Scribd
Upload
145 views

VHDL Code For Half Adder Using Three Modeling

The document describes three VHDL code implementations of a half-adder circuit: 1) a dataflow model that assigns sum and carry outputs directly using logical expressions, 2) a behavioral model that encapsulates the logic in a process, and 3) a structural model that instantiates XOR and AND components to compute the outputs.

Uploaded by

Keertana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
145 views

VHDL Code For Half Adder Using Three Modeling

The document describes three VHDL code implementations of a half-adder circuit: 1) a dataflow model that assigns sum and carry outputs directly using logical expressions, 2) a behavioral model that encapsulates the logic in a process, and 3) a structural model that instantiates XOR and AND components to compute the outputs.

Uploaded by

Keertana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

VHDL Code for a Half-Adder

Logical Expression: Sum = A XOR B, Carry = A AND B

 Dataflow Modeling

Library ieee;
use ieee.std_logic_1164.all;

entity half_adder is
port(a,b:in bit;
sum, carry:out bit);
end half_adder;

architecture HA of half_adder is
begin
sum<= a xor b;
carry <= a and b;
end HA;

a) Behavioral Modeling

Library ieee;
use ieee.std_logic_1164.all;

entity half_adder is
port(a,b:in bit;
sum, carry:out bit);
end half_adder;

architecture HA of half_adder is
begin

process (a,b);
sum<= a xor b;
carry <= a and b;
end process;

end HA;

b) Structural modeling

Library ieee;
use ieee.std_logic_1164.all;

entity half_adder is
port(a,b:in bit;
sum, carry:out bit);
end half_adder;

architecture HA of half_adder is

component xor2
port(a, b: in bit;
y:out bit);
end component

component and2
port(a, b: in bit;
y:out bit);
end component

begin
o1: xor2 portmap(a,b,sum);
o2:and2 portmap(a,b,carry);

end HA

You might also like