Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    13 1A Side CWT Temp. Sett.

    Uploaded by

    gajendrabanshiwal8905
    This document is a template setting report for a lift installation project. It contains a checklist of 8 items to ensure the lift installation template is properly constructed. These items include confirming the template is made to the general arrangement drawing, wood thickness is sufficient, supports are the correct size, and minimum distances from the machine room and entrance are met. It also includes tables to record landing side clearances, car bracket heights, and template bracket heights for up to 40 total stops. The report requires signatures from the contractor, engineer, and quality assurance inspector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    13 1A Side CWT Temp. Sett.

    Uploaded by

    gajendrabanshiwal8905
    20 views6 pages
    This document is a template setting report for a lift installation project. It contains a checklist of 8 items to ensure the lift installation template is properly constructed. These items include confirming the template is made to the general arrangement drawing, wood thickness is sufficient, supports are the correct size, and minimum distances from the machine room and entrance are met. It also includes tables to record landing side clearances, car bracket heights, and template bracket heights for up to 40 total stops. The report requires signatures from the contractor, engineer, and quality assurance inspector.

    Original Description:

    1A Side CWT Temp. sett.

    Original Title

    13 1A Side CWT Temp. sett.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a template setting report for a lift installation project. It contains a checklist of 8 items to ensure the lift installation template is properly constructed. These items include confirming the template is made to the general arrangement drawing, wood thickness is sufficient, supports are the correct size, and minimum distances from the machine room and entrance are met. It also includes tables to record landing side clearances, car bracket heights, and template bracket heights for up to 40 total stops. The report requires signatures from the contractor, engineer, and quality assurance inspector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views6 pages

    13 1A Side CWT Temp. Sett.

    Uploaded by

    gajendrabanshiwal8905
    This document is a template setting report for a lift installation project. It contains a checklist of 8 items to ensure the lift installation template is properly constructed. These items include confirming the template is made to the general arrangement drawing, wood thickness is sufficient, supports are the correct size, and minimum distances from the machine room and entrance are met. It also includes tables to record landing side clearances, car bracket heights, and template bracket heights for up to 40 total stops. The report requires signatures from the contractor, engineer, and quality assurance inspector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    ThyssenKrupp Elevator ( STAGE - 1 A Date :

    India ) Side CWT Template Setting Report JOB NO


    Layout Drg. No.
    Project Name and Location :
    Wing No. Lift No.

    Point No Items to be checked on Template Y/ N

    P1 Template is made as per GAD. Wood thickness is


    1 more than 25mm.
    L
    2 Template supports are of correct size.

    M 3 Template fixed in one level.

    4 Diagonals are correct and joints are rigid.

    5 Proper supports used in pit to tie plumb wires.


    Q1
    6 Center of car rails and entrance is in one line.
    Minimum distance from m/c end to wall is 100
    7 mm.from all the sides.
    G H 8 Minimum distance from OSG to wall is 50 mm.

    LANDING SIDE CLEARANCE CAR BRACKET HEIGHTS CWT BRACKET HEIGHTS

    G H Bracket L M P1 Q1
    Total Floor As per GAD As per GAD No. from As per GAD As per GAD As per GAD As per GAD
    Stops Name bottom to
    top

    1 1

    2 2

    3 3

    4 4

    5 5

    6 6

    7 7

    8 8

    9 9

    10 10

    11 11

    12 12

    Name & signature of NI Engineer with Name & signature of FQA-in-


    Name & signature of Contractor with Date Date charge with Date
    Doc.No. : 0095OP999901360 Page 20

    LANDING SIDE CLEARANCE CAR BRACKET HEIGHTS CWT BRACKET HEIGHTS

    G H Bracket L M P1 Q1
    Total Floor As per GAD As per GAD No. from As per GAD As per GAD As per GAD As per GAD
    Stops Name bottom to
    top

    13 13
    14 14
    15 15
    16 16
    17 17
    18 18
    19 19
    20 20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36

    37

    38

    39

    40

    Name & signature of FQA-in-


    g Q
    Name & signature of Contractor with Date Name & signature of NI Engineer with Date charge with Date

    Doc. NO. 0095OP999901360 Page 21

    You might also like