 mm 114 mm 19 mm 25 PC 02004207
Std stud anchor HSA-R M20 10/-/- 55 mm 30 mm 15 mm 90 mm 115 mm 130 mm 30 mm 10 PC 02036317

Anchor Systems
Drop-in (flush) anchor

HKD
The internally threaded anchor for everday use
Applications Technical data

For medium-duty loads with anchor bolts and threaded rods, e.g. HKD
suspension systems for pipes, air ducts and sprinkler systems
etc. Material coating/plating/finish Zinc plated
Base materials Concrete
Advantages
Ideal for repetitive fastening applications with threaded rods of
the same length - features a collar for accurate setting flush with
the surface irrespective of hole depth
No damage to the thread when tapping in and expanding
”Intelligent” stepped expansion piece adapts to suit materials of
different hardness
Visual check for correct setting
Shallow drilling depth for M6, M8, M10 and M12 (25mm)
Internal Drill bit Hole depth Anchor length Standard Order designation Sales Item Number
thread size diameter embedment Quantity
depth
M6 8 mm 27 mm 25 mm 25 mm Flush anchor HKD M6x25 100 pc 00376894


Anchor Systems
%SPQJO 녡VTI
BODIPS JNQFSJBM
),%
0SEFSJOH
*OUFSOBM %SJMMCJU )PMFEFQUI "ODIPSMFOHUI 4UBOEBSE 0SEFSEFTJHOBUJPO 4BMFT *UFN/VNCFS
UISFBETJ[F EJBNFUFS FNCFENFOU 2VBOUJUZ
#48
EFQUI
NN NN NN NN 'MVTIBODIPS),%ࡻY QD

%SPQJO 녡VTI
BODIPS JNQFSJBM
),%
0SEFSJOH
#48
EFQUI
NN NN NN NN 'MVTIBODIPS),%ࡻYCVDLFU QD

NN NN NN NN 'MVTIBODIPS),%ࡻYCVDLFU QD 7
%SPQJO 녡VTI
BODIPS JNQFSJBM
)%*
0SEFSJOH
#48
EFQUI
ࡴ NN ࡴ 'MVTIBODIPS)%*ࡻ QD

%SPQJO 녡VTI
BODIPS JNQFSJBM
)%7
0SEFSJOH
#48
EFQUI
NN NN NN NN 'MVTIBODIPS)%7ࡻY QD

'PSEFUBJMFEJOGPSNBUJPO QMFBTFSFGFSUPUIFBQQMJDBCMF)JMUJUFDIOJDBMNBOVBMPS&5"EPDVNFOUT
Anchor Systems
Sleeve Anchor
HLC
Clever anchors use their heads.

Variety of lengths and sizes allows for a multitude of applications Permanent and temporary fastening in the light and medium load
Pre assembled anchor to ensure easy and fast installation range
Suitable for different base materials due to expansion principle
Base Material
Ideal for through fastening applications
Easily removable ideal for temporary fastenings Concrete, Concrete block, Brick (solid), Sand-lime stone

Material: Galvanized steel
Sleeve anchor HLC 6,5x25/5 30 mm 6.5 mm 5 mm 100 pc 00385811

Sleeve anchor HLC 8x40/10 40 mm 8 mm 10 mm 100 pc 00385814

Anchor Systems
Sleeve Anchor
HLC-EO

Sleeve anchor HLC-EO 8x40 40 mm 8 mm 50 pc 00385875
Sleeve Anchor
HLC-H

Sleeve anchor HLC-H 8x40/10 40 mm 8 mm 10 mm 100 pc 00385836

Sleeve anchor HLC-H 12x55/15 65 mm 12 mm 15 mm 50 pc 00385848 7
Sleeve Anchor (Round Head)

HLC-L

Sleeve anchor HLC-L 10x50/15 50 mm 10 mm 15 mm 50 pc 00385867


Anchor Systems
Sleeve Anchor
HLC-SK

Sleeve anchor HLC-SK 6,5x45/20 30 mm 6.5 mm 20 mm 100 pc 00385856

Sleeve anchor HLC-SK 8x60/25 40 mm 8 mm 25 mm 100 pc 00385859
Sleeve Anchor
HLV
Through Fastening Version

Sleeve anchor HLV 8x35/10 40 mm 8m 10 mm 100 pc 00432963

Sleeve anchor HLV 10x75/45 50 mm 10 mm 45 mm 50 pc 00432965
Sleeve Anchor
HLV
Pre-Setting Version


Sleeve anchor HLV 16x68/20 100 m 12 mm 16 mm 10 pc 00432969

Anchor Systems
Wedge Anchor
DBZ
Instant and reliable suspensions.

Setting by impact expansion Suspensions from concrete ceilings attaching slit-steel straps,
Automatic follow-up expansion, thus safe fastening punched band, nonius system hanger or wood battens
Fastening of lathes (DBZ 6/35)
Base Material
Fire resistance
7
Ordering
Material: Cold-formed steel, acc. DIN EN 10263-2
Wedge anchor DBZ 6/35 41 mm 6 mm 35 mm 100 pc 00256311

Wedge anchor DBZ 6/4.5 41 mm 6 mm 4.5 mm 100 pc 00256312
Setting Tool
HHD
Ordering
Setting tool HHD-S 1 pc 00332076

Anchor Systems
Frame Anchor
HRD
The best plastic frame anchor worldwide. Hex head, 13 mm.

Anchor body made of high-grade polymide material Cladding/ facade installation (metal frames/ structures)
High holding power, thus fewer fastenings, less installation work Metal construction (installing metal parts)
and lower costs Roofing installation
Fastening door and windows frames
Base Material
Concrete (cracked), Concrete (non-cracked), Stone (hard natural),
Brick (hollow), Brick (solid), Brick (sand-lime)
Frame Anchor (assembled)

HRD-C 8

Frame anchor HRD-C 8x60/10 60 mm 8 mm 50 pc 00202341


HRD-C 10

Frame anchor HRD-C 10x60 60 mm 10 mm 50 pc 00423859


Anchor Systems

HRD-H 10

Frame anchor HRD-H 10x60 60 mm 10 mm 50 pc 00423870


HRD-K 10

Frame anchor HRD-K 10x60 60 mm 10 mm 50 pc 00423878


HRD-P 10

7
Frame anchor HRD-P 10x60 60 mm 10 mm 50 pc 00423883

Frame anchor HRD-P 10x80 80 mm 10 mm 50 pc 00423884

HRD-HF 10
Material: Hot-dip Galvanized steel

Frame anchor HRD-HF 10x60 60 mm 10 mm 50 pc 00423909


HRD-CR 10
Material: Corrosion resistance class III

Frame anchor HRD-CR 10x60 60 mm 10 mm 50 pc 00423885

Frame anchor HRD-CR 10x100 100 mm 10 mm 50 pc 00423886
Frame anchor HRD-CR 10X140 140 mm 10 mm 50 pc 00423887

Anchor Systems

HRD-HR 10
Material: Corrosion resistance class III

Frame anchor HRD-HR 10x60 60 mm 10 mm 50 pc 00423888


HRD-CR2 10
Material: Corrosion resistance class II

Frame anchor HRD-CR2 10x60 60 mm 10 mm 50 pc 00423892


HRD-HR2 10

Frame anchor HRD-HR2 10x60 60 mm 10 mm 50 pc 00423897


HRD-KR2 10

Frame anchor HRD-KR2 10x60 60 mm 10 mm 50 pc 00423902


HRD-KR2 10

Frame anchor HRD-PR2 10x60 60 mm 10 mm 50 pc 00423907

Frame anchor HRD-PR2 10x80 80 mm 10 mm 50 pc 00423908

Anchor Systems
Hammer Screw
HPS-1
Hammer-in anchor for through fastening.

Quick setting: Simple hammer it in, even in poorly accessible Wooden laths/ timber battens, drywall studs, framing, metal sec-
places tions and mouldings, electrical installation components, mechani-
An anchor for many applications, e.g. for electrical installations, cal installations (plumbing/ pipefitting), cable trunking, pipe rings,
for roof, interior finishing and wall extensions, in building con- sheeting/ foils
struction, for mechanical installations and fastening wood
Simple removal using a screwdriver equipped with a cross- Base Material
recess bit Concrete (non-cracked), Concrete (light)
Reduced hole and setting depths (up to 20 mm less)
Trouble free setting thanks to high-quality material, even in
extremely cold or dry conditions
Setting operations
Solid base material: setting with a hammer.
Hollow base material: setting with a screwdriver.

Anchor Systems
Ordering
Material: Steel galvanized /Polyamide PA 6.6
Impact anchor HPS-1 4/0X20 25 mm 4 mm 2 mm 250 pc 00260369

Impact anchor HPS-1 5/15SX35 30 mm 5 mm 15 mm 200 pc 00260375
Impact anchor HPS-1 8/10 M8X16 50 mm 8 mm 10 mm 100 pc 00243021

Anchor Systems
Universal Plastic Anchor

HUD-1
Noticeably easier handling.

Flared collar design makes the anchor suitable for Fastening wood furring strips, junction boxes, cable clips, light
pre-installation or installation through fixtures. switches, light fixtures, brackets, signs, shelves and bathroom
Anti-rotation wings prevent the anchor from rotating or fixtures
falling out during installation
Base Material
Four-way expanding head enhances keying effect in
hollow base material Concrete (non-cracked), Concrete (light), Concrete (aereated),
High-grade nylon material contains no halogen and no Brick (solid), Brick (hollow)
heavy metals
Technical data: HUD-1

Recommended load, Lrec (kN)
Anchor size 5x25 6x30 8x40 10x50 12x60 14x70
Concrete fcc 30 N/mm2 Tensile N Rec0.3 0.55 0.85 1.4 2.0 3.0
Shear V Rec 0.4 0.9 1.25 2.2 3.0 5.6
Solid brick f cc 20 N/mm2 Tensile N Rec0.17 0.35 0.6 0.8 1.0 1.0
Shear V Rec 0.24 0.3 0.44 – – –
Ordering
Material: Polyamide PA 6
Universal anchor HUD-1 5 35 mm 5 mm 200 pc 00338708

Universal anchor HUD-1 5X25 35 mm 5 mm 500 pc 00331615

Anchor Systems
Extra Long Plastic Anchor

HUD-L
Material: Polyamide PA 6
Universal anchor HUD-L 6X50 65 mm 6 mm 400 pc 00315938


Cast-in anchor system
Anchor Systems
Anchor Channel
HAC-40
The new generation of cast-in anchor channels

n Fastening curtain wall brackets HAC-40
n Fastening guide rails for elevators and counterweights
Base materials Concrete
n Fastening sliding door mechanisms for elevators
Surface Finish Hot dip galvanized 55 µm
n Grids for ceilings in showrooms and trade fair halls
For use with HBC-C T-head bolts
n Securing machines to floors or walls
Approvals ETA-11/0006 for static-, dynamic
loading and fire
Features and Benefits
n Innovative V-shape provides high load resistance, especially
under shear loads when positioned close to the edges of the
member
n New type of protective LDPE foam insert and end-caps seal the
channel effectively, preventing entry of concrete slurry
n Foam insert features tear-out strip for trouble-free removal
(avoids damage to the channel through use of drill bits, hammers
or gas torches)
n Special inner profile allows use of one single bolt type for all
channels types from HAC-40 to HAC-70
Length - lch Width - bch Height - hch Effective Number of Anchor Order Description Sales Item Number
embedment depth - hef anchors distance Quantity
200 mm 40.5 mm 28 mm 91 mm 2 150 mm Anchor channel HAC-40 91/200 F 1 pc 00431906


Anchor Systems
Anchor Channel
HAC-50
Hot dip galvanized 55 µm
Ordering
Length - L Width - B Height - H Effective Number of Anchor Order Description Sales Item Number
embedment depth anchors distance Quantity

2050 mm 41.5 mm 31 mm 106 mm 9 250 mm Anchor channel HAC-50 106/2050F 10 pc 02014825
Anchor Channel
HAC-60
Ordering
Length - lch Width - bch Height - hch Effective
embedment depth - hef
Number of
anchors
Anchor
distance
Quantity
Item Number 7
300 mm 43 mm 35.5 mm 148 mm 2 250 mm Anchor channel HAC-60 148/300 F 1 pc 00431850
Anchor Channel
HAC-70
Ordering
Length - lch Width - bch Height - hch Effective Number of Anchor Order Description Sales Item Number
embedment depth - hef anchors distance Quantity


Anchor Systems
T-head Bolt (Galvanized)

HBC-C

n For use with HAC-40 to HAC-70 anchor channels HBC-C
For use with HAC-40 to HAC-70 anchor
Features and Benefits channels
n Simplification of portfolio. Only one universal bolt type needed to Required setting tool Torque wrench
cover HAC-40 to HAC-70 anchor channel
Approvals ETA-11/0006
n European Approval according to latest technical specifications
n Dust-free and noiseless fastening method
Galvanized 8 µm
Thread length Thread diameter Thickness fas- Material composition Order designation Sales Quantity Item Number
tened - max
30 mm 10 mm 8 mm Galvanized steel (4.6) T-head bolt HBC-C M10x30 4.6G 100 PC 00434353

Anchor Systems
T-head Bolt (HDG)

HBC-C-N

n For use with HAC-40 to HAC-70 anchor channels HBC-C-N
For use with HAC-40 to HAC-70 anchor
Features and Benefits channels
n Simplification of portfolio. Only one universal bolt type needed to Required setting tool Torque wrench
cover HAC-40 to HAC-70 anchor channel
Approvals ETA-11/0006
n Notched configuration for increased load performance for shear
load parallel to anchor channel
n European Approval according to latest technical specifications
n Dust-free and noiseless fastening method
Thread length Thread diameter Thickness Order designation Sales Quantity Item Number
fastened - max
50 mm 16 mm 20 mm T-head bolt HBC-C-N M16x50 8.8F 100 PC 00433478 7

60 mm 16 mm 30 mm T-head bolt HBC-C-N M16x60 8.8F 100 PC 02019736

Anchor Systems

Anchor Systems: Hilti. Outperform. Outlast

Uploaded by

Copyright:

Available Formats

Anchor Systems: Hilti. Outperform. Outlast

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Anchor Systems: Hilti. Outperform. Outlast

Uploaded by

Copyright:

Available Formats

Anchor Systems

Hilti. Outperform. Outlast.

www.hilti.com.ph | 02-784 7100 www.hilti.com.ph | 02-784 7100 07 Anchor Systems 159

www.hilti.com.ph | 02-784 7100 07 Anchor Systems 161

162 07 Anchor Systems www.hilti.com.ph | 02-784 7100

www.hilti.com.ph | 02-784 7100 07 Anchor Systems 163

164 07 Anchor Systems www.hilti.com.ph | 02-784 7100

For a lasting bond. 7

Dig the hole. As secure as cast-in bars.

Hilti’s highly experienced technical

www.hilti.com.ph | 02-784 7100 07 Anchor Systems 165

It holds what it promises.

The complete system for *OKFDU)JMUJ)*5NPSUBSDPOWFOJFOUMZBOE

166 07 Anchor Systems www.hilti.com.ph | 02-784 7100

Adhesive Capsule Anchor System

Features and Benefits Fields of Application

Please ask for delivery details

Adhesive capsule HVU M8X80 80 mm 10 mm 10 pc 00256691

www.hilti.com.ph | 02-784 7100 07 Anchor Systems 167

Threaded Anchor Rod

Please ask for delivery details

Anchor rod HAS-E M8X80/14 10 mm 80 mm 14 mm 20 pc 00332219

168 07 Anchor Systems www.hilti.com.ph | 02-784 7100

0SEFS%FTDSJQUJPO %SJMMCJUEJBNFUFS )PMFEFQUI 5IJDLOFTTGBTUFOFESBOHF 1BDLBHFRVBOUJUZ *UFN/VNCFS

"ODIPSSPE)"4&3.9 NN NN NN QD 

"ODIPSSPE)"4&'.9 NN NN NN QD 

www.hilti.com.ph | 02-784 7100 07 Anchor Systems 169

Please ask for delivery details

Anchor rod HAS-E-F M16X125/348 18 mm 125 mm 348 mm 10 pc 00333157

Threaded Sleeve Element

Please ask for delivery details

Int. threaded sleeve HIS-N M8X90 14 mm 90 mm 10 pc 00258015

Threaded Sleeve Element

Please ask for delivery details

Int. threaded sleeve HIS-RN M8X90 A4 14 mm 90 mm 10 pc 00258024

170 07 Anchor Systems www.hilti.com.ph | 02-784 7100

Setting tools for HAS-E and HIS-N

• Diameters M27 to M39

• Setting tools for HIS-N/RN M8 to M20 +

www.hilti.com.ph | 02-784 7100 07 Anchor Systems 171

0SEFS%FTDSJQUJPO "ODIPSTJ[F )PMFEFQUI %SJMMCJUEJBNFUFS 1BDLBHFRVBOUJUZ *UFN/VNCFS

"EIFTJWFDBQTVMF)765;. . NN NN QD 

172 07 Anchor Systems www.hilti.com.ph | 02-784 7100

Please ask for delivery details

Anchor rod HAS-TZ M10X75/15 90 mm 12 mm 15 mm 10 pc 00310018

Anchor rod HAS-RTZ M10X75/15 90 mm 12 mm 15 mm 10 pc 00310019

www.hilti.com.ph | 02-784 7100 07 Anchor Systems 173

Setting Tool HEX

Order Description Package quantity Item Number

Setting tool TE-C HEX M8 1 pc 00311414

174 07 Anchor Systems www.hilti.com.ph | 02-784 7100

www.hilti.com.ph | 02-784 7100 07 Anchor Systems 175

Threaded Anchor Rod

Please ask for delivery details

Anchor rod HIT-V-5.8 M8X80 60 mm 10 mm 20 mm 20 00387054

176 07 Anchor Systems www.hilti.com.ph | 02-784 7100

0SEFS%FTDSJQUJPO )PMFEFQUI %SJMMCJUEJBNFUFS 5IJDLOFTTGBTUFOFENBY 1BDLBHFRVBOUJUZ *UFN/VNCFS

"ODIPSSPE)*573.9 NN NN NN  

0SEFS%FTDSJQUJPO 1BDLBHFRVBOUJUZ *UFN/VNCFS

The complete system for OKFDU)JMUJ)5NPSUBSDPOWFOJFOUMZBOE

"ODIPSSPE)"4&3.9 NN NN NN QD

"ODIPSSPE)"4&'.9 NN NN NN QD

"EIFTJWFDBQTVMF)765;. . NN NN QD

0SEFS%FTDSJQUJPO )PMFEFQUI %SJMMCJUEJBNFUFS 5IJDLOFTTGBTUFOFENBY 1BDLBHFRVBOUJUZ *UFN/VNCFS

"ODIPSSPE)*573.9 NN NN NN

%ZOBNJDTFU. QD

BODIPSSPETBOESFCBST .JYFSUZQFT 3&.

Case HIT Profi 00384757

Assembly instructions HIT Profi 00384756

Installation report HIT Profi 00384755

Blow-out gun G 1/4” 00381215

Extension hose HIT-DL 10/0.8 00038251

Extension hose HIT-DL 16/0.8 00038252

Connecting piece HIT-DL A 00336643

Coupler HIT-DL K 00038250