CERAMIC SMD ULTRA MINIATURE QUARTZ CRYSTAL

ABM10 Moisture Sensitivity Level (MSL) – This product is Hermetically

Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable
Pb RoHS/RoHS II Compliant
2.5 x 2.0 x 0.5 mm
| | | | | | | | | | | | | | |

FEATURES: APPLICATIONS:
• 2.5 x 2.0 x 0.5mm ultra miniature package • Blue-tooth, Wireless applications • High density applications
• Suitable for RoHS reflow profile • Computers, Modems, Microprocessors • PCMCIA
• Tight stability available ±10ppm over -10 to +60ºC • Communication, Test equipment • Portable radios and MP3 players
• Seam sealed ceramic package assures high precision and reliability
STANDARD SPECIFICATIONS:
Parameters Minimum Typical Maximum Units Notes
Frequency Range 12.000 55.000 MH z Fundamental
Operation Mode Fundamental
Operating Temperature -10 +60 ºC See options
S t o r a g e Te m p e r a t u r e -40 +125 ºC
Frequency Tolerance @+25°C ±20 ppm See options
Frequency Stability over the Operating
±30 ppm See options
Temperature ( ref. to +25°C)
Equivalent series resistance (R1) See table 1 below Ω
Shunt capacitance (C0) 7 pF
Load capacita nce (CL) 10 pF Standard (See options
if other than STD)
Drive Level 10 100 µW
Aging@25°C±3°C ±5 ppm First year
Insulation Resistance 500 MΩ @ 100Vdc ± 15V
Table 1 – standard ESR
Frequency (MHz) ESR(Ω) max.
12.000 – 15.999 250
16.000 – 19.999 150
20.000 – 29.999 100
30.000 – 55.000 70
OPTIONS & PART IDENTIFICATION: (Left blank if standard)
ABM10 - MHz - - - - -

Packaging
Frequency in MHz Blank: Bulk
Please specify the T: 1000pcs/reel
frequency in MHz. T3: 3000pcs/reel
e.g. 16.000MHz

Load Capacitance
(pF) Freq. Tolerance
Custom ESR if other
Please specify CL 1: ± 10 ppm
than standard
in pF or S for series R□ 7: ± 15 ppm
(8pF min.) □: Specify a value in Ω 3: ± 25 ppm
(e.g.: R40) 4: ± 30 ppm

Operating Temp. ± 10 ppm ± 15 ppm ± 20 ppm ± 30 ppm ± 50 ppm ± 100 ppm

0°C ~ +50°C I10 I15 I20 I30 I50 I100
-10°C ~ +60°C A10 A15 A20 STD* A50 A100
-20°C ~ +70°C E10 E15 E20 E30 E50 E100
-30°C ~ +70°C C10 C15 C20 C30 C50 C100
-30°C ~ +85°C N10 N15 N20 N30 N50 N100
-40°C ~ +85°C X X D20 D30 D50 D100
-40°C ~ +105°C X X X X J50 J100
-40°C ~ +125°C X X X X K50 K100
* Please leave blank, as this is the standard/default spec. Contact Abracon for tighter frequency stability

ABRACON IS
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.21.15
ISO9001:2008 LLC
Ph. 949.546.8000 | Fax. 949.546.8001
CE RTIFIED
CE RTIFIED Visit www.abracon.com for Terms and Conditions of Sale
CERAMIC SMD ULTRA MINIATURE QUARTZ CRYSTAL
ABM10 Pb RoHS/RoHS II Compliant
2.5 x 2.0 x 0.5 mm
| | | | | | | | | | | | | | |

OUTLINE DRAWING:

Note: From the top view (marking side), pin #1 is always

located at the bottom left corner of the package. This is
regardless of the location of the Chamfer, since due to
material availability, the Chamfer could be located on
pin#1, 2 or 4. Be advised that the Chamfer location has no
impact on the electrical performance of the device.
Dimensions: inches (mm)

TAPE & REEL: REFLOW PROFILE:

T: 1000pcs/reel
T3: 3000pcs/reel

Dimensions: mm

ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial,
Need a test socket for the ABM10 Series? To view Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military,
compatible PRECISION TEST & BURN-IN SOCKETS Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure
for these parts, click here. P/N: AXS-2520-04-10 could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating
environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for
-
more information.

ABRACON IS
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.21.15
ISO9001:2008 LLC
Ph. 949.546.8000 | Fax. 949.546.8001
CE RTIFIED
CE RTIFIED Visit www.abracon.com for Terms and Conditions of Sale