Scribd
Upload
3K views3 pages

MCQ Test: Unit - Ii

This document contains a 17 question multiple choice test on Industrial Engineering & Operation Research - II, specifically relating to reliability, maintainability, and failure analysis. The questions cover topics such as how reliability relates to production and maintenance costs, definitions of reliability metrics like MTBF and MTTR, uses of the bath tub curve model, factors that influence downtime, specifications of reliability, types of maintenance practices, and calculations involving availability. The test is assessing understanding of key reliability and maintenance concepts as they apply to industrial equipment and systems.

Uploaded by

Nitesh Asthana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
3K views3 pages

MCQ Test: Unit - Ii

This document contains a 17 question multiple choice test on Industrial Engineering & Operation Research - II, specifically relating to reliability, maintainability, and failure analysis. The questions cover topics such as how reliability relates to production and maintenance costs, definitions of reliability metrics like MTBF and MTTR, uses of the bath tub curve model, factors that influence downtime, specifications of reliability, types of maintenance practices, and calculations involving availability. The test is assessing understanding of key reliability and maintenance concepts as they apply to industrial equipment and systems.

Uploaded by

Nitesh Asthana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

B.

Tech – Mechanical Engineering- 4th Year


Industrial Engineering & Operation Research - II
MCQ Test
UNIT – II
Instructions: Max. Marks:
17
1. Attempt all questions.
2. All questions carry equal marks.
3. Only one answer for each question is correct, multiple answer for the same question will
fetch zero marks.
4. There is no negative marking.

Questions:

Q.1 Which among the following exhibits inversely proportional relationship with the
reliability?

a. Production cost
b. Design and development cost
c. Maintenance and repair cost
d. All of the above

Q.2 What is the failure cost of a product possessing reliability R=1?

a. Zero
b. Unity
c. Infinity
d. None of the above

Q.3 What is /are the major purpose/s of using a bath tub curve?

a. To determine the capital maintenance in defense equipments


b. To compute lifts in the distillation column
c. To decide the maintenance of equipment
d. All of the above

Q.4 What would happen, if an equipment possesses reliability and maintainability to the
maximum extent in accordance to MTTR?

a. Failure rate is higher & downtime is longer


b. Failure rate is lower & downtime is longer
c. Failure rate is higher & downtime is shorter
d. Failure rate is lower & downtime is shorter
 Q.5 On which factors does the down-time of an equipment at the maintainability phase,
depend?

a. Design
b. Installation
c. Both a & b
d. None of the above

Q.6 How is the reliability of a product specified?

a. Always less than 1


b. Always greater than 1
c. Always equal to 1
d. None of the above

Q.7 Which type of maintenance is associated or concerned with an elimination of failures


during the operational level of an equipment?

a. Preventive
b. Predictive
c. Breakdown
d. Capital
Q.8 Which among the below mentioned parameters is/are associated with the quality of a
device?

a. Time & environmental conditions


b. Numerical value
c. Manufacturing of a unit
d. All of the above
Q.9 According to exponential law of reliability, the relationship between the reliability and
the system failure due to consistency in occurrence of failure rate, can be generally expressed
as _________

a. R = λt
b. R = -λt
λt
c. R = e 
- λt
d. R = e

Q.11 The time elapsed from the point the machine fails to perform its function to the point it
is repaired and brought into operating condition is known as:

a. Down time
b. Break Down time
c. Both (a) and (b)
d. Idle time
Q.12 Maintenance consist of the following action(s)

a. Replace of component
b. Repair of component
c. Service of component
d. All of the above

Q.13 The following is not a classification of maintenance

a. Corrective maintenance
b. Timely maintenance
c. Scheduled maintenance
d. Preventive maintenance

Q.14 Scheduled maintenance is _______ between breakdown maintenance and the preventive
maintenance.

a. Joint
b. Compromise
c. Bridge
d. In

Q.15 Belt of an electric motor is broken, it needs

a. Corrective maintenance
b. Scheduled maintenance
c. Preventive maintenance
d. Timely maintenance

Q.16 What is the availability of a software with the following reliability figures?
Mean Time Between Failure (MTBF) = 25 days
Mean Time To Repair (MTTR) = 6 hours

a. 1%
b. 24%
c. 99%
d. 99.009%
Q.17 Measure of reliability is given by ______ .

a. Mean Time between success.


b. Mean reliable
c. Mean Time between failure (MTBF).
d. MTTR

You might also like