Scribd
Upload
501 views7 pages

AEM EMS-4 Setup Notes - 01v23 Firmware Updates

Uploaded by

Alexandru Avrigeanu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
501 views7 pages

AEM EMS-4 Setup Notes - 01v23 Firmware Updates

Uploaded by

Alexandru Avrigeanu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

EMS-4 Notes:

01v23 Firmware updates


There are new features in the 01v23 firmware update for the AEM EMS-4. This document is intended
to describe these changes.

WARNING:
This installation is not for the tuning novice nor the PC illiterate!

,!
Use this system with EXTREME caution! The AEM EMS System
allows for total flexibility in engine tuning. Misuse of this
product can destroy your engine! If you are not well versed in
engine dynamics and the tuning of management systems or are
not PC literate, please do not attempt the installation. Refer the
installation to a AEM trained tuning shop or call 800-423-0046
for technical assistance. You should also visit the AEM EMS
Tech Forum at http://www.aempower.com

NOTE: AEM holds no responsibility for any engine damage that


results from the misuse of this product!

This product is legal in California for racing vehicles only and should never be
used on public highways.

ADVANCED ENGINE MANAGEMENT INC.


th
2205 126 Street Unit A Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
© 2011 Advanced Engine Management, Inc.

Page 1 of 7
Updates and Enhancements:
-Fixed: ‘Speed Range 0-25600’ option for EMS-4

-Updated: CAN telemetry settings

Firmware Update Process:


Open the calibration file you want to convert in AEMTuner.

Select Tools>Convert Current Calibration.

Page 2 of 7
Select AEM20 01v23 from the To: drop down list. Select the Manual conversion mode as shown.
Click Convert to start the process.

Page 3 of 7
The options that are unique to the 01v23 firmware version are listed in the left side table. No other
actions are required in this window.

Click Save to save the new calibration.

BEFORE PROCEEDING WITH THE NEXT STEPS, UNPLUG ALL COILS AND INJECTORS!

With switched power turned on and the engine off, connect to your ECU with AEMTuner.

Select ECU>Upload EMS Firmware.

Page 4 of 7
Select the new firmware file to load from the dropdown list on the right, AEM20 01v23.fin.

Click Next to start the process. NOTE: Be sure that neither the laptop power nor the switched power
to the ECU is interrupted during this process.

Page 5 of 7
In the next step, select the calibration file that was converted earlier in this process.

Select Next in this window.

…and Go in this window.

Page 6 of 7
The system will complete the update process automatically.

Follow the on-screen instructions to cycle power. Then hit OK.

The system will automatically re-connect when the process is completed.

Page 7 of 7

You might also like