Scribd
Upload
627 views2 pages

O Level Physics Unit 8: Temperature

1. This document discusses principles of thermometry including defining the ice point and steam point as reference temperatures, describing how thermometers work by measuring a physical property that changes with temperature, and outlining procedures to construct a temperature scale. 2. Key thermometers are described as using the volume of liquid, electromotive force, or resistance of platinum to measure temperature. Conversion formulas between Celsius and Kelvin scales are also provided. 3. The document concludes by defining properties of good thermometers like sensitivity and responsiveness, and advantages of thermocouple thermometers in having a wide temperature range and fast response due to low heat capacity.

Uploaded by

tyron daniel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
627 views2 pages

O Level Physics Unit 8: Temperature

1. This document discusses principles of thermometry including defining the ice point and steam point as reference temperatures, describing how thermometers work by measuring a physical property that changes with temperature, and outlining procedures to construct a temperature scale. 2. Key thermometers are described as using the volume of liquid, electromotive force, or resistance of platinum to measure temperature. Conversion formulas between Celsius and Kelvin scales are also provided. 3. The document concludes by defining properties of good thermometers like sensitivity and responsiveness, and advantages of thermocouple thermometers in having a wide temperature range and fast response due to low heat capacity.

Uploaded by

tyron daniel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

O Level Physics

Unit 8: Temperature
Principles of Thermometry
1) Ice point: The temperature of pure melting ice at one atmospheric pressure.
Steam point: The temperature of steam from pure boiling water at one atmospheric pressure.

2) A thermometer makes use of a physical property which changes evenly and continuously with
temperature. The physical property of any thermometer is directly proportional to the
temperature.

3) Suggest a procedure for constructing a temperature scale in an unmarked thermometer.


State the assumption made in your procedure.

Step1: Record the values of the physical property of the thermometer at the lower and upper
fixed points. The ice point and steam point can be obtained by measuring the values of
the physical property when placed in pure melting ice and steam from pure boiling
water at standard atmospheric pressure respectively.
Step2: Divide the temperature range between the two fixed points into intervals to obtain a
scale.

Assumption made: The physical property varies evenly and continuously with changing
temperature.

4)
 C     0
x 100 where  is the physical property of the thermometer.
 
100 0

5) Physical Property Thermometer


Volume of fixed mass of liquid with Mercury-in-glass thermometer
increasing temperature
Electromotive force produced with Thermocouple thermometer
increasing temperature difference
Resistance of platinum wire with increasing Resistance thermometer
temperature

6) Temp/K = Temp/°C + 273


1K = 1°C
[Physics] Unit 8: Temperature

http://sites.google.com/site/olevelexamnotes/
1
7) Property Definition Ways to increase efficiency
Sensitivity Change in length of 1. Narrow the bore of the capillary tube. This
mercury thread allows a more noticeable expansion of
with temp increase mercury thread with a small temp change.
2. Increase the volume of the liquid. This allows
of 1°C
greater liquid expansion and hence a larger
increase in thread length with a small temp
change.
Responsiveness The time taken for 1. Decrease volume of liquid in the bulb. A
the thermometer smaller amount of liquid has lower heat
to register a 1°C capacity and thus less time is needed to
register temp changes.
temp change.
2. Choose thermometric liquids with lower
specific heat capacity. Such liquids heat up
faster and hence less time is needed to
register temp changed.
Range 1. Choosing an appropriate thermometric
liquid.
2. Increasing length of capillary tube. A longer
tube allows larger expansion of liquid and
allows measurements of wider temp ranges.

Thermocouple thermometers
8) The thermometric property used in the thermocouple thermometer is the variation of the
voltage generated with increasing temp difference between the cold and hot junctions.

9) The cold junction of the thermocouple is placed at ice point (in pure melting ice) while the hot
junction is placed in the object to be measured. This temp difference generates an EMF and a
millivoltmeter calibrated in °C is used to measure the temperature.

10) Main advantages of thermocouple thermometers:


1. It has a wide temp range of -200°C to 1500°C and thus can be used to measure high
temps.
2. It is very responsive to rapidly changing temperatures because of its low heat capacity.
Its low heat capacity is due to small mass and because metals are good conductors of
heat.

Notes:
[Physics] Unit 8: Temperature

http://sites.google.com/site/olevelexamnotes/
2

You might also like