SAFETY DATA SHEET

Polyken 221, 231

1. IDENTIFICATION

Product Name Polyken 221, 231

Recommended use of the chemical and
restrictions on use
Identified uses Pressure Sensitive Adhesive
Company Identification Berry Plastics Corporation
25 Forge Parkway
Franklin, MA 02038
Customer Information Number (800) 248-7659 (Monday – Friday 8:00 am to 5:00 pm)
[email protected]
Emergency Telephone Number
Chemtrec Number Within USA and Canada: 1-800-424-9300 CCN22955
Outside USA and Canada: +1 703-741-5970 (collect
calls accepted)
Issue Date June 26, 2014
Supersedes Date March 8, 2010
Safety Data Sheet prepared in accordance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and the Globally
Harmonized System of Classification and Labelling of Chemicals (GHS)

2. HAZARD IDENTIFICATION

Hazard Classification
Acute hazard to the aquatic environment – Category 1 (This classification not adopted by OSHA)

Label Elements
Hazard Symbols

Signal Word: Warning

Hazard Statements
Very toxic to aquatic life.

Precautionary Statements
Prevention
Avoid release to the environment.
Response
Collect spillage.

Revision Date: June 26, 2014 Page 1 of 7

 Berry Plastics Corporation Safety Data Sheet
Polyken 221, 231

2. HAZARD IDENTIFICATION

Storage
None
Disposal
Dispose of contents/container in accordance with local regulation.

Other Hazards
None identified.

Specific Concentration Limits

The values listed below represent the percentages of ingredients of unknown toxicity.
Acute oral toxicity 20 - 30%
Acute dermal toxicity 40 - 50%
Acute inhalation toxicity 90 - 100%
Acute aquatic toxicity 90 - 100%

3. COMPOSITION/INFORMATION ON INGREDIENTS

Synonyms:
This product is a mixture.

Component CAS Number Concentration

Polymers and Resins N.A. 25 - 35%
Polymerized Rosin N.A 10 - 20%
Inorganic Compound(s) N.A. 1 - 10%
Zinc Oxide 1314-13-2 1 - 10%

4. FIRST- AID MEASURES

Description of necessary first-aid measures

Eyes
Immediately flood the eye with plenty of water. Obtain medical attention if symptoms persist.
Skin
Wash skin thoroughly with soap and water. Obtain medical attention if symptoms persist.
Ingestion
Obtain medical attention immediately.
Inhalation
Remove person to fresh air if symptoms occur. Seek medical attention if symptoms persist.

Most important symptoms/effects, acute and delayed

Aside from the information found under Description of necessary first aid measures (above) and
Indication of immediate medical attention and special treatment needed, no additional symptoms and
effects are anticipated.

Indication of immediate medical attention and special treatment needed

Notes to Physicians
Treat symptomatically.

Revision Date: June 26, 2014 Page 2 of 7

 Berry Plastics Corporation Safety Data Sheet
Polyken 221, 231

5. FIRE - FIGHTING MEASURES

Suitable Extinguishing Media

Water spray, carbon dioxide and dry chemical.

Specific hazards arising from the chemical

May release hazardous vapors during a fire.

Special Protective Actions for Fire-Fighters

Wear full protective clothing and self-contained breathing apparatus.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

Wear appropriate protective clothing.

Environmental Precautions
Prevent the material from entering drains or watercourses.

Methods and materials for containment and cleaning up

Pick up and transfer into suitable containers for recovery or disposal.

7. HANDLING AND STORAGE

Precautions for safe handling

Wear appropriate protective clothing.

Conditions for safe storage

Store away from sources of heat or ignition. Storage area should be: cool - dry - well ventilated - out of
direct sunlight - away from sources of ignition(heat, sparks, flames, pilot lights) - away from incompatible
materials (see Section 10)

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters
Exposure limits are listed below, if they exist.

Zinc Oxide
3 3
ACGIH: TLV 2 mg/m 8h TWA, respirable fraction, 15 min STEL 10 mg/m
3
OSHA: Z-1 PEL 5 mg/m , zinc oxide fume
3
OSHA: Z-1 PEL 5 mg/m , respirable fraction
3
OSHA: Z-1 PEL 15 mg/m , total dust

Appropriate engineering controls

No specific measures necessary. Good general room ventilation is expected to be adequate to control
airborne levels.

Individual protection measures

Respiratory Protection
Respiratory protection not normally required.
Skin Protection
Not required under normal conditions of use.

Revision Date: June 26, 2014 Page 3 of 7

 Berry Plastics Corporation Safety Data Sheet
Polyken 221, 231

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Eye/Face Protection
Safety glasses
Body Protection
Normal work wear.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance
Physical State Solid: Polyethylene coated cloth backing with a rubber based pressure
sensitive adhesive
Color White, silver ,black, or olive drab backing with beige adhesive
Odor Slight
Odor Threshold No data available
pH Not applicable
2
Density (g/yd ) 270 - 280
Boiling Range/Point (°C/F) Not applicable
Melting Point (°C/F) Not applicable
Flash Point (PMCC) (°C/F) Not applicable
Vapor Pressure Not applicable
Evaporation Rate (BuAc=1) Not applicable
Solubility in Water Negligible
Vapor Density (Air = 1) Not applicable
VOC (%) 0
Partition coefficient (n- Not applicable
octanol/water)
Viscosity Not applicable
Auto-ignition Temperature No data available
Decomposition Temperature No data available
Upper explosive limit No data available
Lower explosive limit No data available
Flammability (solid, gas) No data available

10. STABILITY AND REACTIVITY

Reactivity
Data is not available.

Chemical Stability
Stable under normal conditions.

Possibility of hazardous reactions

Hazardous polymerization will not occur.

Conditions to Avoid
Heat, sparks, flames - high temperatures - contact with incompatible materials

Incompatible Materials
Strong acids - bases - oxidizers

Revision Date: June 26, 2014 Page 4 of 7

 Berry Plastics Corporation Safety Data Sheet
Polyken 221, 231

10. STABILITY AND REACTIVITY

Hazardous Decomposition Products

Oxides of carbon – smoke – oxides of nitrogen – acrolein – aldehydes – alcohols – hydrocarbons –
oligomers – waxes – sulfur oxides

11. TOXICOLOGICAL INFORMATION

Acute Toxicity
Available data indicates this product is not expected to be acutely toxic.

Specific Target Organ Toxicity (STOT) – single exposure

Available data indicates this product is not expected to cause target organ effects after a single
exposure.

Specific Target Organ Toxicity (STOT) – repeat exposure

Available data indicates this product is not expected to cause target organ effects after repeated
exposure.

Serious Eye damage/Irritation

Available data indicates this product is not expected to cause eye irritation.

Skin Corrosion/Irritation
Available data indicates this product is not expected to cause skin irritation.

Respiratory or Skin Sensitization

Available data indicates this product is not expected to cause respiratory sensitization.
Polymerized rosin: Not found to be a skin sensitizer in the Guinea Pig Maximization Test (GPMT), and
showed potential for mild skin sensitization in the Local Lymph Node Assay (LLNA) test.

Carcinogenicity
Not considered carcinogenic by NTP, IARC, and OSHA.

Germ Cell Mutagenicity

Available data indicates this product is is not expected to be mutagenic.

Reproductive Toxicity
Available data indicates this product is not expected to cause reproductive toxicity or birth defects.

Aspiration Hazard
Not an aspiration hazard.

12. ECOLOGICAL INFORMATION

Ecotoxicity
Zinc Oxide:
LC50 Rainbow trout, 96h, 1.1 mg/l
EC50 Daphnia magna, 48h, 0.098 mg/l
Aquatic Chronic - Category 1, Very toxic to aquatic life with long lasting effects (ECHA classification)

Mobility in soil
No relevant studies identified.

Revision Date: June 26, 2014 Page 5 of 7

 Berry Plastics Corporation Safety Data Sheet
Polyken 221, 231

12. ECOLOGICAL INFORMATION

Persistence/Degradability
No relevant studies identified.

Bioaccumulative Potential
No relevant studies identified.

Other adverse effects

No relevant studies identified.

13. DISPOSAL CONSIDERATIONS

Disposal Methods
Dispose of in accordance with all applicable local and national regulations.

14. TRANSPORT INFORMATION

DOT CFR 172.101 Data Not Regulated

UN Proper Shipping Name Not Regulated
UN Class None
UN Number None
UN Packaging Group None
Classification for AIR Consult current IATA Regulations prior to shipping by air.
Transportation (IATA)
Environmental Hazards Not a marine pollutant

15. REGULATORY INFORMATION

United States TSCA Inventory

All components of this product are in compliance or are exempt from inventory listing requirements of the
US Toxic Substance Control Act (TSCA) Chemical Substance Inventory.

Canada DSL Inventory

All components of this product have not been verified for inclusion or are exempt from listing on the
Domestic Substance List (DSL).

WHMIS Classification
None
This product was classified in accordance with the hazard criteria of the Canadian Controlled Products
Regulations and the MSDS contains all the information required by these regulations.

California Proposition 65
This product contains the following materials which the State of California has found to cause cancer,
birth defects or other reproductive harm: None

SARA Title III Sect. 311/312 Categorization

None

SARA Title III Sect. 313

This product contains the following chemicals that are listed in Section 313 at or above de minimis
concentrations: Zinc Oxide (1314-13-2)

Revision Date: June 26, 2014 Page 6 of 7

 Berry Plastics Corporation Safety Data Sheet
Polyken 221, 231

16. OTHER INFORMATION

NFPA Ratings
NFPA Code for Flammability - 0
NFPA Code for Health - 0
NFPA Code for Reactivity - 0
NFPA Code for Special Hazards – None

HMIS Ratings
HMIS Code for Flammability - 0
HMIS Code for Health - 0
HMIS Code for Physical Hazard - 0
HMIS Code for Personal Protection - See Section 8
*Chronic

Legend
ACGIH: American Conference of Governmental Industrial Hygienists
CAS: Chemical Abstracts Service
ECHA: European Chemicals Agency
IARC: International Agency for Research on Cancer
N/A: Denotes no applicable information found or available
NTP: National Toxicology Program
OSHA: Occupational Safety and Health Administration
PEL: Permissible Exposure Limit
SDS: Safety Data Sheet
STEL: Short Term Exposure Limit
TLV: Threshold Limit Value

Information Source and References

This SDS is prepared by Hazard Communication Specialists based on information provided by internal
company references.

Prepared By: EnviroNet LLC.

The information and recommendations presented in this SDS are based on sources believed to be
accurate. Berry Plastics Corporation assumes no liability for the accuracy or completeness of this
information. It is the user's responsibility to determine the suitability of the material for their particular
purposes. In particular, we make NO WARRANTY OF MERCHANTABILITY OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, with respect to such information, and we assume no liability
resulting from its use. Users should ensure that any use or disposal of the material is in accordance
with applicable Federal, State, and local laws and regulations.

Revision Date: June 26, 2014 Page 7 of 7