Fl956H Wheel Loader: Operating Weight (KG) 16870 19190 Bucket Capacity (M) 2.5-5.5 Rated Power (KW/RPM) 162/2000

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7
At a glance
Powered by AI
The key takeaways are that the document provides specifications, reliability features, and efficiency features of the FL956H wheel loader.

The main specifications provided include dimensions, rated load mass, wheelbase, digging force, bucket sizes, speed, and other technical parameters.

Reliability features discussed include the 3-stage air filter, fuel filters, reinforced overrunning clutch, imported bearings and seals, hydraulic system design, braking system, reinforced axle and drive components, reinforced frame and hinge structure, and high strength/wear resistant bucket material.

FL956H WHEEL LOADER

Operating weight (kg)


16870~19190
Bucket capacity (m3)
2.5-5.5
Rated power (kw/rpm)
162/2000

956.2.indd 1 2018/9/23 星期日 21:42:58


LOVOL CONSTRUCTION MARCHINERY GROUP

ReliabILITY
Strict testing and verification, durable parts, worthy of your trust.

Engine Gearbox Hydraulic system Structural parts and Braking system Reinforced drive axle
·For various high-dust working ·The gearbox adopts the patented ·The hydraulic system consists of three articulation ·The braking system is equipped ·With optimized design of axle
environments of the loader, the three- reinforced overrunning clutch, which small displacement pumps, each of which with a drying and back-blowing water housing, the cross section is enlarged,
· With new reinforced frame and patented
stage air filter is adopted to effectively improves the reliability life by 30%; has small displacement, small volume, high composite hinge structure, the super- removal device to prevent pipeline the bearing on the wheel side is
reduce the early wear fault probability ·The bearings and oil seals at key bearing pressure and high reliability. bearing capacity has been fully verified corrosion and winter freezing, and the enlarged, and the bearing capacity of
of the engine and extend the service locations adopt imported components ·The hydraulic system filter element has a by millions of impact fatigue experiments, brake is more reliable and safer. the front axle can reach 40t;
life; and have higher reliability. filtration ratio of 200 (99.5% of impurities 1000 hours of strengthening experiments, ·With reinforced main reduction
·With multi-stage fuel filter, fuel can be filtered out), thus the system is and 5000 hours of industrial experiment; and reinforced wheel edge, life is
adaptability is good, ensuring the cleaner and more reliable. ·The bucket material adopts JF440 jointly increased by 30%.
cleanliness of the engine system. developed with domestic famous steel
mills, which has higher strength and
better wear resistance;
·The shaft sleeve adopts 20CrMnTi
honeycomb shaft sleeve, and the inner
surface adopts patented spraying
process, and has self-lubrication function
and long service life.

956.2.indd 2-3 2018/9/23 星期日 21:43:02


LOVOL CONSTRUCTION MARCHINERY GROUP

Efficiency
Higher productivity and lower overall operating costs.

Operation under composite operating condition is stronger and more


efficient.
· With Lovol customization power and exclusive power curve, it provides excellent acceleration performance and quick response;
· The high-torque engine and high-efficiency drive system are perfectly matched with the hydraulic multi-stage power working system.
According to the operating condition, the optimal choice is made among the three power modes to improve production efficiency.

The multi-stage hydraulic power steering is light and the three-pump


confluence operation is more efficient, and energy saving can be 6%~8%.

Efficient working device


·With high-efficiency linkage mechanism, it provides large digging force, quick action and strong lifting ability;
· With optimal design of the bucket type, the insertion resistance is small, and the full-bucket rate is high;
· The bucket has a baffle plate to prevent material from spilling.

Super machine stability and flexibility


· With full steering rollover load of more than 11 tons, it has super overload capacity;
· The center is hinged, the turning radius is small, the front and rear wheel tracks are coincident, and the running resistance is small.

Electronic silicone oil fan (optional)


· More power and torque of the engine is distributed to the drive system and hydraulic system, providing good power performance and high
operating efficiency;
· The system can automatically adjust the fan speed by detecting the water temperature and transmission oil temperature through the engine
ECU to ensure the best operating environment temperature, and the energy saving effect is more than 10%;
· When the temperature is low in winter, the fan consumes low power, the engine temperature rises quickly, the efficiency is high, and the
warm air effect is good.

956.2.indd 4-5 2018/9/23 星期日 21:43:06


LOVOL CONSTRUCTION MARCHINERY GROUP

Comfort Maintenance
With comfortable operation, spacious and ergonomic design, and Simplified daily inspection and longer maintenance period.
excellent vision, driving and riding are more comfortable.
Convenient for daily
maintenance
· The hood adopts large side door and up-turn design, the
opening angle is large, realizing "one-stop" maintenance
of engine air filter, oil filter, diesel filter, and bivariant filter;
· The lubrication point of the pin shaft is extracted for
convenient daily maintenance;
· The pin lubrication point is taken out for easy routine
maintenance;
· Single-layer parallel radiator, which is anti-blocking and
easy to clean;
· Transparent kettle is installed on the radiator to display
the liquid level of antifreeze and make it convenient
to observe and recover the overflowed antifreeze and
conduct automatic replenishment.

Maintenance
· Open split brake caliper, easy replacement of brake pads
without disassembling the tires;
· The hydraulic system is equipped with quick-change
couplings for easy testing and inspection;

Extended maintenance cycle


·Long maintenance and care intervals, high machine
utilization while significantly reducing operating costs.

Comfortable operation
· With multi-stage hydraulic power control system, steering is light and accurate;
· High backrest and high performance mechanical suspension seat alleviate the fatigue of drivers and passengers;
· With pilot operation of working hydraulic pressure, the pilot operation box can be adjusted according to the operator's comfort, providing
easy operation and good coordination. Wide applicability
Comfortable driving environment Environmental adaptability
· With integrated and fully enclosed frame structure cab, it can prevent rollover and falling objects with low noise, creating a safe and healthy · Normal operation at ambient temperature -35 to +45°C (optional cold start device);

driving environment; · Normal operation at an altitude of 3000m;


· With panoramic cab, the vision is wide; · High-flow, high-precision filters for various systems for operation in high-dust environment;
· The rear part of the machine hood is equipped with a standard rearview mirror, which can eliminate the blind area of vision and make · Optional oil bath filter for engine air filters.
reversing safer;
· With a micro pressurizing air conditioning system, the environment is cleaner and more comfortable. Operating conditions
· The instrument has fault information display function to improve man-machine interaction; · Different buckets and attachments depending on the material.
· Optional reversing camera.

956.2.indd 6-7 2018/9/23 星期日 21:43:08


LOVOL CONSTRUCTION MARCHINERY GROUP

Standard configuration
Power transfer system Cab Working device Other
Weichai WP10G220E343/Cummins' QSL9.3 /Shangchai ETX cab Reverse six-link Grease filling nozzle
SC11CB220G2B1 Mechanical suspension seat Honeycomb bushing Pinned articulated towbar
Fuel oil water separator Steering wheel Visual check: Engine coolant, hydraulic oil and
Fuel prefilter + secondary filter Rear view mirror, exterior rear view mirror transmission oil level
Engine intake cyclone prefilter Hat-and-coat hook Toolbox
Three-stage dust air filter Cup holder Repair kits
Three output powers (fuel-saving switch) Sun visor Locking lever
Hydraulic four-component double-turbine torque converter Sun visor
Planetary Power Shift Transmission Air conditioning
Air chamber booster brake Fan Optional configuration
Reinforced drive axle Cab ceiling light
Wide base bias tire 24V power outlet Some optional devices may be standard in some markets, but some optional configurations may not be available in certain
Front wiper/washer, spray bottle markets. You must contact your local dealer to know the availability of equipment or adjust according to the corresponding
requirements. The specific configuration is subject to the concrete one.
Radio and video player (entertainment), including antenna

and speaker

Warning Light Cab Working device


Anti-roll-over cab (FOPS/ROPS) Extended boom/super long arm
Pneumatic suspension seat Quick-change multi-function accessory
Digital monitoring system Hydraulic system Seat belt Super-large bucket/grain bucket/side dumper/coal bucket/
Oil bath air filter rock bucket
Including the following meters: Coaxial flow amplification steering system
Quick-change device control system Wood grabber
-Engine tachometer Three pumps converged hydraulic system
Rear monitor system Marble fork
-Brake barometer Pilot manipulation
flat fork
-Fuel level gauge

Thermometer: Engine coolant thermometer, transmission oil

thermometer
Lighting equipment
Working hour meter 24V electrical system
Includes the following indicators/alarm lights: 2 maintenance-free 850CCA batteries Hydraulic system Lighting equipment
-Temperature indicator (high engine coolant temperature, Ignition key: Start/stop switch
Constant variable hydraulic system Two front LED work lights
high transmission oil temperature) Main power switch
Mechanical manipulation Two rear LED work lights
-Pressure indicator (low transmission oil pressure, low brake Two rear combination lights (parking lights, turn signals,
pressure) reversing lights, position lights)
Battery (charged/uncharged) warning light Two front combination lights (high/low beam light, turn signal)
Parking brake warning light
Other
Two front work lights

Two rear work lights Automatic centralized lubrication


Reversing alarm Cold starting system
70A alternator Electronic scale
Electric horn

956.2.indd 8-9 2018/9/23 星期日 21:43:08


LOVOL CONSTRUCTION MARCHINERY GROUP

Specification
Standard arm with 3.3m3 bucket and long arm with 3m3 bucket are availiable PRODUCT SUPPORT NETWORK
for fl956h. Other attachments are optional according to your demand.
Lovol Construction Machinery has established a complete service network

covering more than 50 countries in Asia-Pacific- Africa. South America and

Russia etc., so as to provide better services for global customers.


Standard Unloading Unloading Extra Unloading Coal-specific Unloading
Name Unit m³ Long arm
arm height, mm height, mm long arm height, mm U-arm height
Standard bucket 3.0 ○ 3131 ○ 3415 ○ 3721 / /
3.3 ● 3100 ○ 3376 ○ 3680 / /
Super-large bucket 3.6 ○ 3086 ○ 3372 ○ 3681 / /
3.8 ○ 3070 ○ 3368 ○ 3672 / /
4.0 ○ 3075 ○ 3359 ○ 3670 / /
4.5 / / ○ 3265 ○ 3576 / /
5.0 / / / / ○ 4570 / /
U-shaped coal bucket 4.5 / / / / / / ○ 3564
5.0 / / / / / / ○ 3500
5.5 / / / / / / ○ 3420
Rock bucket 2.5 ○ 3262 ○ 3558 / / / /
2.8 ○ 3151 / / / / / /
Side dumper 2.5 ○ 3048 / / / / / /
Iron sand bucket 2.5 ○ 3228 ○ 3524 / / / /
Wood grabber ○ 3420 / / / / / /
Marble fork ○ 2848 / / / / / /
quick-change bucket 3.0 ○ 2966 / / / / / / fice

quick-change bottom fork ○ 3353 / / / / / /


flat fork ○ 3491 ○ 3787 / / / /

Standard combination Optional combination / Special needs

Technical Parameters

Overall dimensions (mm) (length × width × height) 8360X2980X3380 Kerb mass (kg) 16970

Rated load mass (kg) 5500 Maximum speed (km/h) 42

Wheelbase (mm) 3300 Track (mm) 2150

Digging force (kN) 175 Traction (kN) 160

Bucket outer turning radius (mm) 7020 Sum of three items (s) 10.6

Steering angle (°) 37 Gradeability(°) 30

Unloading height (mm) 3100 Unloading distance (mm) 1160

956.2.indd 10-11 2018/9/23 星期日 21:43:09


Technology Creating The Future

LOVOL HEAVY INDUSTRY CO.,LTD


add: NO.192 S Beihai Road,Weifang,Shandong,China
Website: www.en.lovol.com Email:lovol_hwyxglb@163.com
TEL: +86-532-86908163 Asia-pacific Region +86-532-86907286
Middle-East Region +86-532-86907137 Latin America Region +86-532-96907335
Africa Region +86-532-86908002 Russian Region +86-532-66907081

Specifications and designs are subject to change without prior notice. Machines shown may include optional parts.
The above parameters are subject to change without notice, the illustrations in text is not always the type of standard models.

956.2.indd 12 2018/9/23 星期日 21:43:09

You might also like