Scribd
Upload
79 views2 pages

WATER Data Sheet

This document outlines 17 different water quality parameters that can be analyzed using various methods. It provides the method name for each parameter, such as the stannous chloride method for phosphate and the gravimetric method for total dissolved solids. For each test, it lists the reagents, equipment, or process needed to obtain results, for example volume of the sample, titrant used, absorbance readings. The document appears to be an analysis data sheet that would be used to record results of water quality testing.

Uploaded by

Shreya Test House
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
79 views2 pages

WATER Data Sheet

This document outlines 17 different water quality parameters that can be analyzed using various methods. It provides the method name for each parameter, such as the stannous chloride method for phosphate and the gravimetric method for total dissolved solids. For each test, it lists the reagents, equipment, or process needed to obtain results, for example volume of the sample, titrant used, absorbance readings. The document appears to be an analysis data sheet that would be used to record results of water quality testing.

Uploaded by

Shreya Test House
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

8. Phosphate : 9.

Dissolved Oxygen: By Winker method


By stannous chloride ( SnCl2) method Std. (mg/l) N/80 Hypo
absorbance Graph factor = Volume of sample taken for titration, ml (V1)=
Average G.F .= Volume of hypo consumed, ml (V2) =
Sample Absorbance = SHREYA TEST HOUSE
Blank Absorbance= (LAB DIVISION OF SHREYA REALTY PVT. LTD.)
Normality of hypo used (N)=
STH/PRF/7.8/04 (W)
Dissolved Phosphate , mg/l (as P)= Sample Abs. x DO, mg/l= V2*N*8*1000/V 1
G.F. ANALYSIS DATA SHEET- WATER

Sample Code No.: Date of Sample Received :


Sample Description: Date of Analysis Start:
Quantity of Sample: Date of Completion:
10.
1. Magnesium as Mg
Conductivity, (mg/l): [Using Conductivity
µmhos/cm: 11.2. Nitrate (as NO3),
pH [Using mg/lpH
Calibrated : meter]
meter] Buffer-4.0, 7.0,9.0
Mg (mg/l)= By Chromotropic Acid Method,
[(B.R.
Sample-of T.H.- B.R. of Ca) x N x 24.30 x Sample-
Abs. of Blank=
3. Total Hardness (as CaCO3), mg/l: 4. Abs. of Sample=
Calcium (as Ca) ,mg/l:
1000]/Sample Taken
Titrant used for sample in ml. (A)= Graph Factor=
Titrant used for sample in ml. (A)=
Titrant used for blank in ml. (B) = Nitrate
Titrant(asused
NO3)
formg/l=
blank Abs.
in ml.x (B)
G.F.=
Sample taken in ml. (S)= Sample taken in ml. (S)=
Molarity of EDTA (M) = Molarity of EDTA (M) =
(A– B) x M x 100x 1000x V (A– B) x M x 40.08x 1000x V
Total Hardness(mg/l) = ––––––––––––––––––––– Calcium(mg/l) = –––––––––––––––––––––
Sxv Sxv

Alluminium: By Using AAS Method 13. Cadmium: By Using AAS Method


12. Mass of Alluminium present in µg in 100 ml of the Mass of Cadmium in µg in the sample=
final solution (M) =
5. Chloride (as Cl), mg/l: 6. Total Dissolved Solids, mg/l
Volume of the sample in ml (V) =
Titrant used for sample in ml. (A)= [Gravimetric Method]
Al (mg/l)= Mx1000/V= Volume
Vol. Ofof the sample
Sample, V= in ml=
Titrant used for blank in ml. (B) =
Sample taken in ml. (S)= Final Wt. ofmg/l=
Cadmium, Beaker (g)=x 1000
M/V
Normality of AgNo3 (N) = Dry Wt. of Beaker (g)=
Diff. in wt. (g)=
(A– B) x N x 35.5 x 1000x V
TDS= diff in wt × 106/V
Chloride (as Cl), (mg/l) = –––––––––––––––––––––
Sxv

Total Chromium (Cr): By Using AAS Method, 15. Copper (Cu): By Using AAS Method,
14. Mass (in µg) of copper in the sample (M)=
Mass of Chromium (Cr) present in µg in 100 ml of
the final solution (M) =
Volume of the sample in ml (V) = Volume of sample in ml (V)=
Cr (mg/l)= Mx1000/V=
Copper, mg/l= M/V x 1000
DOCUMENT NO.: STH/PRF/7.8/04(W) DOCUMENT NAME: ANALYSIS DATA SHEET- WATER
ISSUE NO.:01 ISSUE DATE:15.04.2019 AMEND NO.:00 AMEND DATE:00 PAGE: 1 of 7
PREPARED BY: REVIEWED & APPROVED BY: ISSUED BY:

16. Iron (Fe): By Using AAS Method, 17. Lead (Pb): By Using AAS Method,
SHREYA TEST HOUSE
(LAB DIVISION OF SHREYA REALTY PVT. LTD.)
STH/PRF/7.8/04 (W)

ANALYSIS DATA SHEET- WATER

Done By Checked By
(Name & signature) (Name & signature)

DOCUMENT NO.: STH/PRF/7.8/04(W) DOCUMENT NAME: ANALYSIS DATA SHEET- WATER


ISSUE NO.:01 ISSUE DATE:15.04.2019 AMEND NO.:00 AMEND DATE:00 PAGE: 2 of 7
PREPARED BY: REVIEWED & APPROVED BY: ISSUED BY:

You might also like